REPAIR TO MASONERY, PLASTERING, FLOORING, JOINERY AND OTHER CONNECTED ITEMS AT AIR FIELD AND TECH AREA AND HIRING OF LABOUR, PLANT AND MACHINES FOR RRS EXERCISE AT 3 AFRU AND TECH AREA AT AIR FORCE STN JAISALMER

Amount

Dismantling floor, hearth or wall tiling/granite including cement mortar bedding (but not backing) removing, serviceable tiles to stone and rubbish off the premises all as specified and directed.

M&L for glazed coloured ceramic tiles in vertical surfaces 300x200x6-7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 on other then fair faces of brick work etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

M&L for non skid coloured ceramic tiles 7-8mm thick (square or rectingular)area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 etc complete.

M & L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to match over 15mm thick screed bed in CM 1:6 etc complete

M&L for 20mm thick granite ( of any type) slabs/Tiles laid in floors/treads over 15mm thick screed bed in CM (1:6), set and jointed in neat cement slurry and pointed in white cement with admixture of pigment to match the shade of granite all as specified and directed.

Ditto all as above but in skirtings/risers with 10 mm thick backing coat in CM (1:4).

Demolition of Brick work, stone/boulder or block masonry, built in cement mortar excluding ashlars facing dressed stone work and pre-cast concrete etc complete all as specified.

M&L for square rubble walling Jodhpur type brought up to courses well bonded, bedded and solidly hearted in cement mortar 1:6 etc complete all as specified.

ditto- as per Sl Item No. 16 but except stone -ditto-.

M&L for precast cement concrete (1:3:6) type C1 (20mm graded stone aggregate) solid block masonary exc 10 cm in width and set in CM (1:6)

Extra over above item for hammer dressing to face stones with maximum depressions on face from a stright edge not exc. 20 mm and dressing face beds and joints as specified to SR walling Jodhpur type brought upto courses.

M&L for keyed pointing in cement and mortar (1:4) to square rubble masonry coursed or brought upto courses etc complete all as specified and directed.

Taking down cement plaster of any description built in cement mortor complete all as specified

M&L for 15mm thick rendering in CM 1:4 on stone / concrete block masonry surfaces other than fair faces of concrete / brick is to be finished even andsmooth (without using extra lime or cement) complete all as specified.

M&L for rendering 10mm thick on stone / concrete block masonry surfaces of any description in cement mortar (1:6) is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed.

M&L 5mm thick rendering on concrete surfaces of ceiling,soffits of chajjas/drop & roof projection facia etc.in CM 1:3 finished even and smooth with out using extra cement complete all as specified.

M&L for applying 3mm thick wall care putty on wall surface complete all as specified

M&L for applying 3mm thick wall care putty on ceiling surface complete all as specified

M&L for preparation of newly plastered of wall surfaces and applying two coats of cement based paint over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for prepration of new surface plastered or unplastered applying three coats of White washing on ceiling,soffits of chajjas/drop & roof projection facia etc complete as specified.

M&L for preparation of newly plastered of wall surfaces and applying two coat of oil emulsion distemper over a coat of cement primer in different tints in sigma / camouflaging pattern as approved complete all as specified.

M&L for preparation of old decorated wall surfaces of any description and applying one coat of oil emulsion distemper of any tint etc complete complete all as specified and directed by Engr-in-charge.

M&L for preparation of old treated/ decorated external wall/roof surfaces of any storeys / height upto 10m of any description and applying one coat of exterior emulsion paint (weather coat) 1st quality in different tints/shades in sigma/ camouflaging pattern as approved complete all as specified & as directed.

Dismantling of wall and ceiling board (fiber pulp, insulation etc) or insulation board/slabs /blankets any thickness including all frame work.

M&L for galvnised steel snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 08mm thickmineral Fibre board/tiles for insulation and accoustic purposes, 600mmx 600mm in size, fixed with nail to timber frame work or with staples on snap grid in ceiling, flat or sloping and including dismantling and taking down old unserviceable ceiling board complete all as specified and directed.

M & L in repair10mm thick mineral fibre board/ tiles with lamination on inner side for insula-tion and accoustic purposes, 60x60 cm in size, fixed with sutable fixtures ,clips nails to timber frameworkorwith staples on snap grid if fixed in ceiling, flat or sloping

Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing

S&F 5mm thick PVC sheet fillet of width 35mm with U shape groove of 2mm depth at centre for wall panelling inclusive of fixing on to wall with screws to make PVC frame as per specification and drawing.

Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings

Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Taking down chowkhat with shutter (without taking off shutter from the frame) n. exc 1.5 sqm all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames exc 1.5 sq. m but n exc 4 sq. m each

Taking down shutters of any description n.exc 1 sqm each complete all as specified and directed

Taking down shutters of any description n.exc 1 Sqm and n.exc 2 Sqm each

Refixing old shutter in same opening exc 1.00 Sqm mtr and n:exc 2 Sqm in each complete all as specified.

S&F 30mm th flush shutters factory made solid core construction with block boards core and plywood face panels, commercial type on both sides (ISI marked) fixed to chowkhats complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other sectionwith gusset plates,rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooksn and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410 W (Gde E-250 Quality B)

S &F Factory made Second class hard wood 30mm thick gauzed and skeleton door shutters, divided into squares with plain chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing wire cloth any number all as specified.

S&F wood grain printed 1mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet rainforced with MS square tube 19mmx19mmx19 gauge & PDM rubber gasket wealther seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15x15mmx15 gaughe MS square tube inside the 19mmx15mm MS square tube and suitably screwed.

