PROVN OF CERTAIN REVENUE WORKS ,LBW WORKS AND SPECIAL REPAIR UNDER AGE B/R-I OF GE NORTH MAMUN.

Amount

Taking down chowkhats or frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) and refixing in other opening all as spd.

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) and refixing in other opening all as spd.

Taking down shutter 1Sqm to 2 Sqm and refixing in same opening safely,( incl minor repair ) complete all as specified

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each

Taking down shutters of any description n.exc 1 Sqm each

Taking down chowkhats of frames exc 1.50 sqm but n. exc 4.0 sqm with shutters (without taking off shutters from the frames) all as spd.

S&F in repair 18 to 20mm thick solid PVC board (one side printed with approved design & pattern) as in kitchen cabinet, cupboard and pelmet box (weight of board not less than 8.00 kg /sqm) etc fixed with screws to a any type of frame work etc complete all as specified and directed.

All as per Srl item No 7 but both side white board without printed.

M&L 0.80 mm thick PVC edge binding tape around the 18-20 mm thick PVC shutter edge colour as directed, complete all as specified and directed

S& F 150 mm size stainless steel brignt finish handle as approved by GE, fixed with Nut and bolt complete all as specified.

S&F Telescopic type Side channel of drawer of standard size incl roller for moving drawer made out of mild steel bright finish or electro galvanised ( soft close ball bearing runners) with width of flap 30mm & 60mm long comp all as sfd.

S&F stainless steel plain basket of size 17''x20''x6'', complete all as specified and directed.

S&F Stainless steel partition of size 17''x20''x6'', complete all as specified and directed.

S&F Stainless steel cutlery of size 17''x20''x6'', complete all as specified and directed.

S&F Stainless steel cup & soucer of size 17''x20''x4'', complete all as specified and directed.

S&F Stainless steel plate basket of size 17''x20''x6'', complete all as specified and directed.

S&F Stainless steel auto, zero crank hinges,fency type with concealed pattern fitted to shutters comp all as sfd,

S&F 100mm hasp and staples, safety type of alum anodised complete all as specified.

Demolitin of brickwork built in cement mortar including all quions ,arches,pillars etc but excluding ashlar facings dressed stonework and pre cast concrete articles

Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Excavation in trenches n. exc 1.50 m wide and n.exc 1.50m in depth for foundation and getting out in any type of soil, complete all as specified and directed.

Returning filling in including spreading, levelling,watering and well ramming in layers not exceeding 25cm thick.

Removal of surplus soil to a distance not exceeding 50m and depositing where directed at a level not exceeding and depositing where directed at a level not exceeding 1.5m above the starting point and disposal.

M&L PCC 1:4:8 type D-2 (using 40mm graded aggr) as in fdn filling and mass concrete all as specified.

M & L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:6) all as spd and directed

M & L for Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM (1:4) all as spd and directed

M & L for Reinforcement cement concrete M-25 ( Design mix) as in foundations including rafts, footings, foundations beams, plinth beams, bases for columns and basement slabs etc including necessary form work complete all as specified and directed.

M & L for Reinforcement cement concrete M-25 ( Design mix) as in columns, pillars, piers, posts and struts etc including necessary form work complete all as specified and directed.

M & L for Reinforcement cement concrete M-25 ( Design mix) as in beams, cantilever, bressummeres lintels over 1.50m spam including necessary form work complete all as specified and directed.

M & L for Reinforcement cement concrete M-25 ( Design mix) as in Chajja including necessary form work complete all as specified and directed

M & L for Reinforcement cement concrete M-25 ( Design mix) as in Slabs supported on walls, beams and columns in floors roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary form work complete all specified and directed

M & L for Mild steel TMT bars 10mm dia and over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips complete all as specified & directed.

M & L for Mild steel TMT bars 6 to 10mm dia ,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, (as in stirrups) hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to Fe-310-O or Fe-410-O all as specified & directed.

S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60 mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats and incl two coats of synthentic enamel paint all as specified. all as specified.

M & L for 35mm thick, 2nd class hard wood plain framed, panelled (factory made) shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces, The size of rail and stile as per IS-1003 (Part-I) (Larger size to be provided) kiln seasoned and chemically pressure treated fitted to chowkats including and applying two coats of synthetic enamel paint over a coat of pink primer. all as specified and directed

S&F anodised aluminium frame for doors, windows, ventilator with one or more rebates including joining cleat for fixing etc.including powder coating of any colour (thickness or powder coating not less than 50 Micron) complete all as specified

S&F 5.5mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aparture 1.40 mm and fixed with stainless steel wire staples all as specified.

M & L for Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.) hinges type B-21, 100mm long (2No.) suitable handle (1 No.) including powder coating of any colour (thickness or powder coating not less than 50 Micron) complete all as Specified.

S&F solid PVC wall lining/ceiling consisting of 5 mm thick prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame including dismantling the old lining/ceiling all as specified and directed.

S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling/ceiling inclusive of fixing on to wall to make PVC frame as per specifiecation all as specified and directed.

M & L preparation of Old wood or wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint all as spfd.

M&L two coats of synthetic enamel paint on old steel surfaces of any description, n.exc 10 Cms in width or girth, including preparation of surfaces, complete all as specified and directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, febricated type extruded section, ISI marked all as specified.

M & L 25mm bore Mild steel powder coated, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets, funnels etc suitable for single curtain rod, fixed etc complete all as specified and approved by GE.

M&L Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement including preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth and two coats of distemper oil emulsion complete all as specified and as directed.

M & L for Rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement including three coats of white wash all as specified and directed.

M&L for rendering or plastering work 10mm thick in CM 1:3 in fascia / edging / ceiling of Chajjas, roof projections etc, including taking out peeled off plaster / concrete and making the line in true shape and finishing the surface without using extra cement including preparing new wall surface including making surface clean, dry and free from any loose paint film, dirt, chalk, grease, fungus and algae and applying two coats of acrylic, antifungal emulsion exterior weather proof paint on external surfaces, complete all as specified..

M&L Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement complete all as specified and directed

M & L for Preparation of new plastered surface of external wall and chajjas and making the surface smooth with sand paper and priming the surface with alkali resistance primer paint for external surface, over primed surface applying two coat of cement base paint incl curing complete all as specified & directed.

M&L Preparation of old surface applying 2mm thick wall care putty and making the surface smooth and two coats of Oil bound distemper on old surface of wall surface complete all as spd and directed.(old portion)

M & L for Preparation of old surface after complete removal of existing treatment making the surface smooth and applying two coat of cement base paint over a coat of alkali-resistant priming paint all as specified & directed.

M&L two coats of white wash on surface of ceiling including preparation of old plastered surface complete all as spd and directed.

M & L for Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified

M & L for Spreading & leveling in layers n.exc. 25cm thick, well ramming including watering as required

M&L for 100 mm thk PCC 1:4:8 type D-2 as in subbase to flooring.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes and dismantling of old tiles. all as spd and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes and including 25 mm thick PCC ,type B-1(20 mm graded aggregate) all as spd and directed

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough etc complete

M&L glazed ceramic coloured tiles in vertical surface 450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match incl rendering 10mm thick in CM (1:4) and finished rough, incl dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing removing serviceable tiles to store and rubbish off the premises complete all as spd & directed.

M&L Marble work 10mm to 15mm thick (table rubbed and polished) in cooking plateform window cill etc in cement mortar including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of green/ Black Marble Bhaislana Zebra including including screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes and dismantling of existing plateform etc all as spd and directed.

M&L PCC 1:2:4 type B-0 padding as roof , surface finished even and smooth without using extra cement

M & L for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work. ( Item also applied in broken RCC chajjas and roof projection )

M & L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make Dr. Fixit or STP as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement

M & L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :- (a) Cleaning existing surface properly. (b) Applying oil bound bitumen primer @ 0.30 liter/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per liter at 25 degree centigrade on prepared surface. (c) Laying not less than 3.0mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160gsm/Sqm using butane torch by torch application with 10cm side laps and 15cm end lap. Laying of membrane. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap. (e) Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg/Sqm as prescribed by manufacture of membrane.

M & L for 40mm thick brick tiles laid on mud mortar & joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement over and including 15mm thick screed bed or bedding layer of mortar in CM 1:6 etc complete all as directed.

Supply only liquid water proofing compound

S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling etc all incl taking down of old pipe as specified.

S&Fin repair Bib taps long body for 15 mm bore pipe, cast copper alloy chromium plated complete all as specified and directed.

S&F in repair steel plate reck not less than 11 Kg as per Sample Kept in GE Office with steel screw complete all as specified and directed

S&F in repair sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1200mm x 460mm bowl size 410mm x 330mm x 160mm with waste copling and pipe complete all as specified & directed.

Demolition and breaking up drain pipes 150mm dai (salt glazed ware, AC ,PVC or reinforced concrete) set in cement mortar.

S&F in repair 100 mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears laid in floor with cement joints all as specified.

S&F in repair 100mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 100 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F PVC(SWR) pipes 110mm bore, single socketd , in any length with rubber ring joints , in any length laid in trenches or in floors

S&F PVC(SWR) pipes 75mm bore, single socketd , in any length with rubber ring joints , in any length laid in trenches or in floors

S&F PVC (SWR) bend any radius 75mm dia bore

S&F PVC (SWR) bend any radius 110mm dia bore

S&F in repair Cast Iron Branch peices, single(equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 100 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair 50mm bore sand cast iron soil waste and vent pipes ISI marked in any length with or without ears fixed to walls with clamps and cement joints all as specified.

S&F in repair 75 mm dia CI bends (any radius) diminishing pieces or tapers (larger bore measured)

S&F in repair Cast Iron Branch peices, Double (equal or unequal) ordinary or inverted (spigot or socket type), or with parrallel branches fitted with oval access doors of 75 mm bore dia complete , ISI Marked, fixed in repairs all as specified & directed.

S&F in repair cast iron cowl for 50 mm dia all as directed by Engr-in-charge.

M&L PCC 1:2:4 type B-1 (using 20mm graded aggr) as in surface channels & drains including Extra for forming fair finished drain or channel 30cm inner grith in cement concrete, using extra cement, including forms, moulds, mitred/stop ends etc.

Factory made RCC manhole cover with frame( for manhole iner opening 60 cm) complete all as spd and directed.make MAHINDRA, KAWACH

M&L,Precast cement concrete type B1 (1:2:4) (20mm graded aggregate) in landings,cover slab ,manhole cover etc,water troughs,shelves and similar articles with plain faces set in cement mortar 1:4 complete all as specified and as directed.

M&L concrete bed to drain pipes incl forming cadles in cement concrete 1:3:6 type C2 for 200 mm dia pipe.

M&L 200 reinforced cement concrete pipes class NP2 with one collar per length of pipe complete allas spd

M&L for Construction of Brick masonry Septic tank for 150 Users including inlet and outlet chamber complete all as shown in Drg No CEPZ/C-TD/013/13 sheet Nos 1/5 to 5/5 using fly ash bricks (non modular) complete all as specified and directed.

M&L for Construction of Brick masonry Soakage well 3.00 metre dia and 4.50 metre deep below inlet pipe complete all as shown in Drg No CEPZ/C-TD/013/13 sheet Nos 1/5 to 5/5 using fly ash bricks (non modular) etc complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 Cum, getting out, in any type of soil.

M& L steel iron base plate plugs, bolts, and screws of Fe 410-W(Gde-E-250 Quality -A) complete all as specified and directed.

S&F mild steel as in vertical posts, roof trusses (framed), trussed, purlins, fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces all as specified.ces including two coats of synthetic enamel paints over a coat of red oxide primer complete all as specified and directed.

S&F prepainted galvatume aluminium zinc coating GI based corrugated steel 0.50 mm thk of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw as in roof complete all as spd .

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in any type of soil , complete, all as specified.

M & L for 80mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-40 grade laid over & including cleaned dry sand cushion bed 50mm thick over & including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub-base, surface finished even and rough etc complete all as specified and directed.

M & L for 60mm thick factory made rubberised coloured (laminated) interlocking paver block (using vibro compaction method) (topping thickness not less than 5mm) in white cement and non fadable glossy pigment of approved shade of any shape and size conforming to IS-15658-2006 of M-35 grade laid over & including cleaned dry sand cushion bed 50mm thick over & including 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub-base, surface finished even and rough etc complete all as specified and directed.

Taking down carefully unsv copper/aluminium point wiring (light/fan/Bell/socket or power) complete, including fixture and fittings such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls , floors etc.

M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 volts. grade FRLS PVC insulated unsheathed cable with proper colour coding drawn in including PVC concealed conduit /existing conduit of appropriate size but not less than 20mm dia with all accessories and FRLS PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth, with inner, outer frame plates including metal flush shunken boxes with zinc oxide plated suitable size for mounting switches, sockets, fan regulators etc connecting earth dolley with PVC unsheathed flexiblke copper conductor green in color and making good to the disturbed surface of wall/floor and matching with existing specifications for the One light /fan/bell point controlled by one switch.

All as per Srl item No 2 above but one 5 pin socket outlet 5 Amps on independent board with separate switch 6 Amp one way.

All as per Srl item No 12 above but one 5 pin socket outlet 5 Amps on same board with separate switch 6 Amp one way.

All as per Srl item No. 02 above but one 15Amp socket point concealed with 2.5Sqmm FRLS PVC insulated multi-strand copper conductor including 2.5Sqmm FRLS PVC insulated unsheathed copper conductor earth wire and making good to disturbed surfaces of wall floor and matching with existing finishes complete all as specified and directed. Make : Havells/Finolex/Polycab

S&F in replacement socket modular socket 5 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed.Make : SSK (Elegance)/Legrand/Crab Tree/ Anchor (Roma)

Supply and Fixing in replacement the modular switch one way 6 Amp one module, front operated complete all as specified and directed. Make: SSK (Elegance)/Legrand/Crab Tree/ Anchor (Roma)

Supply and Fixing in replacement the modular switch piano type flush button single pole 16 Amp one module, front operated. Make: SSK (Elegance)/Legrand/Crab Tree/ Anchor (Roma)

S&F socket in replacement modular socket 6 Amp/16 Amp, 2/3 Pin multipurpose, 2 module, complete all as specified and directed. Make: SSK (Elegance)/Legrand/Crab Tree/ Anchor (Roma)

S&F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings including 14W LED Lamp complete all as specified. Make of LED Lamp: Crompton, Wipro, Syska

S&F ceiling rose PVC/polycarbonate, insulated body surface Bakelite 65mm dia three terminals. Make: Anchor/Cona/Havells.

S & F in replacement LED batten alongwith LED T8 tubular lamp 20W Linear LED T8 tubular lamp with extruded aluminium/pc body and PC diffuser and inbuilt driver, 230 volts wall mounted complete with all accesssories internally pre wired and including connecting up with three core twisted flexible copper conductor cable of suitable size including taking down old unsv tubelight fitting any type. Make of batten - Crompton batten Cat Pt No DMLN1LT8-16 and LED tube Rod Cat Pt No LTT8-20 or Make - Equivalent in Havells, philips, Bajaj and Crompton

Supply and fixing the Ventilation fan single phase 230/240 Volts of size 300mm sweep, 900RPM with louvers of metallic body including cutting hole of suitable size in the existing wall, grouting the fan with nuts and bolts and making good the disturbed surface and complete connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor 3 Core cable all as specified and directed. Make- Havells Ventil Air - DS/Supreme DLX HD /Khaitan.

S&F MCB SP 240V, 50Hz, 10 KA,of rating 6 to 32 Amp all as specified and directed. Make- Legrand/Hager/Schneider

M/S J N TRADERS