Repair and renovation of Govt Qtrs at Disket Nobra under non plan.

Amount

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge: 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing stone rubble masonry manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:In cement mortar

Renewing glass panes, with wooden fillets wherever necessary : Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm)

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand)

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Dry stone pitching, 225mm thick, including cost of stones and preparation of surface.Quarry stone incl carriage

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) incl. carriage

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 30mmincl. Carriage

Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 12mm thick.

Providing and fixing specified board medium density exterior grade (Grade I) to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately) : Flat pressed 3 layer particle board or graded wood particle board IS:3087 18mm.

providing and fixing 6mm thick plan play

Extra for using stainless steel grade 304 wire gauge with wire of dia. 0.5 mm instead of Galvanized M.S. Wire gauge with wire of dia. 0.63 mm for doors, windows and clerestory windows with necessary screws: (shutter area to be measured)

Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets 20 mm dia ( heavy type)

Providing and fixing plain lining tongued and grooved, including wooden plugs complete with necessary screws and priming coat on unexposed surface Second class Teak Wood 12 mm thick incl. carriage

Providing and fixing 8mm thick HDF flooring (Action Tessa ) with 1.5 mm thick foam including cornice.incl. carriage

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In colour such as White, Ivory, Grey, Fume Red Brown

Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade (Area of slab upto 0.5 sqm)16mm.

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work

Extra for providing opening of required size and shape for wash basin/ kitchen sink in kitchen platform, vanity counters and similar location in marble/granite / stone work including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.incl. carriage

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast Iron P or S trap, 10 litre low level P.V.C . flushing cistern including flush pipe (of approved make ) manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C pan of size 580mm

Providing and fixing wash basin with C. I brackets, 15mm C.P. brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the wall wherever required:- White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C. P. brass single hole basin mixer.

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing Stainless Steel A lSI 304 (18/ 8) kitchen sink as per I.S. 13983 with C.l. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required: 610x460mm bowl depth 200mm

Providing & fixing upto floor five level precast cement concrete solid blocks including hoisting and setting in position in cement mortar 1:3 (1cement:3 coarse sand), cost of required centring, shuttering and curing complete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20 mm nominal size)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade.Two or more coats on new work incl. carriage

Polishing on wood work with ready mixed wax polish of approved brand and manufacture on New work

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil :

Dry random rubble masonry with hard stone in foundation and plinth:Without bond stone Nallah incl carriage

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with Cement mortar 1:6 (1 Cement : 6 coarse sand)Nallah incl carriage

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) incl carriage

Centering and shuttering including strutting, propping etc. and removal of form for: a.Suspended floors, roofs, landings, balconies and access platforms.

b. Edges of slabs and breaks in floors and walls Under 20 cm wide

Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete incl. carriage

15mm Cement plaster on the rough side of single or half brick wall of mix:1 : 4 ( 1 cement : 4 fine sand) incl carriage

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic molded frame of approved make and shade with 6 mm Thick hard board backing. Rectangular shape 453x357 mm

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 200 mm

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.0 meter spacing including cutting chases and making good the wall including all joints, tee, elbow, union reducer etc complete. a.PN-16 pipe , 20 mm OD(SDR-7.4)

Providing and fixing PVC waste pipe for sink and wash basin incl fitting complete..

providing and fixing door junction.

Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.

Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighting not less than 1.970kg 15 mm nominal dia bore

Providing and fixing geyser of approved brand and make.25 ltr

Wiring for light/fan/ exhaust fan/call bell point 6 amp socket with 1.5 sqmm .PVC insulated standard copper cable in existing surface/recessed PVC conduit/PVC casing including 6 amp switch house in wooden/sheet complete as required.

Wiring for 16 amp socket outlet with 2.5 sq mm PVC insulated standard copper conductor cable in existing surface/ recessed PVC conduit/ PVC casing including wooden box/ sheet and 1.5 Sq mm PVC insulated copper conductor wire as earth wire.

Supply and Drawing Ckt. Wiring for light point and 6/10/16/20 amp single phase socket outlet with 2.5 Sq mm/ 4.0 Sq mm PVC insulated copper conductor single core standard cable in the existing surface/ recessed conduit/ raceway as required.

Supply and fixing of 1’’ inch ¾’’ inch PVC conduit/ casing capping along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Wiring for sub main wire following size of PVC insulate surface/recessed PVC conduit/casing as required 2.5 sq mm/4.0sqmm

Supply and fixing of 240 volt. Miniature circuit breaker of following ploes in the existing MCB box DB complete with connection ,testing and commissioning etc. as required. Single pole 6/10/16/20/32 amp.

Supply, laying and fixing of 16 sq mm 2 core Aluminium conductors PVC insuled and PVC sheathed.

Supplying and fixing 3/5 pin 6 amp switch socket combined on the existing switch box including connection etc. as required.

Supply and fixing 3/5 pin 16 amp switch socket combined on the existing switch board including connection etc. as required.

Supply and fixing of the following fixture including all accessories like electronic ballast, lamp etc. complete as required and as below .a) Wall angle, batten holder/ wall Modular angle, batten holder including PVC square box/ round block suitable including connection as required.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more. incl. carriage

providing and fixing LED strite light and fixing of poles complete job.

b.CFL 7/14/23 watt/LED bulb 3/7/9/12/15 watt .

nazir hussain