SPECIAL REPAIR TO 06 X SINGLE OFFICERS LIVING SHELTERS CUBS CORNER COMD GUEST ROOM AND BUILDING NO P-140 (1-8) AT QUEENS LINE UNDER AGE B/R-III OF GE (S) JAIPUR AT JAIPUR MILITARY STATION

Amount

Dismantling ceiling board (fibre, pulp or insulation etc) any thickness including framework of any description complete all as specified and directed.

M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre, intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having curled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre (Work including design, recess etc.) complete all as specified and directed.

M&L for Seamless calcium silicate ceiling made out of 12mm thick board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self-drilling and tapping screws having Phillips head with under head cutter at 200mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48mm wide fibre tape to provide seam less finish (Work including design, recess etc.) complete all as specified and directed.

M&L for preparing untreated surface by sand paper to obtain truly smooth surface and two coats of distemper oil emulsion over a coat of alkali resistant priming paint on ceiling complete all as specified and directed. Make : Tractor Shyne (Asian), Rangoli Total Care (Berger), Beauty Smooth Finish (Nerolac), Superlac (Shalimar)

M&L for Aluminium snap grid frame work of grid size 605 x 605mm for false ceiling complete all as specified and directed.

M&L for Exposed metal frame ceiling with 12mm thick calcium silicate board of silicious and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and directed.

M&L for Vitrified ceramic light shade tiles 8mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Non-skid joint free ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surfaces, area of each tile exc 0.08 sqm but not exc 0.16 sqm, 7 to 8mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in in any position laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite 18 to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc. 1.5 sqm but not exceeding 4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc. 1.5 sqm each complete all as specified and directed.

M&L for pressed steel frames 125 x 60mm made out of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with plain cement 1:3:6 type C-1 (20mm graded aggregate) concrete complete all as specified and directed.

M&L for pressed steel frames 105 x 60mm made out of 1.25mm thick mild steel sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., and filling hollow of frame with plain cement 1:3:6 type C-1 (20mm graded aggregate) concrete complete all as specified and directed.

M&L for 40mm thick flush shutters, solid core construction, with block board core and covered with decorative face veneer with lipping/frame to match on both sides and French polishing including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till shining complete all as specified and directed.

M&L for 12mm thick veneered decorative plywood, grade BWR, type BB, grade 1 (with BWR resin) with decorative face veneers on one face and French polishing including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats till shining, fixed with screws including taking down old panelling complete all as specified and directed.

M&L for Powder coated aluminium (thickness of powder coating not less than 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete complete all as specified and directed.

M&L for Powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, side or top hung or sliding type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles complete all as specified and directed.

M&L for Powder coated aluminium (thickness of powder coating not less than 50 micron) window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed.

M&L for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with sections fixing with dash fasteners with required EPDM rubber/neoprene gasket etc. complete all as specified and directed.

M&L for 5.5mm thick sheet glass plain or tinted not exc 0.5sqm in each pane, ordinary quality and glazing in existing snap beading and neoprene/rubber gasket in aluminium frames complete all as specified and directed.

M&L for 5mm thick figured glass, pin head type not exc 0.5sqm in each pane, ordinary quality and glazing in louvers or existing snap beading and neoprene/rubber gasket in aluminium frames. complete all as specified and directed.

M&L for Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed to wooden or aluminium shutters. complete all as specified and directed.

M&L for 4 levers brass mortice lock 100mm size, vertical type with plates and handles completes all as specified and directed. ( Make: Godrej, Harrison, Link)

M&L for brass handles, cast type, polished bright 125mm long grip complete all as specified and directed.

M&L for brass barrel tower bolts 200mm long, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

M&L for brass body door stopper and rubber shoe, overall length of cover plate 140mm complete all as specified and directed.

M&L for powder coated aluminium alloy drapery (curtain) rod 25mm dia fancy type with fixing brackets and end cap studs fixed in repairs complete. complete all as specified and directed.

M&L in repairs for stainless steel (l mm thick) kitchen sink with drain board with plug, with plug, waste coupling and washers and waste pipe including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, bowl size 410 x 330 x 160mm and overall size 915mm x 460mm complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including ridge etc. complete all as specified and directed.

M&L for Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering fixed with self-tapping screws. complete all as specified and directed.

M&L for pre-painted galvalume aluminium zinc coating GI based crimped and profiled steel ridge to match roof sheet, 0.5mm thick of any colour having tensile strength of 550 Mpa, bent to required shape, fixed with self-tapping screws complete all as specified and directed.

Dismantling mild steel and structural work including grills, guard bars, plates, doors and gates etc. complete all as specified and directed.

M&L for Rolled mild steel sections as in beams, rafters, purlins, bracings fixed with cleats or other connecting plates conforming to Fe-290 (Gde E-165) complete all as specified and directed.

M&L for Steel work in square, rectangular or round pipe structural work using ERW or induction butt welded tubes conforming 1161-1979 grade ST 240 complete all as specified and directed.

M&L for mild steel framed work such as grills, railings etc. with ends of bars shouldered or riveted framed balusters and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for Mild steel plain or chequered plates conforming to Fe-290 (Gde E-165), square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.

M&L for Preparing new steel or iron surfaces of any description over 10cm width or girth and two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. Make: Apcolite Gloss (Asian), Luxol Hi-Gloss (Berger) Synthetic Hi-Gloss Enamel (Nerolac), Superlac (Shalimar)

M&L for preparing old painted steel or iron surfaces of any description over 10cm width or girth and one coats of synthetic enamel paint complete all as specified and directed. Make : Apcolite Gloss (Asian), Luxol Hi-Gloss (Berger) Synthetic Hi-Gloss Enamel (Nerolac), Superlac (Shalimar)

M&L for complete removal of exiting treatment, preparing surface by sand paper to obtain truly smooth surface and two coats of distemper oil emulsion over a coat of alkali resistant priming paint on walls complete all as specified and directed. Make : Tractor Shyne (Asian), Rangoli Total Care (Berger), Beauty Smooth Finish (Nerolac), Superlac (Shalimar)

Demolition of brick work built in cement mortar or cement lime mortar complete all as specified and directed.

M&L for brickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 using old size bricks complete all as specified and directed.

M&L for Brickwork with subclass ‘B’ burnt bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, raking out joints hacking for key, scrubbing down with water etc. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:6 on brick walls or concrete surface, finished even and smooth without using extra cement. complete all as specified and directed.

M&L for rendering 15mm thick in cement mortar 1:4 on brick walls or concrete surface, finished even and smooth without using extra cement. complete all as specified and directed.

M&L for Preparing newly plastered surfaces of walls by sand paper to obtain truly smooth surface and two coats of distemper oil emulsion over a coat of chalk whiting complete all as specified and directed. Make : Tractor Shyne (Asian), Rangoli Total Care (Berger), Beauty Smooth Finish (Nerolac), Superlac (Shalimar)

Dismantling water tanks exc 500 and not exceeding 1000 litre capacity removal from site complete all as specified and directed.

M&L for Rotational moulded polyethylene water storage tank 1000 litre capacity, cylindrical vertical with closed top, hoisted and fixed in position complete all as specified and directed.

M&L in repairs for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore dia iron pipe (minimum weight 210 gms) complete all as specified and directed.

M&L for 50mm bore low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm including fittings fixed in repair to walls, ceilings or in floors etc. complete all as specified and directed.

M&L for 32mm dia CP brass waste fittings for glazed ware basins, with long screwed shanks and flynuts, flange end bedded in red lead cement complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including removal from site complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including removal from site complete all as specified and directed.

M&L for 15mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

M&L for 20mm bore galvanised steel water tubing medium grade with all fittings complete fixed to wall and ceiling or laid in floors complete all as specified and directed.

M&L in repair for Cast copper alloy stop valves (minimum weight 750 gram), screwed down high pressure, with crutch of butterfly handle, screwed both ends for 20mm bore iron pipe or for unions complete all as specified and directed.

M&L in repairs for 15mm bore 450mm long PVC connection with 2 Nos. PTMT end nuts and washer complete all as specified and directed.

M&L in repairs for Concealed body single lever brass CP mixer for mixing hot and cold water, including exposed part kit (wall plate and spout) screwed for iron pipe 15mm bore (minimum total weight of concealed and exposed part 1400 gram) complete all as specified and directed. Make : Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L in repairs for Concealed body single lever brass CP mixer for mixing hot and cold water with dual (shower and spout) outlet exposed part kit (wall plate and shower controller knob), screwed for iron pipe 15mm bore (minimum total weight of concealed and exposed part 1500 gram) complete all as specified and directed. Make: Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L in repairs for Chromium plated cast copper alloy fancy type long body bib taps (minimum weight 575 gram) with capstan heads screwed down high pressure with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed. Make: Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L for brass chromium plated 125mm dia round or square shower rose with swivel joints, fixing in repairs to 15mm bore steel pipe or union complete all as specified and directed. Make: Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L for Vitreous China single piece floor mount wash down water closet pan (pedestal pattern), white with integrated flushing cistern with dual flushing buttons fitted with soft closing plastic seat (closed pattern) and cover complete all as specified and directed. Make: Cera, Kohler, Hindware, Parryware, Roca

M&L for 630 x 450mm size vitreous China wash basin, white, over or under counter type, cutting for and fixing in platform or erecting stand complete all as specified and directed. Make : Cera, Kohler, Hindware, Parryware, Roca

M&L in repairs for Chromium plated cast copper alloy stop valves, angle type (minimum weight 575 gram), screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe 15mm bore complete all as specified and directed. Make : Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L in repairs for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. Make : Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L fixed in repairs for Vitreous China white soap dish, approximate size 160x 160x90mm, embedded in wall complete all as specified and directed. Make : Cera, Hindware, Parryware, Roca

M&L for Vitreous China white toilet paper holder, box type fixed in repairs with chromium plated (CP) brass screws to walls complete all as specified and directed. ( Make : Cera, Hindware, Parryware, Roca)

M&L in repairs for Chromium plated cast copper alloy fancy type long body spout (minimum weight 400 gram) with round wall plate, screwed for iron pipe 15mm bore,. complete all as specified and directed. Make: Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

Demolition and breaking up PVC drain pipes and fittings 75 to 110mm dia complete all as specified and directed.

M&L for PVC (SWR) floor trap of 75mm dia outlet, plain with grating including jointing with solvent cement complete all as specified and directed.

M&L for roller blind curtain semi blackout for windows roll-up shades light filtering sun and UV protection polyester curtains with plastic cord/chain, brackets fixed with screws complete all as specified and directed.

M&L for preparing new plastered surface of wall by sand paper to obtain truly smooth surface and two coats of exterior emulsion paint by roller application over water based alkali resistant priming paint for external walls complete all as specified and directed. Make : Apex Shyne (Asian Paints), Weathercoat Anti Dustt (Berger), Excel Total (Nerolac), Hero Super Premium (Shalimar)

M&L for complete removal of exiting treatment, preparing surface by sand paper to obtain truly smooth surface, and two coats of exterior emulsion paint by roller application over water based alkali resistant priming paint for external wall complete all as specified and directed. Make : Apex Shyne (Asian Paints), Weathercoat Anti Dustt (Berger), Excel Total (Nerolac), Hero Super Premium (Shalimar)

M&L in repairs for CP brass health faucet 1.2 meter long flexible tube and wall hook complete all as specified and directed. Make : Jaquar, Marc, Kohler, Roca, Hindware, Parryware, Cera

M&L for 18mm thick wood grain printed WPC (wood plastic composite) panel fixed in repair with suitable pins, screws and adhesive in cabinets body, shutters and shelves including dismantling and taking down old boards complete all as specified and directed.

M&L for Stainless steel decorative type cabinet handles 75mm size complete all as specified and directed.

M&L for Stainless steel modular cabinet soft closing hinges with spring suitable to hold the shutter in open/shut position complete all as specified and directed.

M&L for Stainless steel grating 150 x 150mm frame with openable hinging arrangement with or without waste hole complete all as specified and directed.

M&L for 75mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L for 110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

M&L for 75mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for 110mm bore single socketed PVC (SWR) pipes in any length with rubber ring joints fixed to walls complete all as specified and directed.

M&L for 75mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

M&L for Demolition of cement concrete including cement concrete tiles in paving any thickness complete all as specified and directed.

M&L for Providing 100mm thick cement concrete 1:4:8 type D-2, using 40mm graded stone aggregate in sub base complete all as specified and directed.

Dismantling interlocking paver blocks of any description, laid dry including cleaning serviceable blocks for re-fixing and removal of unserviceable material out of MoD land complete all as specified and directed.

