REPAIR AND MAINTENANCE OF DG SETS, PANELS, STARTERS WITH CONNECTED ITEMS AT NAGROTA MIL STN AND 213 TRANSIT CAMP UNDER GE NAGROTA.

Amount

Dismantaling /Opening of upper portion of Disel Engine 62.5 KVA (Make : / Cumiuns) water cooled,turbo charged ,Vertical type for top over hauling, repair/ servicing of engine including taking out rediator /fuel pump,water Pump,Turbo charger etc. (a) Dismantaling/Opening of complete cyllinder head assebly rockers arms assemblypiston head assembly ,sleeves byremoving nuts &bolts for repair complete. (b) Servicing & washing of complete engine partswith kerosine oil. (c) Re-assembling of engine after replacementof UNSV/defective parts with new parts as listed in given below per Job shall be deemed to be included in this rates and testing of engineas per company recommendation after reassembling all parts as directed to the satifaction of the Engr-in -Charge. Note : Repair and Transportation charge for carrying out repair & reinstall on same installation back shall be deemed to be included in this rates.

(d) Supply inreplacement of following parts given below , rates shall be deemed to be above job included . i) Valve Exhaust -06 Nos ii)Valve inlet -06 iii)insert Valve Seat -12 Nos iv)Guide Valve -12 Nos v)Cup Injector -06 Nos vi) FIP Element -06 Nos vii) Gasket Set-01 Nos viii) Hose Pipe -01 Nos ix) Fuel Filter -02 Nos x) Lubrication Oil Filter -02 Nos xi) Super By Pass Fillter -01 Nos xii) Hose Clip Set -01 Nos xiii) Piston set Complete -06 Nos xiv Ring Set Complete -06 Nos xv) Cylinder Linner -06 Nos xvi) Connecting Rod Bearing -06 Pair xvii) Gasket Set Cylinder Head -06 Nos xvii) Calibration of Fuel Pump -01 Job xix )Head Repair Work - 01 Job xx ) Calibration of injectors of Nozzels -01 Job xxi ) Lubrication Oil Pump -01 Job xxii ) O ' Ring Set Complete -01 Nos xxiii) Set of Fuel Flexible Pipe -01 Nos xxiv) Stem Seal - 12 Nos

Dismantling /Opening of upper portion of Disel Engine 40 KVA(Make : Greaves/ Kirloskar/ Cumiuns/water cooled, turbo charged ,Vertical type for top over hauling, repair/ servicing of engine including taking out rediator /fuel pump, water Pump, Turbo charger etc (a) Dismantling/Opening of complete cylinder head assembly rockers arms assembly piston head assembly ,sleeves by removing nuts &bolts for repair complete. (b) Servicing & washing of complete engine parts with kerosene oil ( c) Re- assembling of engine after replacement of UNSV/defective parts with new parts as listed in given below per job shall be deemed to be included in this rates and testing of engine as per company recommendation after reassembling all parts as directed to the satisfaction of the Engr-in -Charge Note : Repair and Transportation charge for carrying out repair & reinstall on same installation back shall be deemed to be included in this rates

(d) Supply in replacement of following parts given below rates shall be deemed to be above job included . i) Valve Exhaust -03 Nos ii)Valve inlet -03 iii)insert Valve Seat -6 Nos iv)Guide Valve -6 Nos v)Cup Injector -03 Nos vi) Fip Element -03 Nos vii) Gasket Set-01 Nos viii) Hose Pipe -01 Nos ix) Fuel Filter -02 Nos x) Lubrication Oil Filter -02 Nos xi) Super By Pass Fillter -01 Nos xii) Hose Clip Set -01 Nos xiii) Piston set Complete -03 Nos xiv Ring Set Complete -03 Nos xv) Cyllinder Linner -03 Nos xvi) Connecting Rod Bearing -03 Pair xvii) Gasket Set Cyllinder Head -03 Nos xvii) Callibration of Fuel Pump -01 Job xix )Head Repair Work - 01 Job xx ) Callibration of injectors of Nozzels -01 Job xxi ) Lubrication Oil Pump -01 Job xxii ) O ' Ring Set Complete -01 Nos xxiii) Set of Fuel Flexible Pipe -01 Nos xxiv) Stem Seal - 6 Nos

