PROVN OF HARDSTANDING FOR VEH PARKING AT APJD ZONG UNDER GE TAWANG

Amount

Surface Excavation not exc. 30 Cm deep and ave. 15 Cm deep and getting out in hard/dense soil, complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting with 8 to 12tonnepower roller, complete all as specified and directed.

M&L Hardcore of broken stone of gauge not exc. 63 mm, deposited, spread and levelled in layers n exc. 15 Cm thick, watered and rammed to a True Surface and rolled with 8 to 12 tonne power roll, complete all as specified and as directed.

M&L for 150mm thick Plain Cement Concrete 1:3:6, type C2 (using 40mm graded aggregate), as in Sub-base, etc., complete all as specified and as directed

M&L for 100mm thick Plain Cement Concrete 1:2:4, type B1 (using 20mm graded aggregate), as in Sub-base, etc., complete all as specified and as directed

M&L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound grade 'A', complete all as specified and as directed.

M&L for Forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’

Excavation in Trenches not exc. 1.50 Metre width and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil for for Foundation etc. or for Shafts, Wells, Cess Pits, Manholes, Pier Holes, etc, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Plain Cement Concrete 1:4:8,, type D2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, etc. complete all as specified and as directed.

M&L for providing PCC 1:3:6 type C-1 (20mm graded stone aggregate) as in precast cement concrete solid building blocks exc. 10cm thick in width and setting in CM 1:6, complete complete all as specified and directed.

M&L Reinforced Cement Concrete 1:2:4,type B1 (Nominal mix) (20mm graded aggregate) as Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.

M&L Formwork to Sides of Concrete Foundations, Footings, bases of Columns, Raft and Raft Beams, Sides and Soffits (if any) of foundation and plinth beams and similar work; Square, rectangular or polygonal, vertical or to batter, flat, rough finished surfaces of concrete, complete all as specified and as directed.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.

All as sper Item no. 15 here in before but 5mm and over upto 10mm dia in stirrups, spacers and binders, complete all as specified and directed.

M&L Rendering 15mm thick in Cement Mortar 1:4 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed.

M&L preparing new Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of Alkali Resistant Primer, complete all as specified and as directed.

M&L Cement Concrete 1:2:4, Type B1 (20mm graded aggregate) as in Coping, including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.

M/S TSERING DHONDUP

M/S KESANG CONSTRUCTION

M/S ARUNACHAL VIKASH

M/S NAVA BHARAT BUILDERS

M/S RHEGON CONSTRUCTION

M/S L G BUILDERS

M/S K D CONSTRUCTION