REPAIR / REPLACEMENT OF PATH, HARDSTANDING, DRAIN AND FENCING WORK IN SMQ / OUTSIDE POCKETS UNDER GE(AF) ADM AREA AT AF STATION GWALIOR

Amount

Demolition of PCC in ground floors and pavings not exc 15 cm thickness below or above ground level, complete all as specified and as directed.

M&L for providing 50 mm thick cement concrete 1:3:6 type C-2 using (20mm graded crushed stone aggregates) as sub base floor and finished even and fair including provding construction joints etc complete all as specified and directed.

M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation filling,mass concrete etc complete all as specified and directed.

M & L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M & L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment laid in floor and joints of interlocking tiles/ paver block to be filled with fine sand and broomed etc complete all as specified and directed.

Dismantling asbestos cement (corrugated ted, semi corrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance n. exc 50 m and making good surface in hard/dense soil complete all as specified and directed.

M&L Cement concrete type B1 1:2:4 (20mm graded aggregate ) as in foundation for Posts and Struts all as specified and as directed

S&F Steel work in tubular trusses including special shapedwasher etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, embedded in Concrete, brick work, masonry, etc. including taking out embedded portion and making good disturbed ground, complete all as specified and directed.

S&Fmild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, running bars, for chain link fencing including embeding in concrete and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Dismantling fencing wire mesh/ barbed wire ,any type, complete all as specified and directed.

M&L for two coats of synthetic enamelled paint over a coat of red oxide primer including preparation of new steel/iron surfaces exceeding 10cm width or girth.complete all as specified and directed

Supply only MS screw, bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut exceeding 5cm and not exceeding 10cm long and dia of bolt etc, complete all as specified and directed

Supply only galvanised chain link fencing of size 100 x 100mm aperture and dia of wire 4.00mm any size or type as approved by Engr-in -charge etc complete all as specified and directed. Note: Weight of chain link fencing shall be ascertained by BOO.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails straining bolts, etc including provision of binding wire complete all as specified and directed

Dismantling existing interlocking pavers block of any description, size and pattern and refixing the same in any location for proper matching with existing surface after carrying out the necessary repair to the under layer complete all as specified and directed (sand cushioning and sub base concrete will be measured separetely)

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc complete all as specified and directed.

M&L for brick work with subclass B bricks old size straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.

All as per item No 22.00 here-in-before but except bricks

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key & scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface and finishing surface even and smooth without using extra cement complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching, kerbs, bed blocks and like etc complete all as specified and directed

M&L cement concrete 1:3:6 type C2 using 40mm graded stone aggregate as in surface channels, bed of drains including forms/moulds etc. complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends complete all as specified and directed.

Demolition of reinforced cement concrete in ground floors etc not exceeding 15cm thickness as drain cover and similar works complete all as specified and as directed

M&L for precast reinforced concrete 1:2:4 type B1 using 20 mm graded stone aggregate for drain cover slab set in and pointed in CM 1:6 including necessary formwork complete all as specified and as directed

M&L for TMT bars 6 to 8 mm dia and over cut to length bend to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

Cleaning of existing drain of any size or shape by removing sludge /silt/ earth (liquid, semisolid & solid) completely and removing the rubbish to a distance exc 250 m but not exc 500 m and deposited where directed.

GWALIOR TRADE LINK (BID ID -3143090)

M/s Dinesh Kumar (BID ID -3150813)

J.N.R. Engineers and Builders (BID ID -3150871)

m/s vikash Engineers (BID ID -3150185)

M/s Pal Construction (BID ID -3150707)

RADHA MADHAV CONSTRUCTIONS (BID ID -3144432)

M/S YOGANSH CONSTRUCTION CO. (BID ID -3150401)

Ganga and Sons (BID ID -3140717)