Dismantling /Opening of upper portion of Disel Engine 12.5 KVA (Make : Cumiuns) water cooled, turbo charged ,Vertical type for top over hauling, repair/ servicing of engine including taking out rediator /fuel pump,water Pump,Turbo charger etc (a) Dismantling/Opening of complete cylinder head assembly rockers arms assembly piston head assembly ,sleeves by removing nuts &bolts for repair complete. (b) Servicing & washing of complete engine parts with kerosene oil ( c) Re- assembling of engine after replacement of UNSV/defective parts with new parts as listed in given below Per job shall be deemed to be included in this rates and testing of engineas per company recommendation after reassembling all parts as directed to the satisfaction of the Engr-in -Charge Note : Repair and Transportation charge for carrying out repair & reinstall on same installation back shall be deemed to be included in this rates

(d) Supply in replacement of following parts given below rates shall be deemed to be above job included . i) Valve Exhaust -03 Nos ii)Valve inlet -03 iii)insert Valve Seat -6 Nos iv)Guide Valve -6 Nos v)Cup Injector -03 Nos vi) Fip Element -03 Nos vii) Gasket Set-01 Nos viii) Hose Pipe -01 Nos ix) Fuel Filter -02 Nos x) Lubrication Oil Filter -02 Nos xi) Super By Pass Fillter -01 Nos xii) Hose Clip Set -01 Nos xiii) Piston set Complete -03 Nos xiv Ring Set Complete -03 Nos xv) Cylinder Linner -03 Nos xvi) Connecting Rod Bearing -03 Pair xvii) Gasket Set Cyllinder Head -03 Nos xvii) Calibration of Fuel Pump -01 Job xix )Head Repair Work - 01 Job xx ) Calibration of injectors of Nozzels -01 Job xxi ) Lubrication Oil Pump -01 Job xxii ) O ' Ring Set Complete -01 Nos xxiii) Set of Fuel Flexible Pipe -01 Nos xxiv) Stem Seal - 6 Nos

Servicing of DG Sets of capacity 250 KVA /325 KVA of make Kirloskar/ Cummins/CG/Ashok Leyland by the authorized Engineer of respective manufacturer on half yearly basis to make the DG Set continuous operational condition including the following checking all as specified and directed by Engr-in -charge (i) Removing the existing engine oil, clean the oil sump and refilling with required quantity of new engine oil 20W40 & coolant to top up .(Note :- New oil, coolant will be measured and paid separately) (ii) Checking of fan motor hub (iii) Checking exhaust and inlet manifold belt and cap screw (iv)Cleaning of radiator inside and out side thoroughly with solution (caustic soda) to the entire satisfaction of Eng-in-charge by removing and re-fixing in original position after cleaning. (v) Checking and adjusting injector and valves, tappet and replace the gasket including cost of gasket. (vi) Cleaning fuel inlet connections and screw, (vii) Checking of vibration damper and rectified. (viii) Servicing of turbocharger by checking, leakage tightening of mounting screws & nuts and replace oil. (ix) Checking water temperature safety control (x) Checking and correcting up impeller of water pump for excess play. (xi) Servicing of governer and Changing of governor oil. (xii) Checking and adjusting all fan belt. (xiii) Any other check as per manufacturer`s instructions Note:- Necessary spare parts required if any will be measured and paid under relevant items

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

All as per item No. 4 here-in-before but DG sets of capacity 180 KVA DG Set

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

All as per item no.4 here-in-before but for DG Sets of Capacity 100 KVA DG set

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

All as per item no.4 here-in-before but Diesl Engine of 62.5/ 63/50 KVA DG set

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

All as per item no.4 here-in-before but DG Sets of Capacity 40/30 KVA DG set

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

All as per item no.4 here-in-before but DG Sets of Capacity 25/20/15 KVA DG set

S & F in repairs Kit, fuel filter and ring

S & F in repairs Element for Lubrication oil filter.

S & F in repairs Kit, Element of super bypass filter.

S & F in repairs Seal, O Ring and Air cleaner.

S & F in repairs Kit Conversion

S & F in repairs Gasket, Rocker lever cover

M&L for Rewinding of armature of Dynamo/alternators of 63 KVA to 100 KVA DG Set 24 volts with `F' class copper wire to match existing gauge including dismantling of old coil , cleaning thoroughly winding with super enameled copper wire of existing size and gauge,varnishing, drying etc and fixed with dynamo/alternator properly tesing and commissioning all as specified all and directed by Engr-in-Charge.

S & F repair radiator hoses of size 40mm dia or as per existing dia and 60 cm length for 63 KVA to 10o KVA of DG set including jublee clip, clamp nuts etc are properly fixed and connected.as directed to the satifaction of the Engr-in -Charge

M&L for Rewinding of the armature of self starter of 63 KVA DG Set with `F' class copper wire as per existing gauge dismantling the old coil cleaning throghly winding with super enameled coppper conductor of existing size and gauge , varnishing drying and fixing back with self starter properly tesing and commissioning as directed to the satifaction of the Engr-in -Charge

S & F in repalacement of flexible pressure pipe for lubricant size of 60 cm length for oil and fuel connection for complete suitable for 180/100/82.5 KVA/63 KVA Engineas directed to the satifaction of the Engr-in -Charge

Supply and filling Engine oil 15W/40f make Castroll/Kirloskar/HP

S& Fill distilled water packed in sealed gallan of 5 Ltrs

Supply and filling water coolant(diluted)in radiator of make volve line or equivelent including removal of old water/coolant, all as directed by Engineer-in-Charge.

Dismantling and removing of water pump assembly of 63 KVA DG Set complete from the engine,repair/overhauling the same by replacing tornout components like bearing,impeller,bushes, oil seal,water seal,gaskets etc. reassembling,refixing and testing complete as directed to the satifaction of the Engr-in -Charge

Repair/overhauling of self starter including replacement of worn out clutch assembly,bush,spring,plunger assembly, solenoid switch,carbon brushes,brush spring etc.as directed to the satifaction of the Engr-in -Charge for the following DG Sets:-

250 KVA DG set

110/100 KVA DG Set

160 KVA DG set

62.5 KVA DG Set

20/25/40 KVA DG Set

M & L for replacement of totally damaged self starter 63 KVA to 100 KVA complete assembly suitable for any capacity of DG Set

Repair/overhauling of dynamo including replacement carbon, brushes holder, spring, commutator /slipring assembly bearing, regulator etc. of any make, type and capacity 63 KVA to 100 KVA.

Supply in replacement of electrically operated fuel shut down valve assembly complete testing and commissioning as specified and directed by Engr.in-charge including dismantling and removal of old U/S valves of 60 to 100 KVA DG set.

Servicing/repairs of AMF panel complete including cleaning resetting/adjustment of relays,calibration of time delay relays, checking and replcement of diods, if required ,resistors contactor etc. complete for any make type and capacity of DG sets.

Disconnecting and dismantling the alternator unit of DG Set from the base plate of the DG set and transporting to workshop for repair, dismantling the unit, further separating the armature from the startor carefully, cutting and taking out the burnt windings of the alternator carefully, cleaning the slots and , duly applying the insulation and assembling the stampings inserting in position in the startor including applying slot insulation and rewinding of the alternator startor winding with super enameled copper conductor of same gauge and same number of turns as that of existing one including replacement of carbon brushes tapping the windings and bringing out the coil conections for production of 3 phase 415 volt 50 HZ AC supply and preheating the windings and applying insulating varnish and drying the windings in oven and assembling the unit and transporting back to installation and fixing on base plate and coupling with the DG set and testing complete all as specified and directed.

250 KVA capacity

125/100/180 KVA capacity.

Supply & fix in replacement of diode assembly complete suitable to match the existing one of 250 KVA alternator excitor unit.

Supply & Fix in replacement of diode assembly complete suitable to match the existing one of 180/125/100KVA alternator excitor unit.

Supply & Fix in replacement of diode assembly complete suitable to match the existing one of 63/50/40/30 KVA alternator excitor unit.

Supply & Fix in replacement of diode assembly complete suitable to match the existing one of 12.5/20/25 KVA alternator excitor unit.

Supply & Fix in replacement of PVC insulated battery lead with 16 Sq.mm copper conductor cable of length 2 mtr with copper/brass clamps and lugs for fixing on battery terminals and self starter complete as specified and as directed.

Supply & Fix in replacement of rectifiers for alternators suitable for Gensets upto 40/63/82.5/100/110KVA capacity complete as specified and as directed.

Supply and fixing carbon brushes suitable for alternators upto 250 KVA gensets. complete as specified and as directed.

Supply & Fix in replacement of RPM meter complete with cable and accessories at the last range 0 to 2500 complete as specified and as directed.

Supply & Fix in replacement of water temperature gauge complete with cable and accessories at the last range 0 to 150 degree centigrate complete as specified and as directed.

Supply & Fix in replacement of oil temp gauge as per existing site requirement complete as specified and as directed.

Supply in replacement of oil pressue gauge as per existing site requirement complete as specified and as directed.

Dismantling the defective Fuel Injector Assembly of following capacity from the existing foundation and engine including taking down all electrical connections transporting to approved authorised workshop, after setting up opening the complete, connector plate, gasket & complete overhauling re- assembling the Fuel Injector after transporting back to site re-installing carrying out alignment of complete DG set reconnecting up all electrical connections testing and commissioning complete the following capacity of DG set (Note:- (a) Rate quoted shall be deemed to be inclusive making good the distrubed surfaces (b) The DG set shall be tested for the satisfaction of Engr -in -charge to achive designed parameters.

(a)180 KVA capacity DG Set

(b) 100/62.5/50 KVA DG

(c) 40/30/25/20 KVA DG

S & F in repair battery terminal brass superior quality suitable for 180 AH 12 Volts Battery

Supply and fixing in replacement of ignition switch and key of 110/100/ 82.5 KVA DG Set

Supply and fixing in replacement of ignition switch and key of 63/40 KVA DG Set

Dismantling/taking down existing AVR unit of 100 KVA DG Set of Kirloskar/Cummins/Ashok Leyland/Stanford..Kirloskar/Cummins/Ashok Leyland/Stanford., Supply and fixing in replacement of AVR unit to match the existing AVR unit, complete all as specified and directed by Eng-in charge. Make:- Kirloskar/Cummins/Ashok Leyland/Stanford.

All as per items No. 40 here-in-before but the capacity of 63 KVA

All as per items No. 40 here-in-before but the capacity of 40 KVA

S&F in replacement of contactor suitable for AMF panel contactor MNX 32 3pole 240V as per existing contactor of site.

S&F in replacement of contactor suitable for AMF panel contactor MNX 25 3pole 240V as per existing contactor of site.

S&F in replacement of contactor suitable for AMF panel contactor MNX 16 3pole 240V as per existing contactor of site

S&F in replacement maintenance free lead acid battery 12 volts 180 AH complete all as specified and as directed.

S&F in replacement maintenance free lead acid battery 12 volts 150 AH complete all as specified and as directed.

S&F in replacement maintenance free lead acid battery 12 volts 130 AH complete all as specified and as directed.

S&F in replacement maintenance free lead acid battery 12 volts 100 AH complete all as specified and as directed.

S&F in replacement on load change over switch, 63 Amp capacity, 3 phase, 4 pole, 415 volts, 50Hz, side handle operated, with and including MS sheet metal enclosure having advance neutral complete all as specified and as directed.

