Upkeeping of Pucca Toilet units at Holy Cave and Lower Holy Cave

Engagement of sweeper for unblocking of the blocked toilets.

Lettering with black Japan paint of approved brand and manufacture.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 35x35x5 mm, joints mitred and welded by angle iron 35x35x5 mm or 35x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 30 mm thick

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1 mm thick

Engagement of skilled and semi skilled labour for upkeeping of toilets and disposal of unserviceable material (Payment to be made as per actual engaged)

Engagement of skilled and semi skilled labour for electrification of toilets (Payment to be made as per actual engaged)

Providing and fixing unplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Fixing of Black granite marble on washbasin platform by way of engagement of skilled workers.

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing PTMT grating of approved quality and colour. 100 mm nominal dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with/ C.P. brass screws and washers complete.

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 150x10 mm

Providing and fixing bright finished brass door latch with necessary screws etc. complete. 250x16x5 mm

Providing and fixing bright finished brass handles with screws etc. complete : 125 mm

Providing and fixing of soap case of approved brand and design

Providing and fixing of PTMT towel ring of approved brand & design

Supply of modular wiring and switch boards and lamps of approved brand and make.

1.50mm² wire (each coil 90m)

6 Amp Modular switch

PVC pipe 25 mm

PVC bend 25 mm

Junction Box Deep Concealed

Angle Holders

12 Watt LED Lamp

4 Way Modular Box

2 Way Modular Box

1 way Modular Box

Modular Plate

MCB 10 amp

Tape Roll

Concealed light Havells 5 Watt

Heating box with top and switch

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm)

Earth work in excavation by manual means over areas for foundation , drains, cables, cesspits etc. including disposal of excavated earth upto 1mtr from cutting edge, disposed earth is to be leveled and neatly dressed in all kinds of soil

Dry random rubble masonry with hard stone in foundation and plinth: Without bond stone –Nallah

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level- 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Carriage of Cement and other material by MT from Ganderbal to Dumail

Carriage of sand and bajri by head load for an avg lead of 5 km.

Carriage of cement and other material by head load from dumping site at Panjtarni store to Site of execution at Panjtarni including loading of cement at Baltal store and unloading of the same at Panjtarni

Please Enable Macros to View BoQ information