Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.2 LAccepted-AOC | L1 | Accepted-AOC L1 bidder | |
| 2 | L2₹36.1 L+₹3.4 L (10.4%)Rejected-Finance | L2 | Rejected-Finance Other than L1 bidder | |
| 3 | L3₹38.1 L+₹5.4 L (16.4%)Rejected-Finance | L3 | Rejected-Finance Other than L1 bidder | |
| 4 | L4₹39.2 L+₹6.5 L (19.8%)Rejected-Finance 30 1 PULIN KHATICK ROAD TANGRA TANGRA KOLKATA WEST BENGAL 700015 | KOLKATA | WEST BENGAL | 700015 | L4 | Rejected-Finance Other than L1 bidder |
| Sl No | Description | Qty | Unit | KAKWANI BUILDERS L3 | M/S VSL INFRA & TRADE L1 | M/s DAS AND CO L4 | VISHWAKARMA ELECTRICAL L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Repairs/Maint of APFC LT Panel board/box upto 100 kVAR capacity including disconnecting all incoming and outgoing connection after taking necessary shut down, cleaning the carbon/rust from bus-bar, re-thimbling with new lugs/thimble of existing size, removing old burn out wiring and re-wiring with new cable of exsiting size, including replacement of un-serviceable parts complete all as specified & directed.
Note :- (i)New spares shall be measured and paid separately under relevants items .
(ii) cost of unsheathed multistranded copper conductor of size upto 2.5sqmm for internal wiring like connection of CTs deemed to be included in quoted rate.
(iii) For item No. 2 to 20 fixing charge of items are considered in item no. 1.
(iv) All calibration of meters and APFC controller to be done by contractor after fixing in position.
(v)Suitable size of copper/aluminium cable lugs to be provided by contractor for for fixing /jointing the cable in bus bar etc. | 12 | Each job | 1,500 ₹18,000 Lowest | 2,300 ₹27,600 | 4,590 ₹55,080 | 3,500 ₹42,000 |
| 2.00 | Supply only switch disconnector-fuse unit of current rating 100 Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified and as directed. | 3 | Each | 3,200 ₹9,600 | 5,000 ₹15,000 | 2,760 ₹8,280 Lowest | 6,500 ₹19,500 |
| 3.00 | Supply only switch disconnector-fuse unit of current rating 125 Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified and as directed. | 3 | Each | 4,800 ₹14,400 | 5,500 ₹16,500 | 3,030 ₹9,090 Lowest | 8,000 ₹24,000 |
| 4.00 | Supply only digital 8 step APFC controller of size 96X96 for contactor switching, operating voltage 415V Volts complete all as specified and as directed. | 4 | Each | 7,450 ₹29,800 Lowest | 8,000 ₹32,000 | 9,450 ₹37,800 | 13,000 ₹52,000 |
| 5.00 | Supply only Indoor tape insulated ring type low tension current transformers of ratio 100/5A accuracy class 1.0 for LT panel board, complete all as specified and directed. | 6 | Each | 300 ₹1,800 | 250 ₹1,500 | 1,310 ₹7,860 | 200 ₹1,200 Lowest |
| 6.00 | Supply only Indoor tape insulated ring type low tension current transformers of ratio 200/5A accuracy class 1.0 for LT panel board, complete all as specified and directed. | 6 | Each | 300 ₹1,800 | 290 ₹1,740 | 1,653 ₹9,918 | 210 ₹1,260 Lowest |
| 7.00 | Supply only 3 Phase, 415 V capacitor duty contactor ,with built in surge suppressor and encapsulated with damping resistor assembly suitable for 5 kVAr rating complete all as specified and as directed | 5 | Each | 1,450 ₹7,250 | 1,200 ₹6,000 Lowest | 1,721 ₹8,605 | 1,900 ₹9,500 |
| 8.00 | All as per item No. 7 but suitable for 10 kVAr rating complete all as specified and as directed. | 4 | Each | 1,550 ₹6,200 Lowest | 1,600 ₹6,400 | 2,328 ₹9,312 | 1,800 ₹7,200 |
| 9.00 | All as per item No. 7 but suitable for 20 kVAr rating complete all as specified and as directed. | 4 | Each | 2,400 ₹9,600 | 2,300 ₹9,200 Lowest | 3,375 ₹13,500 | 3,000 ₹12,000 |
| 10.00 | Supply only 3 Phase, 415 V power contactor of AC3 Rating 25 Amp complete all as specified and as directed. | 8 | Each | 1,350 ₹10,800 | 2,500 ₹20,000 | 1,451 ₹11,608 | 1,000 ₹8,000 Lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
22 Jul 2025, 6:00 pmClosed
GE Narangi
