Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹7.2 LAdmitted-Finance | -36.50% | ₹7.2 L | L1 | Admitted-Finance |
| 2 | L2₹7.4 L+₹15,392.29 (2.13%)Admitted-Finance | -35.00% | ₹7.4 L+₹15,392.29 (2.13%) | L2 | Admitted-Finance |
| 3 | L3₹8.1 L+₹84,780.34 (11.7%)Admitted-Finance | -28.01% | ₹8.1 L+₹84,780.34 (11.7%) | L3 | Admitted-Finance |
| 4 | L4₹11.1 L+₹3.8 L (53.3%)Admitted-Finance | -9.70% | ₹11.1 L+₹3.8 L (53.3%) | L4 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S KAROL CONSTRUCTION COMPANY L1 | M/S GUNAWAT CONSTRUCTION COMPANY BHONTWADA L2 | M/S DINESH STONE COMPANY L3 | RAJKUMAR SOLANKI L4 |
|---|---|---|---|---|---|---|---|
| .01PART- B (Item Rate Basis) | |||||||
| 1.00 | Repair of penal board for submersible pump insulated at various JPD premises including changing/repairing of capacitor/voltmeter/relay/indicating lamps for start and run position/any part to make panel board in working condition in all respact as per direction of engineer in charge. The job also includes of SD of work including freight charges of parts with machanic upto shop required if repairing of panel board if repairing of penal attended again with in warrenty period
single phase | 20 | Each | 1,000 ₹20,000 Lowest | 1,350 ₹27,000 | 1,400 ₹28,000 | 6,000 ₹1,20,000 |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
24 Aug 2026, 3:00 pmClosed
SE CIVIL JVVNL
SE CIVIL JVVNL OPH, RAM MANDIR BANI PARK JAIPUR
Annual repair of tubewell boring under the XEN (O and M) Hindaun (F.Y. 2026-27 and 2027-28)
2026_JVVNL_591577_6
E-NIT 11/2026-27
Open Tender
Civil Works
Percentage
365 days
Hindaun.
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
AO(O and M) JVVNL BTP Through NEFT/RTGS/IMPS/UPI
₹28,000
Yes
27 Aug 2026
21 Aug 2026
25 Aug 2026
21 Aug 2026
24 Aug 2026
21 Aug 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 0.001 | PART-A (Bldg.) | - | - | - | - |
| 1 | (E-112/21.3.2)
Providing & Laying of Polypropylene rope Confirming to IS:5175 for submersible pump of following sizes. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
16mm (suitable above 50mm & up to 75mm OD pipe) | 500 | Mtr. | 49 | ₹24,500 |
| - | (E-112/21.3.1)
12mm (suitable up to 50 mm OD pipe) | 600 | Mtr. | 40 | ₹24,000 |
| 2 | (P-2.19.2)
Supply & Fixing of ISI marked three core PVC flat submersible cable as per IS 694:1990 or amended up to date and conductor as per class 5 of IS 8130:1980 including making connection etc.
3 core 6.0 Sq.mm | 300 | Mtr. | 239.83 | ₹71,949 |
| - | (P-2.19.1)
3 core 4.0 Sq.mm | 500 | Mtr. | 160.17 | ₹80,085 |
| 3 | 21.6.1.4
SITC of Radial / mixed flow ISI marked water and anti-corrosive liquid filled submersible motor pump sets suitable for 100/150mm dia borewell. The size of adopter fixed on top of the motor should exceed the top of coupler , for safegaurd the coupler. The construction material of motor and pump should match IS: 8034 : 2018 and IS: 9283 guideline. The radial flow pumpset should operate at 5 star energy efficiency level of BEE and mixed flow pump set should operate at 3 star energy level of BEE, accompained by valid BEE certificate. Motor should be IE2 class as per IEC 60034-2-1: 2007, IEC 60034-30: 2008, & IS12615:2011 with required accessories including making connection suitable for Bore well. The job includes labour part of lowering of riser pipe G.I./ H.D.P.E. with rope, cables & pump, installation of complete fitting and accessories, jointing of electrical cables up to Starter. All labour for testing of submersible pumps set and supply of water to water mains, complete in all respect. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test certificate before execution. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR . 100 mm diameter Submersible pump shall have following HP Rating, phase, Head range, Discharge range respectively.
3.0 HP, 1-Ø, (40 -170)Mtr, (60- 20) LPM Copper Wound | 6 | Nos. | 36,523 | ₹2,19,138 |
| 4 | (P-2.23.3)
Supply & Fixing tube well cover of MS sheet 8mm thick at top & 5mm thick 100mm wide shroud around the edge so as to form a cap on the top end of casing pipe with GI Nipple 45cm long & two GI flanges at both ends in 80mm sizes passing through a hole in the centre of MS sheet. A 25 mm socket with end plug shall also be welded over top plate. A GI nipple having outside thread of size 1/2" (for installation pressure gauge) shall be provided & welded with 80mm GI nipple near top plate nipple shall be provided with end plug. 200mm dia | 5 | Nos. | 835.59 | ₹4,177.95 |
| 5 | (P-2.22)
Supply & Fixing M S clamp set of 50x6 mm flat from iron with nuts and bolts etc. for holding the riser pipe assembly of submersible pump set. | 5 | Nos. | 589.83 | ₹2,949.15 |
| 6 | (E-117/21.13.1.2)
SITC of Contactor OEM Fabricated DOL/Star-Delta Starter panel with switchgear selection as per Type-2 Cordinatiom Chart and made out from 1.6 mm thick powder coated CRCA sheet, enclosure comprising of over load protection relay, short circuit & single phasing protection, Illuminated ON / OFF push buttons, ammeter, voltmeter, indicating lamps etc. suitable for following rating motors complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR.
For single phase Submersible / Monoblock pump 2.0 HP to 3.0 HP (DOL starter) | 10 | Nos. | 6,380 | ₹63,800 |
| 7 | (E-113/21.4.1.1)
Providing & Fixing of HDPE pipe Confirming to IS:4984:2021 for water supply suitable for submersible & jet pump with required fittings ie socket, elbows, tee etc. complete in all respect. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure "A" attached with this BSR .
for vertical installation 40 mm OD 6 kg / cm2 | 800 | Mtr. | 78 | ₹62,400 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 3.11 MB
Tendernotice_2.pdf
PDF • 2.31 MB
BOQ_1050441.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .