PROVN OF RCC HARD STANDING AT MARSHALLING GROUND FOR 2ND LINE MT FLEET AT SRI GANGANAGAR MIL STN

Amount

Site Clearance in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge.

Rolling and consolidating by power roller 5-8 tonne capacity formation surfaces in cutting complete all as specified and directed by Engr-in-Charge.

M&L Hard core broken stone of gauge n exc 63 mm, deposited, spread and levelled in layers n exc 15 cm thick, watered and rammed (by hand roller/power roller) to a true surface complete all as specified and directed.

Removal of surplus soil to a distance beyond 50m and upto 150mtr depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge.

Returning, filling in, including spreading leveling, watering and well ramming in layers not exceeding 25 cms thick in soft/loose soil complete all as specified and directed by Engineer-in-Charge.

M&L 100 mm thick cement concrete type D2, 1:4:8 (Using 40mm graded stone aggregate) filling and mass concrete complete all as specified and directed by Engr-in-Charge.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed by Engr-in-Charge.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in path, parks, lawns, drive ways or Vehicle parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 40mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed by Engr-in-Charge.

M&L for Painting lines, dashes, arrows, letters, etc. on roads, roadside kerbs, pavements and the like exc 10cm wide two or more coats of with road marking luminous paint, white or golden yellow/black/White or as directed including priming coat as per manufacturers instruction complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete in 1:2:4 Type B1 (20mm graded stone aggregate) in surface channels and drains (Rates for necessary formwork included in quoted rates) complete all as specified and directed by Engr-in-Charge.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed by Engr-in-Charge.

Dashmesh Construction Company (BID ID -3350658)

KHANNA CONSTRUCTIONS (BID ID -3349128)

POOJA CONSTRUCTION COMPANY (BID ID -3358166)

SHIVA CONSTRUCTION COMPANY (BID ID -3350481)

Ankit Jindal And Company (BID ID -3348152)