GE Narangi C/o 99 APO
REPAIR REPLACEMENT OF UNSV LT UNDERGROUND CABLE CAPACITOR BANKS APFC PANES LT CONTROL PANEL BATTERY BANKS AND ACCESSORIES UNDER GE NARANGI
2025_MES_716603_1
8091/B/E8
Open Tender
Civil Works
Item Rate
180 days
Guwahati
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Narangi
₹90,000
Yes
8 Sept 2025
25 Jun 2025
24 Jul 2025
25 Jun 2025
22 Jul 2025
9 Jul 2025
Amount
Repairs/Maint of APFC LT Panel board/box upto 100 kVAR capacity including disconnecting all incoming and outgoing connection after taking necessary shut down, cleaning the carbon/rust from bus-bar, re-thimbling with new lugs/thimble of existing size, removing old burn out wiring and re-wiring with new cable of exsiting size, including replacement of un-serviceable parts complete all as specified & directed. Note :- (i)New spares shall be measured and paid separately under relevants items . (ii) cost of unsheathed multistranded copper conductor of size upto 2.5sqmm for internal wiring like connection of CTs deemed to be included in quoted rate. (iii) For item No. 2 to 20 fixing charge of items are considered in item no. 1. (iv) All calibration of meters and APFC controller to be done by contractor after fixing in position. (v)Suitable size of copper/aluminium cable lugs to be provided by contractor for for fixing /jointing the cable in bus bar etc.
Supply only switch disconnector-fuse unit of current rating 100 Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified and as directed.
Supply only switch disconnector-fuse unit of current rating 125 Amp having terminal shrouds on both sides including phase barrier open execution type suitable for DIN fuse-link(4P) complete all as specified and as directed.
Supply only digital 8 step APFC controller of size 96X96 for contactor switching, operating voltage 415V Volts complete all as specified and as directed.
Supply only Indoor tape insulated ring type low tension current transformers of ratio 100/5A accuracy class 1.0 for LT panel board, complete all as specified and directed.
Supply only Indoor tape insulated ring type low tension current transformers of ratio 200/5A accuracy class 1.0 for LT panel board, complete all as specified and directed.
Supply only 3 Phase, 415 V capacitor duty contactor ,with built in surge suppressor and encapsulated with damping resistor assembly suitable for 5 kVAr rating complete all as specified and as directed
All as per item No. 7 but suitable for 10 kVAr rating complete all as specified and as directed.
All as per item No. 7 but suitable for 20 kVAr rating complete all as specified and as directed.
Supply only 3 Phase, 415 V power contactor of AC3 Rating 25 Amp complete all as specified and as directed.
Supply only 3 Phase, 415 V power contactor of AC3 Rating 32 Amp complete all as specified and as directed.
Supply only 3 Phase, 415 V power contactor of AC3 Rating 40 Amp complete all as specified and as directed.
Supply only coil for MNX 25 -MNX 40 contactor 240 V AC complete all as specified and as directed .
Supply only MNX contactor contact kit complete all as specified and as directed.
Supply only heavy duty cylindrical type capacitor of capacity 5 kVAR, suitable for operating on 440 volts 3 phase complete all as specified and as directed.
Supply only heavy duty cylindrical type capacitor of capacity 10 kVAR, suitable for operating on 440 volts 3 phase complete all as specified and as directed.
Supply only heavy duty cylindrical type capacitor of capacity 12.5 kVAR, suitable for operating on 440 volts 3 phase complete all as specified and as directed.
Supply only heavy duty cylindrical type capacitor of capacity 20 kVAR, suitable for operating on 440 volts 3 phase complete all as specified and as directed.
Supply only heavy duty cylindrical type capacitor of capacity 25 kVAR, suitable for operating on 440 volts 3 phase complete all as specified and as directed.
Supply and fixing standard duty box capacitor with inbuilt MCB of suitable rating and LED indication for indication of capacitor health of capacity 20kVAR with all necessary connection with LT panel complete all as specified and as directed.
Supply and fix in repair (FR-LSH) PVC insulated single core unsheathed multistrand copper conductor for voltage grade 1100 V of size 25 Sqmm single core complete all as specified and as directed.
Supply and fix in repair (FR-LSH) PVC insulated single core unsheathed multistrand copper conductor for voltage grade 1100 V of size 50 Sqmm single core complete all as specified and as directed.
Demolition of cement Concrete (unreinforced) of any description and in any positioncomplete all as specified and directed.
Material and labour for cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate ) as in foundation complete all as specified and directed .
Material and labour for PCC 1: 3 : 6 type C-1 (using 20 mm graded mechanically crushed stone aggregate) as in mass concrete including necessary form work for coping to the new/existing steel poles complete all as specified and directed.
Dismantling unserviceable steel poles of any size including demolition of foundation concrete and removing from site complete all as specified and directed.
Materials and labour for erection and fixing of steel tubular swaged pole type 410 SP - 31 (9.00 metres long) confirming to IS- 2713 Part I to III 1980 with and including cast iron base plate, finial taper plug, nuts, bolts and washers duly painted painted with two coats of aluminium paint over a coat of red oxide primer including preparation of surfacecomplete all as specified and as directed.
Supply and fix MCCB with Thermal - magnetic release of 80-100 Amps, 4 Pole, 415V, 25 kA, Ics=100%Icu including all accessories and taking down old unserviceable one complete all as specified and as directed
Supply and fix MCCB with Thermal - magnetic release of 160-250 Amps, 4 Pole, 415V, 36 kA, Ics=100%Icu including all accessories and taking down old unserviceable one complete all as specified and as directed
Supply and fix MCCB with Thermal - magnetic release of 268-400 Amps, 4 Pole, 415V, 36 kA, Ics=100%Icu with adjustable over load setting and adjustable short circuit setting including all accessories and taking down old unserviceable one complete all as specified and as directed
Supply and fix SS enclosure for MCCB of rating 250Amp In-built neutral link for TPN system l IK08 and IP30 protection having louvers for better heat dissipation Suitable to accommodate upto 185 sq. mm. 3 1/2 core auminum armoured cable incl taking down unsv one and refixing serviceable/ new MCCB in enclosure and connectiing existing IC/OG cable with proper dimension lugs all as specified and directed.
Material and labour in repair earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6 mm thick burried directly in ground (Earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below ground level connected to galvanised iron strip 25 X 4 mm as earth lead by means of bolts nuts, check nuts and washers of brass and as shown in electrical plate No 3 connected to earth test point including necessary excavation any type of soil, RCC chamber cover plate, wire mess, funnel, test point, 20 mm dia GI pipe light grade for protection pipe and watering etc complete and testing on completion.
Supply and fix in replacement aluminium strip 25X3.15mm with saddles and fixing screws and run through wall provided with nonconducting plank as in down conductors of lighting arrestor complete all as specified and as directed.
Supply and fix in replacement copper strip 20X3.15mm burried in ground/ fixing with saddle and screws for roof and wall as earth continuity conductor complete all as specified and as directed.
Cutting out burnt out cable end and reconnecting with providing new lugs, tapes etc. for cable of size 25 sqmm to 50 sqmm 3.5 core complete all as specified and directed.
Cutting out burnt out cable end and reconnecting with providing new lugs, tapes etc. for cable of size 70 sqmm to 95 sqmm 3.5 core complete all as specified and directed.
Cutting out burnt out cable end and reconnecting with providing new lugs, tapes etc. for cable of size 120 sqmm to 300 sqmm 3.5 core complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 300sqmm/400sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 95sqmm/120sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 70sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 50sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 35sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 25sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 16sqmm complete all as specified and directed.
Supply and fix aluminium thimble for cable of size 10sqmm complete all as specified and directed.
Taking out old unserviceable UG cable of any size/ type from trenches / wall / roof etc. for necessary repair/ replacement / re-laying works complete all as specified and as directed. ( Note : Excavation and earth work shall be measured and paid seperately).
Material and labour for relaying of faulty UG XLPE cable of size 3.5 core , 120 to 240 sqmm alongwith brick protection, sand cushioning etc as obtained from taking up/down old cable here in before in trenches/ wall/ roof etc. including cutting and jointing through cable jointing kit as required and connecting to the main switches/cut outs MCB/MCCB with necessary lugs after cutting to required length complete all as specified and as directed.
Material and labour for relaying of faulty UG XLPE cable of size 4 core ,16 to 95 sqmm alongwith brick protection, sand cushioning etc as obtained from taking up/down old cable here in before in trenches/ wall/ roof etc. including cutting and jointing through cable jointing kit as required and connecting to the main switches/cut outs MCB/MCCB with necessary lugs after cutting to required length complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 2 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 10 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 16 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 25 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 50 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 70 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 95 sqmm 4 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 120 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 150 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Material and labour for XLPE insulated, PVC sheathed, armoured, heavy duty electric under ground cable, with stranded aluminium conductor, 1100 Volts grade of size 185 sqmm 3.5 core laid in trenches /floor or fixed on wall /pole in including brass compression cable glands, terminal lugs etc, complete all as specified and as directed.
Excavation in trenches not exc 1.50 m wide and not exc 1.50 m deep for foundation or for shafts, wells cesspits,man holes etc not exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.
Excavation in trenches n.exc 1.5m wide and depth exceeding 1.5 m and not exceeding 3.00m beyond first 1.50m and getting out in soft / loose soil etc complete all as specified and as directed.
Returning filling in including spreading, levelling, watering and well ramming in layers n.exc. 25cm thick complete all as specified and directed.
Removing excavated soil to distance not exc. 50 m and depositing where directed at a level not exc. 1.5 m above the starting point etc complete all as specified and as directed.
Supply and spreading clean dry river sand in cable trenches as in cable cushioning complete all as specified and as directed. (Note: Punned thickness shall be measured and paid)
Material and labour for Sub class ‘B’ old size well burnt brick laid flat in trenches over the cable for protection of LT cable complete all as specified and as directed.
Material and labour for GI pipe light grade 40mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed.
Material and labour for GI pipe light grade 50mm bore dia with all fittings to be laid in trenches or in floors,including taking down rusted one complete all as speciffied and as directed.
Material and labour for manual boring under roads/hard standing by reqd T&P without disturbing the top surface of the road for throughing the cable in GI Pipe of n exc 80 mm dia all as specified and directed.
Refixing only serviceable GI pipe light grade 40mm bore as obtained from taking up/down cable with provision of new fittings as in protection of cable at road crossing/hard standing/pole protection fixed with clamps, including taking up/ down old pipe complete all as speciffied and as directed
Refixing only serviceable GI pipe light grade 50mm bore as obtained from taking up/down cable with provision of new fittings as in protection of cable at road crossing/hard standing/pole protection fixed with clamps, including taking up/ down old pipe complete all as speciffied and as directed.
Material and labour for complete removal of old paint by scrapping and removing for preparing surfaces of existing old steel tubular poles 8.5m/9.00m long including scrapping, brushing down old paint with emery paper and applying one coat of aluminium paint including cross arms, street light brackets etc and making strip upto 1.5m above ground level by black/yellow paint in alternate layers with numbering of poles complete all as specified and directed.
Material and labour for complete removal of existing treatment of LT Panel, box, board, cross arms etc and applying two coats synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.
Material and labour for cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 6-16 Sqmm 4 core complete all as specified and directed.
Material and labour for cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 25-50 Sqmm 3.5 core complete all as specified and directed.
Material and labour for cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 70-120 Sqmm 3.5 core complete all as specified and directed.
Material and labour for cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 150-185 Sqmm 3.5 core complete all as specified and directed.
Material and labour for cable jointing kit for LT (Earthed) grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for for aluminium Conductor cable size 240-300 Sqmm 3.5 core complete all as specified and directed.
VISHWAKARMA ELECTRICAL (BID ID -3359079)
KAKWANI BUILDERS (BID ID -3357549)
M/s DAS AND CO (BID ID -3356166)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .