SPL REPAIRS TO STANDBY LT CABLE FOR TRANSFORMER TO ASR DG INSTALLATION AT INS UTKROSH AND OTHER SANCTIONED WORKS UNDER GE MINNIEBAY, PORT BLAIR

Amount

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in Hard/ dense soil complete all as specified and directed.

Excavation in soft loose soil not exceeding 1.5 mtr wide and n exc 1.5 mtr depth and getting out incl forming of bottom for laying cable all as specified and directed.

Returning, filling in using excavated soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed..

Removing surplus soils not exceeding 50 M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/lLoose soil complete all as specified and directed

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Hard / dense soil complete all as specified and directed

M&L for Plain Cement Concrete Type D2 1:4:8 using 40 mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

M&L for Mild steel TMT bars 6 mm to 8 mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing wit clips complete all as specified and directed.

S&F TMT bars 5 mm dia and over upto and including 10mm dia., cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips as in stirrups, spacers and binders complete all as specified and directed.

M&L for RCC M-30 (Designe Mix) using 20 mm graded stone aggregates as in footings / beams complete all as specified and directed.

M&L for RCC M-30 (Designe Mix) using 20 mm graded stone aggregates as in columns complete all as specified and directed.

M&L for RCC M-30 (Designe Mix) using 20 mm graded stone aggregates as in beams complete all as specified and directed.

Fair finished flat Form work to sides of concrete foundations rafts etc complete all as specified and directed.

Fair finished Square, rectangular or polygonal Form work to sides of pillars, posts, struts, columns and stanchions complete all as specified and directed

Fair finished flat Form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports etc complete all as specified and directed

M&L for precast cement concrete block masonry with solid blocks,Type C1 1:3:6 using 20mm graded stone aggregate exc 10 cm in width and setting in CM 1:6 complete all as specified and directed

S & F MS steel work in tubular trusses and tubular posts including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 complete all as specified and directed

S & F Aluminium flat work in hand rails, wind ties screwed as directed, including all necessary drilling, bolting or riveting etc., and similar work complete all as specified and directed.

Preparation of old painted steel surfaces of any description, not exceeding 10 cm width or girth, not otherwise described and applying a coat of Synthetic Enamel paint (Ordinary tint) complete all as specified and directed.

Preparation of New or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of redoxide complete all as specified and directed

S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering fixed with self tapping screws as specified and as per manufacturers instructions complete all as specified and directed

S&F prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in ridges fixed with self tapping screws as specified and as per manufacturers instructions complete all as specified and directed.

S&F aluminium anodised snap grid false ceiling of standard aluminium section such as wall angle of size 38mm x 25mm x2.4mm weighing 0.36KG/RM main/cross tees of size 36.5mm x25mm x1.4mm weighing 0.24 KG/RM, grid size n.exc. 610x610mm suspended with 4mm dia GI wire at interval n.exc. 600mm centre to centre for main & cross tees fixed to roof slab roof truss fixed with suitable size MS hook and fasting bolts etc including 'E' board classic 4mm thick oceanic sheet of size n.exc. 610x610mm size fixed in ceiling with clips to aluminium snap grid including two coats of oil bound distemper all as specified and directed.

M&L for hardcore of gauge not exceeding 63 mm of broken granite stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed

M&L for 100 mm thick Cement concrete type D 2, 1:4:8 using 40 mm graded stone aggregate in sub base of flooring/ hard standing complete all as specified and directed

M&L for 100mm thick PCC 1:2:4 type B1 using 20 mm graded stone aggregate in floorings including finishing the surface even and smooth without using extra cement.

M&L for Non skid ceramic coloured tiles 7-8mm thick exc0.18 sqm but n.exc 0.38 sqm area of each tiles, in floor / steps etc,set and jointed in neat cement sluryy and pointed in coloured cement to match as in floor over 20mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles 300x200x 7mm thick as in dado/skirting set and jointed in neat cement slury and pointed in coloured cement to match over 10mm thick backing Coat in CM 1:4.

M&L for 75 mm thick Cement concrete type C2, 1:3:6 using 40 mm graded stone aggregate in flooring/ plinth protection finishing the surface even and smooth withoug using extra cement.

M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement.

M&L for rendering 15mm thick in two coats ie. 10mm thick under coat in CM 1:6 and 5mm thick finishing coat in CM 1:4 using Water Proofing Compound all as per manufacturer instructions all as specified and as directed. Note :- Water Proofing Compound will be measured and paid separately.

Supply only Water Proofing Compound with ISI marked all as specified.

S&F Anodised Aluminium frames for Windows and Ventilators with one or more rebates incl jointing cleat for fixing etc and aluminium anodised skelton windows & ventilator shutter fixed with glass or gauge, side hund type without sash bars using standard aluminium section incl necessary jointing cleats, glazing clips, rubber packing anodised aluminium snap beadings screws, anodised aluminium fittings such as handles stainless steel adjustable friction stay hinges etc complete all as specified incl aluminium grills fixed to window frame aluminium anodised XPM of size 3.00x1.5mmx22 gauge fixed to aluminium frame all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make only for the cost of aluminium section. However unit rate quoted shall deemed to include cost of rubber beading, fittings such as handles, SS friction stay hinges and fixing of 5mm thick glass etc. (ii) Supply only 5mm thick sheet glass and aluminium XPM be measured and paid separately. (iii) Weight of aluminium handle & SS hinges shall not be accounted for payment purpose .