S&F factory made solid PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes 19mmx19mmx19gauge for stiles & 15mmx15mmx19 gauge for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail , lock rail and bottom rail on either side & as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet beading & joined together with solvent cement etc complete all as specified.

Supply and fixing wire cloth 0.56mm nominal dia of wire and avg width of aperture 1.18mm complete all as specified and directed.

Ditto but fixed in repair - ditto -

S & F 100 mm long medium weight, cold rolled mild steel Butt hinges.

S & F 100 mm long stainless steel Butt hinges.

S & F in repair 100 mm long medium weight, cold rolled mild steel Butt hinges.

Hacking out old broken glass any thickness size, quality or description from wooden frame glazed with puty or fixed with beads.

Supply and fixing 3mm thick sheet glass ordinary quality and glazing with oil putty or aluminium beads in square not exc 0.50 sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares n. exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

S&F 4.8mm thick figured glass pin head type and glazing with oil putty or aluminium beads and rubber in squares n exc 0.50 Sqmtr each pane complete all as specified and directed by Engr-in-charge.

M & L for preparation of new wood surface of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer complete all as specified and directed

M L for preparation of new steel surface of any description over 10 cm in width or girth not other wise described and applying two coat of synthetic enemal paint over one coat of red oxide primer all as specified and directed

Welding in repairs n. exc 2.5cm in length thickness of metal n.exc 6 mm complete all as specified.

S&F MS hold fast and similar article conforming to Fe-290 Gde-E-165-0 or Fe-310-o all as spfd.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregated as in cill, step and for inserting hold fast of doors and windows all as specified and directed.

Easing and adjusting of aluminium window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as spfd

Easing and adjusting of aluminium door including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as spfd

Easing and adjusting of steel door incl removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as spfd

Easing of door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws etc complete all as specified and directed by Engr-in-charge.

S&F in repairs 150mm long M.S tower bolt stove enamelled black with bright bolt etc complete all as specified and directed.

.-Ditto- as item above but aluminium anodized 150mm long

S&F in repairs M.S Sliding door bolt- 250mm long

S&F in repairs Aluminium Sliding door bolt- 250mm long

S&F in repairs M.S handle 125mm long complete all as specified and directed.

.-Ditto- item above but Aluminium handle 125mm size

S&F in repairs plain aluminium sheet 0.56mm thick fixed with screw complete all as specified.

S&F in repair Safety lever locks mild steel with 04 lever for rolling shutter complete all as specifed and directed by engineer -in-charge.

S&F aluminium (extruded section body) door closure hydraulically regulated designation No 3, universal type suitable for door shutters of 851 to 1000mm in width

Excavation over area exc n exc 1.50m deep and getting out in any type of soil as specified and directed by engineer-in-charge.

Excavation over area exc 1.50m and n exc 3.00m deep and getting out in any type of soil as specified and directed by engineer-in-charge.

Cleaning and removing surplus exavated material (Rock/Sdr/Soil) and any other inside crater/other places upto required depth and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed by Engg-in-Charge.

Machine and labour required for loading, unloading and transportation of aggregate of any size upto distance of 3 AFRU CHANDAN from Tech area Jaisalmer location as specified and directed by Engg-in-Charge.

labour only for filling of crater by stone boulder upto size 63mm above through JCB/labour including spreading rolling and consolidation of layer as specified and directed by Engg-in-Charge.

labour only for filling of crater by stone bolder upto size 20mm to 63mm through JCB/labour including spreading rolling and consolidation of layer as specified and directed by Engg-in-Charge.

labour only for filling of crater by sand in a layer of thickness 20mm including spreading ,levelling and consolidation as specified and directed by Engg-in-Charge.

Material & Labour High density polythene film (transparent colour) in single layer of 400 microne thickness of virgin quality as per ASTM D 2103, IS 2508 laid with side and end overlapping not less then 300mm complete all as specified and directed by Enggr -in-Charge.

Material and labour for formwork to face of walls, retaining walls abutments, parapets and stair case railling and similar works including attach pillasters, buttresses etc vertical or to batter for rough finished flat surfaces of conrete complete all as specified and directed by Enggr -in-Charge.

Machine and labour required for loading, unloading and transportation of sand upto distance 3 AFRU CHANDAN from Tech area Jaisalmer location as specified and directed by Engg-in-Charge.

Machine and labour required for loading, unloading and transportation of rapid hardening cement upto distance 3 AFRU CHANDAN from Tech area Jaisalmer location as specified and directed by Engg-in-Charge.

Machine and labour for loading, unloading and transportation of heavy machine like IMDM Machine etc to a specified location upto distance 3 AFRU CHANDAN from Tech area Jaisalmer and re-shifting of the same after completion of task all as specified and directed by Engg-in-Charge.

Hiring of water filled water bowser of capacity not less than 10000 Ltrs with potable water confirming with IS 456 specification at a location 3 AFRU CHANDAN/ Tech area Jaisalmer.

Hiring of crane of load carrying capacity of 5-6 ton for a day at a location3 AFRU CHANDAN/ Tech area Jaisalmer.

Hiring of JCB 4CX for a day at a location 3 AFRU CHANDAN/ Tech area Jaisalmer.

Procurment of safety measures for labours like gloves, helmet, field dress, gum boot, gogles and masket etc required during execution of work as specified and directed by Engg-in-Charge.

Material and labour for cleaning of IMDM machines with water with cleaning agent to desired satisfaction of Engg-in-Charge.

MARUDHARA CONSTRUCTION COMPANY (BID ID -3489263)