All as per item No 50 here-in-before but 100 Amp

All as per item No 50 here-in-before but 200 Amp

All as per item No 50 here-in-before but 400 Amp

M&L for servicing/ cleaning of MS diesel tank of DG set 180/160/100 KVA by draining out the diesel from tank, cleaning the tank with soap water/ suitable solution and painting the external surface with one coat of synthetic enamel paint of existing colour including repalcement of drain valve, outlet pipe complete all as specified and as directed.

M&L for servicing/ cleaning of MS diesel tank of DG set 62.5/40/50/25 KVA by draining out the diesel from tank, cleaning the tank with soap water/ suitable solution and painting the external surface with one coat of synthetic enamel paint of existing colour including repalcement of drain valve, outlet pipe complete all as specified and as directed.

S&F in replacement of MCCB, three pole, 400 Amp 415 volts, 50 Hz breaking capacity not less than 35 kA with adjustable thermal and adjustable magnetic protection release with spreader links, Ics = 100% Icu complete all as specified and as directed.

All as per item No 56 here-in-before but four pole, 250 Amp breaking capacity not less than 25 kA

All as per item No 56 here-in-before but four pole, 160 Amp breaking capacity not less than 25 kA

All as per item No 56 here-in-before but four pole, 125 Amp breaking capacity not less than 25 kA

All as per item No 56 here-in-before but four pole, 100 Amp breaking capacity not less than 25 kA

S&F in replacement, fan belt suitable for 12.5 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 20/25//30 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 40/50 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 62.5/63 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 100 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 180 KVA DG set complete all as specified and as directed.

All as per item No 61 here-in-before but suitable for 250 KVA DG set complete all as specified and as directed.

Dismentling/ taking down complete radiator assembly of DG set 180 KVA and transporation to market for repair by :- (i) Opening the radiator assembly with brazing/ welding for repair/ services. (ii) Cleaning of all water tube with diluted solution of HCL & cleaning with water preasure & removing the sludge and dust from inside the tank by flushing out. (iii) Repair of fins by soldring/ brazing. (iv) Repair of bottom brass water tank by soldring/ brazing. (v) Repair of radiator hose assembly. (vi) Fixing the complete radiator assembly to its orignal position and testing complete

All as per item No 68 here-in-before but DG set 100 KVA.

All as per item No 68 here-in-before but DG set 62.5 /63KVA.

All as per item No 68 here-in-before but DG set 20/25/40 KVA.

Taking Down and Shifting of Existing DG Sets and Reinstalled of 63 to 100 KVA DG Sets at another location of any Installation of GE Nagrota and reinstall connected panel with wiring Complete completeTransportation charge , any store for connection and labour charge shall be deemed to job all as specified and directed by Engineer-in-charge.

Supply & fix in replacement of copper Thimble of size 95 Sqmm and taking down of thimble from existing panel reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply & Fix in replacement of copper Thimble of size 75 Sqmm and taking down of thimble from existing panel reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply & Fix in replacement of copper Thimble of size 50 Sqmm and taking down of thimble from existing panel reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply & Fix in replacement of copper Thimble of size 35 Sqmm and taking down of thimble from existing panel reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply & Fix in replacement of 24 Volt Relay ,taking down and reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply in replacement of 12 Volt Relay ,taking down and reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply & Fix in replacement of VMMR , taking down and reconnecting up all electrical connections testing and commissioning complete as directed to the satifaction of the Engr-in -Charge

Supply and fixing in replacement of Didital volt meter 0 to 500 volt complete all as specified and directed.

Supply and fixing in replacement of Digital Amp meter 0 to 500 Amps complete all as specified and directed.

Supply and fixing in replacement of Digital Frequency meter 0 to 50 Hz complete all as specified and directed.

