8121/SAR-56/E8 REPAIR/REPLACEMENT OF JOINERY, CUPBOARDS ETC IN DOMESTIC AND TECH AREA AND PROVN OF SOIL INVESTIGATION AT PROPOSED SITE OF MAFI POWER STATION AT AF STN SARSAWA UNDER GE (AF) SARSAWA

Amount

Taking down shutter of any description exceeding 1 Square Metre and not exceeding 2 Square Metre each complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 Square Metre but not exceeding 04 Square Metre each including cutting holes required for taking out existing hold fast etc. complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam sheet instead of wood grain printed PVC sheet reinforced with M.S. Square tube, and fixing in opening as directed by Engr-in-Charge complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded prelam PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and prelam PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of prelam both side PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, stile & rails feathered at edges, suppling & fixing in the frame at site complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing.complete all as specified and as directed.

S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.complete all as specified and as directed.

S&F 35mm thick IInd class hard wood factory made panelled door shutter with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. the size of rail and stiles as per IS: 1003 (part-I), kiln seasoned and chemically pressure treated and fixed to chowkats complete all as specified and as directed. Note : door shutter width not exc 0.85m with single shutter each door but door shutter width exc 0.85m two panel shutter each door without any extra cost.

S&F 35 mm thick IInd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed. Note : door shutter width not exc 0.85m with single shutter each door but door shutter width exc 0.85m two panel shutter each door without any extra cost.

M&L 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides compete all as specified and directed by Engr-in-Charge.

M&L for preparing new untreated wooden surfaces of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer complete all as specified and directed.

M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete & making good the floors/walls in PCC 1:2:4 type B-0 to match the existing floors/walls complete all as directed.

M&L for mild steel work with Hat iron as in clamps , hold fasts; wall ties, plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as directed.

M&L for IInd class hard wood plain solid straight chowkat and frame wrought framed rebatted on the solid rounded or chamfered put together with glue pinned at joint complete all as specified and as directed.

Supply and fixing stainless steel butt hinges 100mm long medium weight cold pressed for fixing in steel/angle iron frames by welding/screws complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 150mm size of extruded section, ISI marked & fixed complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt 200mm size of extruded section, ISI marked & fixed complete all as specified and as directed.

S&F extruded aluminium alloy handles 150mm size fabricated type anodised. ISI marked. complete all as specified and as directed.

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F anodized aluminium frame with powder coating (minimum thickness 50 micron) and other sections for doors, windows, ventilators & partitions, with one or more rebates including joining cleat for fixing etc. complete all as specified & as directed.

S&F anodized aluminium door shutters, aluminium section weighing 0.55 kg/m, with powder coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodized aluminum snap beading screws etc. complete all as specified & as directed.

S&F door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width and weight between 36 to 60 Kg and fixed complete all as specified & as directed.

S&F anodized aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m,with powder coating (minimum thickness 50 micron) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No.), hinges type B-21 100mm long (2 Nos), suitable handle (1 No.) complete all as specified & as directed.

Supply only 5mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sqm in each complete pane all as specified and directed by Engr-in-Charge

Supply only 5mm thick Froasted glass in squares n exc 0.5 sqm in each pane complete all as specified and directed by Engr-in-Charge

Supply only 5mm thick Tinted Coloured glass fixed to metal frame complete all as specified and directed.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed

S&F anodized aluminium grill with powder coating 6mm dia aluminium bar, size of mesh 50mm by 50 mm (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.

S&F Factory made steel windows, box type,any size[ (XW2)M/F] double shutter, one openable shutter with galzing bars and other openable shutter without glazing bars, fabricated with members of standard sizes as shown on drawings including frames complete all as shown on drg no- (Drg No. CE(AF) WAC Palam Delhi Drg No -CEAF/STD-184-2012 . (Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Grills, sheet glass,iron mongry and guard bars as shown on drg).

S&F Factory made steel ventilators, box type,any size[ (XW2)M/F] double shutter, one openable shutter with galzing bars and other openable shutter without glazing bars, fabricated with members of standard sizes as shown on drawings including frames complete all as shown on drg no- (Drg No. CE(AF) WAC Palam Delhi Drg No -CEAF/STD-184-2012 . (Note :- The quoted rates shall be deemed of lugs and FI required for fixing wire cloth, Grills, sheet glass figured type,iron mongry and guard bars as shown on drg).

S&F in repair 18/19mm thick High Density High Moisture Resistant board (HDHMR) Prelaminated both sides as in Controller's Desk ,palmet boxes,showcase,shutters of Cup Boards etc including 6mm designing teak wood beading on edges complete all as specified and as directed by Engr-in-Charge.

S&F 75mm extruded brass handles, fabricated type polished complete all as specified & directed by Engr-in-Charge.

S & F Width of flaps (when open) 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified & directed by Engr-in-Charge.

S&F FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified and as directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) of any thickness complete all as specified and directed.

M&L for false ceiling made out of E-board classic of size 595 x 595 x 4 mm thick, (as approved by GE) fixed with existing frame work complete all as per manufacurers instructionscomplete all as specified and as directed.

M&L for 9mm thick False ceiling board with ArmGyp-FB ceiling tiles of 595 x595 (as approved by GE) fixed with existing frame work fixing the board to frame complete all as per manufacurers instructions complete all as specified and as directed.

Dismantling of false ceiling grid frame work any type complete all as specified and directed.

M&L for GI frame consisting of main Tee of size 38.50 x 24.00 mm and cross Tee of size 28.50 x 24.00 mm thick made out of PGI sheet 0.30 mm thick doubled at web and single at flange, flange covered with powder coated sheet 0.25 mm thick and angle 24.00 x 24.00 x0.4 mm thick powder coated suspended with GI wire 3 mm dia and up to 2 Mtrs long complete including plugging fixing of angle to brick walls with steel rawl plugs @ 450 mm c/c complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified and as directed.

M&L for 3mm thick froasted glass and glazing with oil putty in square not exc 0.5 sqm in each pane including painting / oiling to new putty to match with the existing/new surfaces complete all as specified.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples & scrwed complete all as specified and directed

S&F in repairs powder coated stainless steel drapery rod of 25 mm inner dia (in lengths as directed) of approved colour with & including decorative bowel at both ends and pair of powder coated mild steel brackets fixed at both ends with PVC rawl plug & steel screws on walls/beam, including PVC curtain rings of matching colour @ 10cm C/C all as specified & as directed.

S&F in repairs door closer hydraulically regulated, designation No. 2, aluminium (Die cast) body, universal type (ISI marked) suitable for door shutters of 701 to 850mm in width aand weight between 36 to 60 Kg and fixed complete all as specified & as directed.

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed in repairs, with & including replacement of floor tiles if any broken during repair work and making good disturbed surfaces matching to the existing surfaces complete all as directed

Supply and fixing in repairs brass mortice lock, vertical type of size 100mm, 4 Levers with escutcheon plates & two keys fixed in aluminium frame complete all as specified and as directed.

S&F in repair of venation blinds( super quality) to window openings of makes-MAC,Sista or equvalent. complete all as specified and as directed.

S&F in repair plastic net fencing of mesh size not exc 32 x 32 mm and thickness not less than 4mm fixed to steel or wooden posts as per manufacturers instructions, Make : Shine star or equivalent complete all as specified and as directed.

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 750mm x 750mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 4.00 Kg.

S&F in repairs stainless steel Kitchen plate rack of overall minimum size 900mm x 900mm and 230mm deep, with partitions for small/large plates etc made out of stainless steel 24 Gauge, fixed with rawl plug and CP steel screws all as directed. Note : Weight of rack shall not be less than 6.00 Kg.

Taking down carefully anodized aluminium/NCL/Bombay Slinding doors/windows/ventilators frame including glazed shutters & builder’s hardware complete of any size and any description and refixing in the same opening after carrying out necessary repair & replacement of unserviceable components / hardware to make it fully functional complete all as specified & as directed. Notes :- (i) Quoted rate shall deemed to include supply & fixing of new joining cleats, aluminium beadings, glazing clips, rubbers packing,slinding rollers, stays including cutting of old styles etc & adjusting the same appropriately as directed. (ii) New aluminium sections for frame/shutters, builder’s hardware such as handles, hinges, door closure, floor door spring shall be measured & paid for separately. (iii) New Glazing shall be measured and paid separately as supply only items (iv) Loose corner joints of frame & shutters shall be tightened by providing suitable cleats made out of aluminium angle of appropriate size fixed with nut & bolts to make the joints at 90º.

Repairs to Steel window/ventilator of any type & any size by taking down Shutter, replacing defective hinge,handle & locking arrangement including necessary welding (if any) and resecuring fixed to frame complete all as specified and directed

Resecuring or easing & adjusting, without taking down shutter of any description exc 1 sqm and not exc 2 sqm each all as directed.

S&F in repair 150mm long aluminum anodised handle ISI marked complete all as specified and as directed.

S&F in repair 200mm long aluminum anodised Pull handle cISI marked complete all as specified and as directed.

S&F in repairs 150mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repairs 200mm long aluminum, anodized barrel tower bolts of extruded section complete all as specified and as directed.

