Repair and renovation of commmon washrooms at GZSA complex

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead : Of area of 3 sqm. and below

Dismantling of flushing cistern &( W.C. if required) of all types (C.I/PVC/Vitreous china) including stacking of useful materials near the site and disposal of unserviceable materials within 50 meters lead

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge: In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead. For thickness of tiles 10 mm to 25 mm

Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in charge: a. 1:3:6 or richer mix (i/c equivalent design mix)

1:4:8 or leaner mix (i/c equivalent design mix)

Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of alljoints, corners, junctions of pipes and masonry with polymer mixed slurry.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : Cement mortar 1:4 ( 1 cement : 4 coarse sand) Extra for half Brick masonry in superstructure above plinth level upto floor V level.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:5:10 (1 cement : 5 coarse sand : 10 graded stone / Brick aggregate 40 mm nominal size

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished without a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. 40mm thick with 20 mm nominal size stone aggregate.

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete. In all colour .

Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 coarse sand)

Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35mmthick

Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. Single socketed pipes a. 75 mm dia

110 mm dia

150 mm dia

Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. a. 110 mm diametre Single tee with door 110x110x110 mm

Single tee without door 110x110x110 mm

Plain / Door Bend 110mm

P Trap

Cowl / Terminal Guard

Coupler

b. 75 mm diametre Single tee with door 75x75x75 mm

Single tee without door 75x75x75 mm

Plain / Door Bend

Cowl / Terminal Guard

Coupler

P/F trap PVC make of self cleansing design with screwed down, including cost of cutting and making good the walls and floors 100mm inlet and 75 mm outlet

Providing and laying cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) including bed concrete as per standard design. All around P.V.C. Pipe a. 75 mm diameter PVC pipe

b. 110 mm diameter PVC pipe

c. 150 mm diameter PVC pipe

P/F G.I. pipes complete with G.I. fittings (Medium Grade) & clamps including cutting holes / chases in walls and making good the same/earth work in trenches. A. 15mm nominal bore

20 mm nominal bore

25 mm nominal bore

P/F Ball Valve (Full way valve) made of cast brass including handle: ( Ship / DRP Make) a. 15mm nominal bore

25mm nominal bore

20 mm nominal bore

P/f G.I. Union in existing G.I pipe line cutting & threading the pipe & making long screws including excavation, refilling the earth or cutting of wall & making good the same complete wherever required. A. 15 mm nom. Bore

20mm nom. Bore

25mm nom. Bore

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid.(Parryware / Hindware / Cera) all complete

Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.

Providing and fixing white vitreous china flat back lipped front urinal basin of 620 x 375 x 320 mm with PTMT waste coupling with 40 mm waste pipe complete. (Parryware / Hindware / Cera)

P/F White vitreous china urinal partition of 755x165x365mm size of (Parryware/Hindware/Cera) make and quality.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: Semi rigid pipe a. 32 mm dia

40 mm dia

Providing and fixing 15 mm nominal bore C.P. brass angle valve of approved make conforming to IS : 8931 cera,Jaquar,Hindware

Providing and fixing 15 mm nominal bore C.P. brass pressmastic urinal auto closing system with built in control cock & wall flange Jaquar Make

Providing and fixing 15 mm nominal bore C.P. brass pillar cock of approved quality conforming to IS : 8931 Pillar Cock With Lift Type Operating Knob & Base Flange jaquar Make

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 make Kerovit,Parko,Hindware

P&F Cp towel ring make cera,Jaquar,Hindware Toilet Roll Holder

P&F Cp Soap Dish Holder make cera,Jaquar,Hindware

P&F Cp grating make cera,Jaquar,Hindware

Providing and fixing toilet paper holder C.P. brass make cera,Jaquar,Hindware

Providing and Fixing Grab bar of approved brand and quality (Stainless steel ) Grab Bar (Stainless Steel) 450mm Long cera,Jaquar,Hindware

Providing & fixing hand jet of approved quality with ss braded hose pipe make cera,Jaquar,Hindware

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing uplasticized PVC connection pipe with brass unions 45 cm length 15 mm nominal bore

Removing W. Wash / dry or oil bound distemper by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including priming coat with water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work.

Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mm nominal size) finished with a floatingcoat of neat cement complete as per standard design : Inside size 90x80 cm and 60 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Cleaning of Manholes including clearing of drain pipes from manhole to manhole for making the lines fully functional and disposal of mulba from the site as directed by the engineer Incharge.

Engagement to Labour for different works a. Plumber II Class

Mazdoor

Engagement of tractor along with trolly along with labour for loading, unloading and disposal of unservicable material / mulba to the dumping ground outside University campus