M&L for Providing and laying 60mm thick factory-made cement concrete M-35 grade paver blocks made by table vibratory method using PU moulds, glossy finish of approved colour, design & pattern, laying by vibratory compaction over and including 50mm thick bed of fine sand, including cutting paver blocks in required size and pattern, filling joints with sand and sweeping out surplus sand complete all as specified and directed.

Dismantling precast concrete blocks in road kerbs built in cement mortar including cleaning serviceable blocks for re-fixing and removal of unserviceable material out of MoD land complete all as specified and directed.

M&L for providing and laying factory made M-25 grade cement concrete kerb stone fixed in position to the required line, level and curvature including necessary earthwork, jointed with cement mortar 1:4, making joints with or without grooves, thickness of joints not more than 5mm (except at sharp curves) complete all as specified and directed.

Demolition of precast concrete jalli set in cement mortar complete all as specified and directed.

M&L for precast cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) louvres and jallies, 35mm thick (measured solid), including all mouldings and grooved balusters, set in cement mortar 1:4 complete all as specified and directed.

M&L for shotcreting and guniting for repair of RCC elements like slabs, beams etc. complete including as per following : Notes :-

30 mm avg thickness using prepacked dry repair mortar up to top floor level Shotcreting (Guniting) of R.C.C. components with a non shrink, single component dry spray mortar on the prepared surface if required, propping, scaffolding and safety arrangment, quality control & testing of works, the rate will also include Chipping (sub item i below) cleaning of concrete surface with wire brush ii) below, curing with curing compound, quality control and testing etc. complete as per specifications and as directed.

The dry spray shall be used at water powder ratio of 0.1, having yield of approximately 0.5 liters per kg. The dry spray mortar shall achieve compressive strength of 10 Mpa in 1 day and 40 Mpa in 28 days when tested as per ASTM C109. Flexural Strength shall be 13 MPa at 28 days as per BS 196 pt1; Tensile strength shall be 5 Mpa at 28 days as per BS 6319 pt 7;The drying shrinkage shall be less than 0.25% as per ASTM C 157.

Depth of water penetration shall be less than 25mm at 5 bar pressure after 72 hours when tested as per DIN 1048 pt 5. Chloride Penetration shall of mortar at 28 days shall be low (1000 to 2000 C) as per ASTM C 1202,etc, complete. Product used shall have CE (CE-29842) marking and compliance according to Construction Products Directive 89/106/EEC (CPD). Thickness 30mm. Surface shall be evaluated by sounding /tapping with a blunt metal instrument by engineer incharge or his representative apart from cube tests for compressive strength, under Item "Testing of Works". Item rate includes providing and fixing of 18G 50mm * 50mm G.I wire mesh to be fixed at regular height with the exposed slab reinforment either using welding or binding wirem before carrying out shotcreting works..

Chipping of plaster and unsound/weak concrete material till reinforcement bars are exposed from slabs, beams, columns etc. with standard power driven percussion type or pneumatic chisel of standard make as directed by Engineer-incharge including tapering all edges, making square shoulders of cavities etc complete and disposal of debris up for all lifts and leads.

Cleaning of concrete surface and reinforcement rust of by rust remover, including application of zinc rich coatings over rebar after rust removal process, as per direction of Engineer in charge.

M&L for Chipping the RCC surface and cleaning the rusted reinforcement and exposed surface by wire brush, mechanical device or any other established method and applying the rust removing solution of approved make and quality with cotton swab to reinforcement and allowing to dry the same for 24 hrs, brushing of loose particles and applying 1st coat of rust preventive coating of polymer and cement slurry in 1:1.5 proportion with soft brush without adding water including applying another coat of rust remover cum passivator (rust off- 100) and rust preventive 4 hrs allowing air curing for 48 hrs etc. complete all as specified and directed. Note :Rates include for scaffoiding as required.

M&L for Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for applying SBR bond chemical of approved make before applying polymer plaster/ concrete to have the perfect bond between old concrete and new concrete/ polymer plaster surface using nylon bruses scaffolding labour etc. complete all as directed

M&L for 30mm thick polymer mortar to load carrying RCC members in two layers in proportion of 1:5:15 by weight of polymer of approved make and quality, cement and quartz sand with required WC ratio for desired consistency and applying and finishing by floating, curing after initial setting time etc. as per manufacturer specification etc. complete all as specified and directed.

M&L for drilling suitable holes in reinforced cement concrete with power driven drill machine to a minimum depth of 10D (D-Dia of Bar in mm) in RCC beams, lintels, columns and slabs to introduce new steel bars including fixing the steel bars in position using Lokfix E77 a two-component epoxy anchoring material, supplied in 3:1 ratio having compressive Strength (EN196) >122 N/mm2, Flexural Strength (EN196) >66 N/mm2, E Modulus (EN ISO 527-2) 6300 N/mm2. or of equivalent make but excluding the cost of reinforcement, Anchoring chemical shall comply with ETA 21/0354, ETA 21/0518, complete all as specified and directed.

Anchoring bars for 10mm Dia

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc

M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable inclosed in PVC casing caping/ pvc conduit 20 mm width / dia medium grade with all accessories ISI marked, including MS sunken box modular type with cover sheet for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings

One light/fan/ bell point controlled by one, one way switch

One 3 pin 5 Amp socket outlet on same board with other switches.

One 3 pin 5 Amp socket outlet on independent board

All as per Item No 105 above but with 2.5 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 2.5 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

All as per Item No 105 above but with 4 Sqmm copper cable for 3 pin 15/20 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly.

S&F 230/250 volts

Modular switch 1 way 6A 1 module

Modular switch 1 way 16A 1 module

Modular Bell Push 6 A 1 Moudele

S&F Buzzer Ding Dong AC 230 volts Single pole

S&F Socket, 230/250 volts :-

6 Amp2/3 pin combined 2 Module

6/16 Amp2/3 pin combined 2 Module

M&L Ceiling rose surface bakelite 65x50mm, three terminals.

Supply & fix 20 watt LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size all as specified and directed.

Supply & fix 10 watt LED retrofit lamp ( size-2 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. All as specified and directed.

Supply and fixing of LED light fitting 1x9/10W Bulk head lumineries including LED light driver holder cnnecting up with three core flexibe copper conductor cable of suitable size.

S&F in repair factory made, sheet distribution boards, SP&N 8 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar all as specified and directed.

S&F in repair factory made, sheet distribution boards, TPN 4 ways, double door suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar all as specified and directed.

Taking down celing fan sealing cable end dismantling blades and removing fan and blade to store and refixing the same after minor repair like oiling, greasing tightening the nut bolt and connecting up including provision of cable from ceiling rose to fan etc. all as specified and directed.

Supply and fixing of fan regulator electronic mini 250 V flush type on the existing phenolic laminated sheet etc.

S&F amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning:

SP 05 to 32 Amps

SPN 32 Amps

SPN 40 to 63 Amps

S&F MCCBs 415V, 16 KA, 4 Pole, 125 Amps with connection testing and commissioning complete all as specified and directed.

M&L for Sub main wiring complete with 2 runs of 6 Sqmm single core FRLS PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn through and including PVC rigid conduit / casing capping of size 20mm width / dia and conduit accessories fixed on surface / wall celing etc including provision of 1 run of 6 Sqmm FRLS PVC insulated unsheathed cable with multistranded copper conductor as earth continuity. Note : Two Run of 6 sqmm cable & one Run of 6 sqmm earth wire alongwith PVC conduit and its accessories shall be measured as one unit length.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth wire of 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 15 mm dia " light grade " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 3 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as specified and directed. Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner.

M&L for Supplying, laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armoured, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 25 sqmm, 4 core .

Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in soft / loose soil.

Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in soft / loose soil.

Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point.

M & L Sand filling for under ground cable protection including gently punning, ramming complete all as specified and directed.

M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm all as specified and directed.

Supply and fixing of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps 240 volt all as specified and directed.

Taking down exhuast fan and removing to store and refixing the same after minor repair like oiling, greasing & tightening the nut bolt and connecing up including provision of cable from ceiling rose or connector to fan etc complete all as specified and directed.

Supply and fixing of PVC exhaust fan complete with louvers shutter, 230V 50 Hz RPM 1200 copper winding of 250mm sweep complete all as specified and directed.

M/s KAKSI ENTERPRISES (BID ID -3226897)

UNIVERSAL INFRAPROJECT PVT LTD (BID ID -3217609)

JAGDAMBA CONSTRUCTION COMPANY (BID ID -3220029)

MSR INFRATECH (BID ID -3221393)