S&F in repair 300mm Aluminium alloy, anodised, sliding door bolt with hasp ,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fixing in repair stainless steel hinges 100mm long medium weight to pressed steel/angle iron frames by welding/screws complete all as specified and as directed.

S&F in repair Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor Overall length of cover plate 140mm complete all as specified and as directed.

S&F in repair DOOR SEAL BOTTOM, DOOR AIR GAP RUBBER SHIELD (Best Quality) Anti Rust , Brown/white/balck colour, Black Rubber complete all as specified and as directed. Make : Sealplus or Equivalent

S&F in repair FAST DM01SS Stainless Steel Furniture Door Catcher Magnet Size No. 2 for for Wadrobe, Cupboard and Almirah Door. (SS MAT) with Mounting Screw complete all as specified and as directed.

S&F in repair anodized aluminium grill with powder coating 6mm dia aluminium bar size of mesh 50mm by 50mm (minimum thickness 50 micron) of approved pattern and fixed to the existing window/ventilator frame with CP brass/stainless steel scrwed @ 200mm center to center, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement & directed by Engr-in-Charge.

S&F in repair oil putty best Quality for used in existing window glass complete all as specified and directed by engr-in-Charge.

S&F in repair 0.56mm thick aluminum sheet fixed with nails to door shutters complete all as specified and as directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and as directed.

Dismantling of posts or struts ( wood, steel or RCC ) any section including taking out embedded portion in concrete, brick work or masonary and making good disturbed portion complete all as specified and as directed.

M&L mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 complete all as specified and as directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement compete all as specified and directed by Engr-in Charge.

Excavating in post holes in soft/ loose soils(or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed

M&L for PCC 1:3:6 type C2 (40 mm graded aggregate) Cement concrete in foundations, filling and mass-concrete complete all as specified & directed by Engr-in-Charge.

M&L for painting to new or previously untreated steel surfaces of any description over 10cm in width or girth with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces complete all as specified and directed

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings.complete all as specified and directed

M&L for Pre- painted galvalume aluminum zinc coating GI based Semi-corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L for Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc.. to store and rubbish not exc. 50m complete all as specified and directed

Forming jambs, etc., to openings (to foregoing item), with stone supplied by MES including cutting, toothings and properly bonding into old work, including facing and pointing (if necessary) to match existing work, complete

M&L for Sand stone slabs in sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc, n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed in lime mortar 1:2 or cement mortar 1:4, complete

Demolition of brick work/stone masonry built in cement/lime mortar of any mix including all quoins pillar ashlars masonry and removal complete all as specified& directed.

M & L for brick work with sub class 'B' bricks (OLD SIZE BRICKS) straight or curved on plan exc 6 mtr mean radius built in cement mortar 1:6 complete all as specified and directed.

M & L for brick work with sub class 'B' bricks , (OLD SIZE BRICKS) straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc all as directed.

M&L for rendering 10mm thick in cement mortar 1:6 on fair faces of brick masonry or concrete surfaces of walls, finished even & smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick in CM 1:4 on stone wall surfaces or other than fair faces of brick work & surfaces finished even and smooth without using extra cement mixed with water proofing compound ( water proof compound paid seperatly) complete all as specified and directed

M&L for rendering 5mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete all as specified and directed

M&L for preparation of new plastered surfaces of walls and applying one coats of Oil bound distemper over a coat of 1mm thick wall care putty of approved tint complete all as specified & directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed

Material and labour for preparation of newly plastered/unplastered surfaces of ceilings & applying three coats of white wash complete all as specified and directed

Dismentling floor , hearth or wall tiling incl cement mortar bedding (but ot backing) complete all as specified and directed

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 complete all as specified and as directed.

M&L Glazed ceramic coloured tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over 10 mm thick rendring in cm 1:4 complete all as specified & directed by Engr-in-Charge.

M&L for vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 complete all as specified and as directed.

M&L for 18/19mm thick Machine cut udaipur green marble (of any type) work (table rubbed and polished) in steps, jambs, pillars, windowcills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 complete all as specified& directed by Engr-in-Charge.

Materials and labour for carryout soil investigation / testing profiles/ proportion to determine safe bearing capacity of sub soil by conducting bore holes 150 mm dia (STP) in sub soil strata down to 10 metres depth of refusal whichever is encountered earlier inclusive field and lab investigation according to relevant specification of IS:2131, IS: 6403, IS: 1498 and IS: 2720 complete as specified and directed

Materials & labour for conducting CBR (California bearing ratio) test at site complete all as specified and directed

Materials & labour for conducting plate load test using of plate size 1.50m X 1.50 m x 1.50m complete as specified and directed

SUBHASH CHAND CONTRACTOR