Supply and fixing in replacement of indicator lamp assembly complete LED type suitable for the existing system supply voltage for the existing system supply voltage 230V / 440 V AC including taking down old lamp assembly

Repair, servicing and comprehensive/ preventive maintenance of Engine part of DG set any make of Capacities 40KVA to 63 KVA, which include removal unserviceable worn out spare parts, cleaning of all components with necessary cleaning material, replacement of all spare parts and gaskets as per manufacturer spare part kit, engine oil change including overhauling, re-assembling of complete engine setting, timing setting, bleaching and engine testing, replacement of diesel filter,Engine oil filter, lubricating oil, rubber hose pipe, V belt, oil pipe, diesel pipe, repair kit, burnt oil part etc. and tightening of nuts bolts, washers greasing etc for proper running of DG sets all as directed at site complete. Note (i) Spares part, engine oil, fillters shall be measured and paid for separately. (ii) Cost of oiling, greasing, tightening of nuts, bolts and minor work etc are included in the unit rate quoted by the contractor.

Material & filling of Engine oil 20 W 40 during servicing of DG sets.

Supply and fix in replacement of Engine oil filter for DG set upto 63 KVA capacity.

Supply and fix in replacement of Diesel filter for DG set upto 63 KVA capacity.

Supply and fix in replacement of Air filter for DG set upto 63 KVA capacity.

Supply and fix in replacement of unserviceable fuel pipe for DG set upto 63 KVA capacity.

Supply and fixing in replacement of asbestos rope any dia wrapped over the exhaust pipe complete

Repair and overhauling of self starter 12 V/ 24 V of DG set, upto 63 KVA Capacity, after opening nuts and bolts complete carrying out repair/ maint work for smooth functioning, testing complete and refixed same place as directed at site. Note :- (i) (Spare parts will be measured and paid separately)

Supply and fix in replacement of unsv Field Coil to self starter 12V/24V of DG set upto 63 KVA complete.

Supply and fix in replacement of unsv Armature winding to self starter 12V/24V of DG set upto 63 KVA complete.

Supply and fix in replacement of unsv Clutch assembly to self starter 12V/24V of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Carbon Brushes to self starter 12V/24V of DG set upto 63 KVA complete

Supply and fix in replacement of Pinion Assembly to self starter 12V/24V of DG set upto 63 KVA complete

Repair and overhauling of dynamo of any DG set, upto 63 KVA capacity after opening nuts and bolts complete carrying out repair/ maint work for smooth functioning, testing complete and refixed same place as directed at site. Note :- (i) (Spare parts will be measured and paid separately).

Supply and fix in replacement of unsv Carbon Brushes to Dynmo of DG set upto 63 KVA complete

M & L for Armature rewinding to Dynmo of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Field Coil to Dynmo of DG set upto 63 KVA complete

Repair/maintenance of DG set Manual/AMF LT Panel by cleaning of all carbonized / corroded parts, checking of wiring and battery charging system if any in the panel replacement of lugs, single core copper cable 2.5 /4 Sqmm etc as required and making the panel serviceable of any size / any make including replacement of voltmeter, ammeter, power factor meter, indicator frequency meter etc all as directed by Engineer-in-Charge Note :- (i) (Spare parts like Voltmeter, Ammeter,Power Factor meter, Indicator lamp, Frequency Meter and MCB/MCCB will be measured and paid separately). (ii) Cost of Lugs, tightening of nuts, bolts replacement of wiring and other minor work etc are included in the unit rate quoted by the contractor.

