PROVN OF GUARD ROOM OF DSC GUARDS OF AFMSD AND PROVN OF DUTY ROOM FOR JCOS NCOS

Amount

Dismantling floor, hearth and wall tiles including cement mortar bedding (but not backing) and removing rubbish beyond MOD land complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in Ground floors and paving n.exe 15cm thickness ( below or above ground level ) and removing rubbish beyond MOD land complete all as specified and directed.

Dismantling of Brick tiles or terracing tiles, single layer on roofs complete and removal of rubbish beyond MOD land complete all as specified & directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of rubbish beyond MOD land complete all as specified & directed.

Dismantling roof treatment including roof plaster any type and prepararing the roof surface for roof treatment work by brooming, washing down all loose particles and removing rubbish beyond MOD land complete all as specified & directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) including removal of rubbish beyond MOD land complete all as specified & directed.

M&L for providing 75mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base flooring complete all as specified & directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping, cleaning and washing down with water to remove dust, etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18 to 20 mm thick over screed bed or bedding layer 15mm thick of cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for machine cut kota stone slab flooring 18 to 20 mm thick on vertical surface as in dado/ skirting in any height including all cutting and wastage, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and includig 10mm thick screed bed in CM 1:4 after taking down cement plaster on wall complete all as specified and directed.

M&L for Black Granite slab 18-20 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement mixed with pigment to match over and including bedding layer 15mm thick in cement mortar 1:6 over platform including rounding of exposed edges, complete all as specified & directed.

S&F for 18-20mm thick White marble (of any type) work polished both faces in partition of urinal, fixd in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including cutting chases into wall for fixing complete all as specified & directed.

S&F Non-skid ceramic coloured tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F Non-skid ceramic coloured tiles 6 to 7 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface (square/rectangular) 350x 250x 7mm/ 450X 350X 7mm /300x200x7mm, set and jointed in neat cement slurry and pointed in white or colour cement to match coloured tiles over 10mm thick screeding in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (40mm graded stone agg) for plinth protection laid in bays and finished even and fair including filling the joint with bitumen mastic in 1:1 complete all as specified and directed..

M&L for PCC 1:2:4 type B-1 using 20mm graded stone agg as in coping, kerbs, bed plates, benching and packing to CI trap including weathering, slightly rounded or chamfered angle and throating including water proofing compound and formwork complete all as specified and directed.

M&L for cement concrete 1:2:4 type B0 (using 12.50 mm graded stone aggregate) on roof padding surface finished even and smooth without using extra cement complete all as specified & directed.

M&L for mix Precast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in shelves, landings, cover slabs, chullah hoods, chajjas, water trough and similar articles including form works , set in cement mortar 1:4, complete all as specified (reinforcement shall be measured & paid for separately) complete all as specified & directed.

M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate as in surface channel and drain in fair finish complete all as specified & directed.

M & L for PCC 1:4:8 Type D2 40mm graded aggregate as in foundations, filling and mass concrete complete all as specified & directed.

M&L for 100mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) for sub-base over rammed earth finished even & fair complete all as specified & directed.

M & L for RCC M25, design mix, using 20mm graded aggregate in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, and mass concrete complete all as specified & directed.

M & L for RCC M25, design mix, using 20mm graded aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m clear span mixed cement concrete , complete all as specified & directed.

M & L for RCC M25, design mix, using 20mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified & directed.

M & L for RCC M25, design mix, using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified & directed.

M & L for RCC M25, design mix, using 20mm graded aggregate in chajjas complete all as specified & directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and beams, sides and soffits (if any) of foundation and plinth beams , and similar work, vertical or to batter, work in rough finished flat surfaces of concrete complete all as specified & directed.

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions, work in rough finished square, rectangular or polygonal surfaces of concrete complete all as specified & directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports overhangs etc, also splays between floors and beams, etc., work in rough finished flat surfaces of concrete complete all as specified & directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), work in rough finished flat surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide. (Where RCC/PCC band in walls, spanning and opening, the formwork soffit only shall be paid for under item 611), work in rough finished flat surfaces of concrete complete all as specified & directed.

Use and waste of formwork to chullah hoods, chajjas, weather shades, corbels, water troughs and similar items including edges, work in rough finished flat surfaces of concrete complete all as specified & directed.

S&F mild steel TMT bars 10mm dia and over cut to length bent to shape required including cranking, bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as spd & directed.

M & L for mild steel TMT bars 5mm dia and over upto including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally or hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed

M&L for MS 12mm square bars, cut to size as required and welded to steel window as guard bars complete all as specified & directed.

Taking down cement plaster, terrazzo dado in any thickness from brick or stone walls etc including raking out joints, hacking for key, scrubbing down and washing with water etc including removal of rubbish beyon MOD land complete all as specified and directed.

M&L for Rough cast plaster, applying the under coat of cement and sand mortar 1:3 not less than 10 mm thick and while it is still in the plastic state the roughcast mixture consisting of crushed stone of size between 6 to 12 mm mixed with coarse sand and cement in the ratio of 1: 1: 1 shall be applied and finished even complete including taking down cement plaster including raking out joints, hacking for key, scrubbing down with water, etc.and removal of rubbish beyond MOD land complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:4 on concrete or brick surfaces finished even and fair, complete all as specified and directed.

M & L for 15 mm thick rendering in cement mortar 1:6 on concrete or brick surfaces finished even and fair, complete all as specified & directed.

M & L for 5 mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling, chajja and like surface finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 10mm on fair face of concrete in CM 1:3 over roof surface using water proofing compound as per manufacturer instruction complete all as specified & directed. Note : WPC be measured and paid separately.

Supply only water proofing compound

M&L for Preparation of new surfaces (Plastered or un-plastered or rough cast) of walls and applying two coats of cement based paint white or tinted ,complete all as specified and directed.

M&L for Preparation of old surfaces of wall (Plastered or un-plastered) of walls and applying one coats of cement based paint white or tinted over a coat of alkali resitant primer complete all as specified and directed.

M&L for Preparation of new/old surfaces (Plastered or un-plastered) of walls and applying two coats of white lime wash, complete all as specified.

M&L for Preparation of new/old surfaces (Plastered or un-plastered) on ceiling and applying two coats of white lime wash, complete all as specified.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified.

M&L for preparation of old surfaces by complete removal of existing treatment and applying two coat of oil bound distemper over a coat of primer all as specified and directed.

M&L for preparation of previously treated /old painted wood and wood based surfaces of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of previously treated /old steel surface of any description not otherwise described over 10cm width or girth & applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of new wooden surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified & directed.

M&L for preparation of steel surfaces of any description not otherwise described over 10 cm width or girth & applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified & directed.

Supply and apply of rust remover cum passivator to remove rust from existing reinforcement with Product- Sika Rustoff 100 or equivalent and apply a epoxy based zinc rich rebar corrosion protection system with Product- Friazinc R or equivalent and finally mixing and applying two component Epoxy resin concrete Bonding coat with Product-Sikadur-32 LP or equivalent. on prepared RCC surfaces as in ceiling, chajja, slab, col beam etc. as per manufacture specification including preparation of surfaces by chipping and throughly cleaning of surfaces complete all as specified and directed.

M&L for applying water proofing treatment as following:- (a) A coat of bitumen primer @ 0.40 Kg/Sqm on prepared surface of plaster (b) Applying App based polymeric membrane minimum weight 3.50 Kg/Sqm and minimum 3mm thick reinforced with podyster non woven fabric/wt not less than 150 gm/Sqm and seating joints by torched application bitumen.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exc 1.5 sqm but n.exc. 4.00 sqm each complete all as specified & directed.

Taking down shutters of any description area exc 1.00 Sqm but n.exc 2.00 sqm each complete all as specified & directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supply & fixing in opening and making good disturbed surfaces of jambs by matching with existing treatment complete all as specified & directed.

S&F factory made solid panel PVC door shutters 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rail, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixing in the frame at site complete all as specified & directed.

S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, iron doors/gates chowkats;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified & directed.

S&F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers etc. sizes of members of shutter sas specified in SSR Part I, Section 8, Clause 8.24(a) complete all as specified and directed.

S&F 35mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; supplied and fitted to chowkats complete all as specified and directed.

S&F powder coated aluminum window & ventilator any type shutter with/without sash bar, aluminum section weighing not less then 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminum snap beading, screw etc complete all as specified & directed. Note : (i) Glass shall be measured and paid for saparately.

S&F 150mm long powder coated aluminium barrel tower bolt of extruded section complete all as specified & directed.

S&F 150mm long powder coated aluminium handles, cast type, anodised complete all as specified & directed.

S&F 100mm stainless steel butt hinges, medium weight fixed by welding or drilling to MS frames or wooden chowkhats complete all as specified & directed.

S&F 300mm powder coated aluminium, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified & directed.

S&F for stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apperture 1.40 mm fixed to door / window (steel/wooden) complete all as specified & directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc. 0.5 sqm in each pane complete all as specified & directed. (Note : The Glass panes will be fixed up to four storey building from external side.)

S&F 4mm thick figured glass ,pin head type and glazing with oil putty, pins spring clips etc in square n.exc 0.5 Sq m in each pane complete all as specified & directed. (Note : The Glass panes will be fixed up to four storey building from external side.)

S&F for floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring Overall length of cover plate 140 mm complete all as specified & directed.

Taking down and refixing the same shutter in any opening after reparing the shutters of any description exc 1 sq. m and n exc 2 sq. m each complete all as specified & directed.

S&F in repairs vitreous china squatting pan 'Orissa' pattern,size 580X440mm, white, with intergral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap 100mm out let diameter including jointing to CI pipe fixed in cement concrete type B-1 (1:2:4) including WPC and including connection to trap & to flushing pipe,anti syphonage pipe etc making good floor to match with adjoining area complete all as specified & directed.

S&F in repair vitreous China wash down water closet pan (pedestal pattern), white, including 'P' trape and connection with cistern, Plastic water closet seat cover, white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified & directed.

Taking down low level PVC flushing cistern carefully, cleaning and stacking aside complete all as specified & directed.

S&F PVC low level white flushing cistern, valveless syphonic action type 10 ltr capacity with inlet, ball valve, float and handle including PVC flush pipe bend and brackets of suitable size including making necessary connection to water supply pipeline complete all as specified & directed.

All per item 76 above but except flushing cistern complete all as specified and directed

S&F in repair Vitreous China wash basin, white, Oval shape, under countere type including coupling, waste pipe fix in granite top complete as specified.

S&F in repair Vitreous China urinals, Half stall type (back or corner wall type), white, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement; fixing brackets, flush pipe, grating and Union for discharge pipe and waste pipe complete all as specified & directed.

M&Lfor vitreous china wash basin flat back size 550x400 mm size white excluding taps waste chain and plug and porcelain stopper but including brackets and 32 mm dia waste fittings brass chromium plated with long screwed shanks and fly nuts, 32mm dia 600 mm long PVC waste pipe complete flange end bedded in red lead cement and other end fixed complete all as specified & directed.

S&F in repair tubular towel rail 20mm dia, brass chromium olated, D type, 60cm long between flanges complete complete all as specified & directed.

S&F in repair for Bib tap standard of PTMT any colour high pressure screwed for iron pipe of 15mm bore dia (Minimum weight 15mm-90gms) complete all as specified & directed.

S&F in repair angle/stop valve of PTMT any colour high pressure screwed for iron pipe and fixed for 15mm bore dia pipe (Minimum weight 15mm-90gms) complete all as specified & directed.

S&F in repair Pillar taps of PTMT swan neck type any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) complete all as specified & directed.

S&F in repair for swivel shower of PTMT any colour for fixing with 15mm bore dia pipe alongwith shower arm size 195mm long with bend of 45 degree with flange of PTMT any colour (Minimum weight 40gms) complete all as specified & directed.

S&F in repair for PVC connection 450mm long with 2 nos PTMT check nuts, suitable for 15mm dia complete all as specified & directed.

S&F Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including necessary fittings such as tank lid, nipple, socket etc complete all as specified & directed.

All as per item 88 above but 1000 ltr capacity.

S&F in repair CP grating 125mm dia, complete all as specified & directed.

S&F for 100mm dia Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified & directed.

Taking down and refixing of cast iron 100mm soil waste pipe on wall complete all as specified & directed.

Taking down and refixing of cast iron 75mm soil waste pipe on wall including taking down complete all as specified & directed.

M&L for providing lead joints to cast iron pipes and fittings in lieu of cement joint complete all as specified & directed.

S&F 110mm PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

All as per item 95 above but fixed to wall

S&F PVC (SWR) bends 110 mm bore any radius complete all as specified and directed.

All as per item 97 above but with acess door

S&F 110 mm bore PVC (SWR) branch piece, double (double 'Y') equal or unequal with door any radius all as specified and directed

S&F in 110mm bore PVC (SWR) vent cowl all as specified and directed.

S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, laid in trenches or in floors.

S&F 75mm PVC (SWR) pipes single socket in any length with rubber ring joints, fixed to wall complete all as specified & directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified & directed.

S&F in repair 75 mm bore PVC (SWR) bends with acess door any radius complete all as specified & directed.

S&F in repair 75 mm bore PVC (SWR) branch piece, double (double 'Y') equal or unequal with door any radius complete all as specified & directed.

Disconnecting existing tanks for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. and reconnecting and re-fixing in position. exc 500 liter up to 1000 liters complete all as specified & directed.

S&F in repair ball valves 25mm dia high pressure of PTMT with epoxy coated aluminium rod and high density polythene float plastic ball complete screwed for iron pipe and fixed complete all as specified & directed.

All as per item No 107 but 20mm bore dia

S&F in repair gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed for 20mm dia pipe (ISI Marked) complete all as specified & directed.

All as per item No 109 but 25mm bore dia

S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed for 25mm dia pipe (ISI Marked) complete all as specified & directed.

S&F gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed for 40mm dia pipe (ISI Marked) complete all as specified & directed.

S&F 25mm bore PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes complete all asspecified.

Taking up or down 15mm bore dia steel tubing and connection including cleaning complete all as specified & directed.

All as per item 114 above but 20mm bore dia

All as per item 114 above but 25 or 32mm bore dia

S&F galvanized steel tubing, 15mm bore, medium grade including all fittings and short pieces & fixed complete to walls and ceiling or laid in floors, complete all as specified & directed.

All as per item 117 above but 20mm bore dia

All as per item 117 above but 25mm bore dia

Refixing of galvanized steel tubing, 15mm bore dia after cleaning, including all fittings and short pieces, fixed complete to walls and ceiling or laid in floors, complete all as specified & directed.

All as per item 120 above but 20mm bore

All as per item 120 above but 25 or 32mm bore

M&L for 40mm thick brick tiles laid on screed bed jointed, grouted in CM 1:3 mixed with 5% crude oil by weight of cement including 15mm thick screed bed in CM 1:4 in pach work complete all as spd and directed.

All as per item 123 above but except bricks.

M&L for raking out joints/ pointing of cement mortar to brick work or brick tiles, laid flat, in floor, roofs & flush pointing of cement mortar (1:3) to bricks, laid flat or brick tiles in roof etc complete all as specified & directed.

M&L for Brickwork with subclass ‘B’ bricks, in CM 1:4 using old siee brick, straight or curved on plan to any radius in half brick thick walls complete all as specified & directed.

Excavation in trenches, not exc 1.5m wide and not exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, laying of cable and pipe line etc. not exc 10 sq. m on plan and not exc 1.5m in depth and getting out in any type of soil, complete all as specified & directed.

All as per item 127 but depth exc 1.50m but not exc 3.00m

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soil, complete all as specified

M & L for removing excavated soils beyond MOD land complete all as specified & directed.

M&L for Cleaning and maintenance of sewage line / system from first manholes upto the final drop out let into the septic tank or central sewage system in running/flowing order without blockage of any description, in any situation manually or mechanically as required including all required T&P sewage pump, sewage machine etc complete all as specified & directed.

Taking out sludge water semi solid or solid materials from manholes upto a depth 1.5mtr, removing and depositing into excavated pit of suitable size outside of MOD land (incl necessary excavation and earth work in any type of soil) allowing initial perculation of sludge water and finally burying the entire solid/semi solid material completely underground complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep including getting out in any type of soil complete all as specified & directed.

Filling under floor, spreading and levelling in layers n exc. 25 cm thick, well ramming including watering as required complete all as specified & directed.

M & L for hardcore of broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15cm thick, watered and remmed to a true surface, complete all as specified & directed.

M&L 75 mm out let dia CI floor trap with grating including jointing to waste pipe in run lead complete all as specified & directed.

M&L 150X150 mm Salt glazed stoneware gully traps, square or round mouthed type 'P' complete all as specified & directed.

M&L brick work in cement mortar (1:6) using sub class 'B' bricks, straight or curved on plan exc 6 mtr mean radius complete all as specified & directed.

S&F steel window side hung shuttering including box type hinges with steel handle and steel peg stay completed with glazing bars dovetailed or welded standard section complete all as specified & directed.

All as per item 139 above but without glazing bars.

S&F precast RCC 1:2:4 type B1 Gully trap cover of size 300x300mm x50mm thick set in CM 1:6 complete all as specified & directed.

S&F 25 mm dia powder coated mild steel drapery rods including two fixing mild steel full round or half round fixing nuts (bracket holders) threaded/unthreaded as required complete all as specified & directed.

S&F 25 mm dia powder coated mild steel drapery rod's side bulb as required complete all as specified & directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified & directed.

Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified & directed.

Treating the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified & directed.

M&L for cement concrete 1:3:6 type C-2 (40mm graded agg) incl packing under and haunching against sides of 150mm dia (bore dia) SGSW pipe after they are laid and tested complete all as specified. (Thickness of concrete bed 150mm) complete all as specified & directed.

M&L for Reinforced concrete pipe class NP2, 150 mm dia laid in trenches & jointed in cement mortar (1:2) with collars complete all as specified and directed.

M&L for Loose filling with broken stone or boulders aggregates of gauge 80 to 150 mm in soakage pits, soakage wells etc complete all as specified & directed.

M&L for Loose filling with broken stone or boulders aggregates of gauge 40 to 80 mm in soakage pits, soakage wells etc complete all as specified & directed.

Supply and fixed factory made pre-cast concrete blocks for kerb stone with solid block exc 10 cm in width type C-1 , 1:3:6 ( using 20 mm graded stone aggregate) set in CM 1:6 of any shape and size as approved, including necessary excation and earth work including returning filling in the erarth and removal of surplus earth from site if any, kerb stone shall be fixed in true line and level or in curves for edging of road side path including embedding PCC pre cast block in ground to any depths as required and tamping soil around PCC block complete all as specified & directed.

M&L for glossy finish machine pressed precast conctete interlocking paver block any shape and size and colour confirming to IS 15658-2006, of 60 mm thickness (M-35 Grade) as approved by GE, laid dry (over and including 25mm thick layer of sand) complete all as complete all as specified & directed.

M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to Fe 410 (Gde-E- 250) complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded stone aggregate as in Slabs supported on walls,beams and columns in floors, roofs, landings, alconies,canopies, deck slabs and in shelves and the like complete all as specified and directed.

S&F 10 -12mm thick Rubber sheet with fabric backing or insert and plain coloured or marbled topping, matt or glossy, laid in floors with approved adhesive complete all as specified and directed.

S&F stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste coupling and waste pipe, cast iron cantilever brackets, connecting union over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm complete all as spd and directed.

M&L for 40mm thick DPC on horizental or vertical surface in PCC 1:2:4 type Bo using 12.5mm graded stone agg incl all necessary form wk & mixing of WPC (WPC shall be measurd & paid separately) complete all as specified and directed.

S&F steel ventilator with top hung shutter including box type hinges with steel handle and steel peg stay complete with glazing bar and complete all as specified and directed .

S&F 1mm thic Mild steel, plain, black sheet in wall clading, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire complete all as specified and directed.

M&L for hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F Mild steel screw bolts dia 11 to 15mm (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed.

S&F 15mm dia Bib taps long body, fancy type, Chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S&F for 50mm bore High density polyethylene pipes rating 6 kgf/cm2 laid in trenches complete all as specified and directed.

S&F for 50mm High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc. complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light/fan socket or power) complete including fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc and removing the material from site including making good the disturbed surface to match with the existing all as specified and directed by Engineer-in-charge.

M&L for point wiring with 3 x1.5 sqmm (nominal area) FRLS PVC insulated unsheathed and copper conductor cable ( phase ,neutral and earth wire ) in existing concealed conduit /open PVC rigid conduits,earth wire connected to comman earth dolly with and including pressed steel sheet metal sunken box of suitable size for fixing switches/ sockets etc with cover plate 3 mm thick plastic laminated sheet for one light /fan /exhaust fan/ circulator fan/ bell /buzzer controlled by one way switch complete all as specified and directed :-

(a) One light/fan/Exhaust fan/bell point controlled by one switch.

(b) One 3 pin 5 Amps socket outlet point controlled by one way switch on independent board.

(c) One 3 pin 5 Amps socket outlet point controlled by one way switch on same board.

All as per item No. 175 here in before but with 2x2.5 Sqmm and 1x 2.5 sqmm cable for earth connection for one 3 pin socket outlet 15 amps independent board complete all as specified and directed

S&F switch piano flush button type 5 amps single pole one way complete all as specified and directed.

S&F switch piano flush button type 15 amps single pole one way complete all as specified and directed.

S&F of socket outlet multipurpose 2/3 pin 5 amps flush button type complete all as specified and directed.

S&F socket outlet multipurpose 2 in 1, 5 and 15 Amps complete all as specified and directed.

S&F in repair of surface mounting 20 watt LED tube light fitting of 4 ft length connected with 23/.0076 twin core PVC flexible cable complete all as specified and directed.

S&F Exhaust fan metallic type ventilating single phase 230/240V of 300mm sweep including cutting of holes in a round shape and including fixing the ventilating fan complete all as specified and directed.

Supply & fix of ceiling fans complete with accessories 230 V,1200 mm sweep complete all as specified and directed

S&F ceiling rose 3 phase/PVC/polycarbonate isolated body complete all as specified and directed.

S&F in repair of factory made epoxy polyester powder coated distribution board SP & N 8 way fabricated from minimum 1.6 mm thick CRCA sheet with metal double door (IP-43 protection ) fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, Neutral bar, standard DIN rail, eath bar and cable ties for cable management, top and bottom removable gland plates with knockouts and suitable for one DP MCB as incomer and 6 SP MCBs as outgoings complete all as specified and conforming to IS: 8623 alongwith cable end box for above DB all as specified and directed. NOTE (a) MCBs shall be measured and paid separately. (b) All cables terminating into MCBs shall be connected by using suitable copper lugs/thimbles/sleeves and its cost shall be deemed to be included under respective item of Sch.

S&F Building LED street light fitting 25 W Endura pearl new generation energy saving and environmental friendly long life LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP65 protection and impact resistance of IK 07,25W LED 5700K,luminaire along with a bracket of GI pipe suitable of size NBV having approx length of 1.5 M bent to shape and fixed to the wall with clamps,nut bolts etc of approsimate, size complete all as specified and directed.

S&F in repair of single pole MCB 6 to 32 Amps, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity complete conforming to IS 8828 of 1996 including taking down old MCB's complete all as specified and directed.

S&F of ceiling fan regulator step type for 1200/1400 mm sweep ceiling fan including connections complete all as specified and directed.

S&F in repair of double pole MCB 40 amp, 240 v, 50 Hz AC Made from moulded self-extinguishing thermostat plastic and suitable for ‘B’ curve, 10 KA breaking capacity, complete all as specified and directed.

S & F in replacement Lamp holder with insulated body with back plate suitable for batten fitting complete all as specified and directed.

S&F in replacement of 7 Watt LED vlamp 6500K, complete all as specified and directed.

Supply, laying, testing and commissioning of XLPE insulated armoured heavy duty electric cable with aluminum stranded copper conductor ,1100 volt grade cross sectional area 10 sqmm 2 core LT Cable complete all as specified directed.

M&L for HDPE double wall corrugated pipes conforming to IS-14930 Part-II with IP protection OF IP-67 having outer dia 50 mm and inner dia of 38 mm suitable for 16 sqmm LT cable of length 5.75 mtr with coupler 'O' ring for jointing & end caps of suitable size complete all as specified and directed.

Deduct Credit: for demolished/dismantled material of (-) Rs 17284.00 (Minus) as listed in Schedule 'A' Part II (Credit Schedule) Note: Tenderer's shall not quote against this item. The amount of Credit Schedule is tentative, however the same shall be considered to arrive at the contract sum

M/S HAJI BUILDERS

B. S BUILDERS