Supply and fix in replacement of unsv Voltmeter, range 0 to 500 V into LT Panel of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Ammeter, as per existing type or model into LT Panel of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Frequency meter, as per existing type or model into LT Panel of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Power Factor meter, as per existing type or model into LT Panel of DG set upto 63 KVA complete

Supply and fix in replacement of unsv Indicator Lamp RYB, as per existing type or model into LT Panel of DG set upto 63 KVA complete

S&F MCB SPN 6-32 Amps 10 KA 230 volts "C" series complete Make Indoasian/Havell's /ABB/Lgrand

Supply and fix in replacement of unsv MCCB TP 63 Amps adjustable thermal and fixed magnetic ,16 KA, 415 volts complete in LT Panel of DG set upto 63 KVA complete

Supply and fix in replacement of unsv MCCB TP 100 Amps ,adjustable thermal and fixed magnetic ,16 KA, 415 volts complete in LT Panel of DG set upto 63 KVA complete

Supply and fixing battery lead of copper conductor 25 Sqmm single core fitted with lead terminal on one side and other side with brass or lead terminal ( length of wire not less than1.5 Mtrs) as per site required and connection as directed by Engineer-in-Charge

Supply and fill electrolyte distiled water to battery complete all as directed by Engineer-in-Charge.

Taking out injection nozzle from DG set transportation to authorised service centre for repairing and replacement of necessary parts calibration and re-fixing to DG set and testing complete all as directed by Engineer-in-Charge.

Material and Labour for servicing and overhauling and repairing complete alternator greasing cleaning of all stator and rotor, re-varnishing the stator and rotor winding with superior quality of varnish including heating and baking the same. Re-assembling the complete alternator, fixing in position and testing on load for the DG Set upto 63 KVA capacity Note :-(i) Cost of greasing, varnish, tightening of nuts, bolts replacement of wiring and other minor work etc are included in the unit rate quoted by the contractor.

Supply & Fixing in replacement MCCB 4 pole 160 amps 50Hz 415 volts adjustable type with reputing cap 25KA

Supply & Fixing in replacement MCCB 4 pole 250 amps 50Hz 415 volts adjustable type with reputing cap 36KA.

S &F Euroload Open execution Change Over switch suitable for panel mounted 415 V 4 pole of capacity 200 amps.

S &F Euroload SS enclosure Change Over switch suitable for panel mounted 415 V 4 pole of capacity 250 amps.

S & L cable XLPE insulated screened PVC bedded galvanized steel striper wire armoured electric power cables heavy duty with standard aluminium conductor,1100 volts grade,cross sectional area 3.5 core 50 Sqmm .Note : Excavation, returning and refilling will be measured and paid separately.

All as per ser No 119 here-in-before but 35 Sqmm 3.5 core

All as per ser No 119 here-in-before but 25 Sqmm 4 core

Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified and directed.

Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specifed and directed.

Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Sand cushioning with fine dry unwashed sand in trenches for protection of cables complete all as specified and directed.

M&L for Brick covering with width equal to length of brick as mechanical protection to cables with well burnt sub class ‘B’ (old size) bricks laid dry flat, complete all as specified and directed.

Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate in foundations, filling and mass concrete all as specified and directed.

M&L for earthing complete for bldg with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 meters below ground level) with top edge of earth plate not less than 1.5 meters below ground level connected to galvanized earth wire 4.00 mm dia by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, PCC (concrete chamber of size 300 mm x 300 mm x 300 mm inside dimension) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate with fair finish , internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire mesh of 22 gauge, 80 mm thick PCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI pit shall be filled with charcoal dust and common salt all as shown in electrical plate No 5 of MES SSR Part-I (1991) as specified including provision of 15mm dia medium grade GI pipe for earth wire protection and 20 mm dia for watering complete , all excavation and earth work & connecting the earthing to an earthing test point / main switch board as specified and testing on completion complete.

All as per item No. 128 here-in-before but using 32x6 mm GI earth strip as a earth lead & 40 mm dia light grade GI protection pipe. Note for item No. 128 & 129. (i) GI wire/strip or protection pipe 15 mm/40 mm dia upto 7.5 RM included the quoted rate. (ii) The qty above the 7.5 RM shall be measured & paid separately.

Deduction to be made from BOQ for schedule of credit (Sch 'A' Part - II) Amount of Rs.1,26,063.20 during AOC Note:- Tenderers shall not quote for this Schedule

Kalsi Engineers and contractors

M/S SOHUM ENGINEERS