Supply only aluminium 'XPM' of size 3.00x1.5mm x 22 Gauge complete all as specified and directed.

Supply only 5mm plain ordinary glass complete all as specified and directed.

Supply only 5mm Figured glass complete all as specified and directed.

S&F 18 / 19 mm thick one side prelaminated Particle board, medium density, and fixed with screws to aluminium frame work complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm wooden grain printed PVC sheet, edges will be painted to match with printed sheet, reinforced with MS square tube & fixing in opening complete all as specified and directed.

S&F Factory Made Solid Panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS Tubes for top & bottom rails, MS frame shall be covered with heat moulded wooden grain printed PVC sheet and 5mm thick x 15mm wide PVC sheet beading used inside stiles & rails and decorative PVC beading of 10mmx10mm used instead of exposed portion of PVC sheet beading complete all as specified and directed

S&F Butt hinges 100 mm size, Aluminium anodised type C-21 complete all as specified and directed

S&F Aluminium anodised barrel tower bolts of extruded sections 150 mm size complete all as specified and directed

S & F 100 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F Vitreous China Squatting Pan"Orissa pattern" size 580 mmx440 mm white with integral foot rest etc. ( excluding cistern and flush pipe) including S or P Trap & Provision of concrete bedding and making good to floor all as specified & directed by Engineer-in-charge.

S&F PVC low level flushing cistern 10 litres capacity with inlet ball valve, float and handles including brackets all as specified & directed by Engineer-in-charge.

S&F Vitreous China Wash hand basin, white flat back size 550x400 mm including brackets(including Pillar Tap 15 mm bore Chromium plated cast copper alloy with capstan heads, 32 mm waste coupling brass chromium plated suitable for wash hand basins, with long screwed shanks and fly nuts & PVC waste pipe) all as specified & directed by Engineer-in-charge.

S&F Vitreous China Urinal, full stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed

S&F GI Tubes medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed of following size:-.

Bore of pipe 15 mm

Bore of pipe 20 mm

S&F Stop Valves Chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends complete all as specified and directed of the following size:-

Bore of pipe 15 mm

Bore of pipe 20 mm

S&F Bib Taps 15 mm bore cast copper alloy Chromium plated with crutch or butterfly handles, screwed down, screwed for iron pipes complete all as specified and directed.

S&F Brass Chromium Plated Shower Rose 125 mm size suitable for 15 mm bore pipes complete all as specified and directed.

S&F Grating round of 100mm size complete all as specified and directed.

S&F PVC flexible connections 15 mm dia 600 mm long with brass checknuts complete all as specified and directed .

S&F PVC waste Pipe of size 32 mm for WHB complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks 500 Ltr capacity (cylin-drical vertical with closed top) double layer including provision of lid and all other connection accessories and hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed

Preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion based premium quality matt finish exterior antifungal paint over a coat of primer all as per manufacturer's instructions and as directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in foundation,filling and mass concrete complete all as specified and directed.

M&L for precast RCC 1:1.5:3 type A1 using 20 mm graded stone aggregate set in CM 1:4 as in Lintels complete all as specified and directed

M&L for PCC 1:2:4 type B2 using 40mm graded stone aggregate as in wall complete all as specified and directed.

M&L for 12 mmthick plastering in CM 1: 4 and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for Precast RCC 1:1.5:3 type A1 using 20 mm graded stone aggregate set in CM 1:4 as in cover slabs complete all as specified and directed.

S&F 20mm dia MS rungs complete all as specified and directed .

M&L for PCC 1:4:8 type D-2 as in Concrete bed to drain 150mm bore pipes including packing under, and hunching against the sides of pipes after they are laid and tested;complete all as specified.

M&L for reinforced concrete pipe ,class NP3, 150 mm bore (internal dia) laid and jointed complete with collars all as specified

S&F for 100mm bore, Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors

S&F for 100mm bore, Cast iron soil, waste and vent pipes, cowls complete all as specified and directed

M&L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified

M&L for double layer bomboo matting complete all as specified and directed complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, incl forms, moulds, mitred/ stopped ends etc complete all as specified.

M&L for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded copper conductor drawn through and including non-matallic rigid PVC conduit , metal flush box of suitable size and conduit accessorries concealed in walls, roofs and floors etc including provision of 1.5 sqmm PVC insulated unsheathed cable with multi stranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified for the following :-

One Light point controlled by one way switch.

One ceiling / exhaust fan point controlled by one switch.

One three pin socket out let 5 amps on independent board complete.

One three pin socket out let 5 amps on same board complete.

All as per item No. 71 above but with 4 sqmm PVC copper conductor cable for one socket outlet of capacity 15/16 A controlled by one way switch of 15/16 A on independent board all as directed.

S&F Ceiling rose, 3 phase/PVC/ polycarbonate, isolated body all as directed.

S&F Switch piano, flush type single pole, one way 5 Amps all as directed.

M&L S/S combination 2 in 1, 15 Amps flush typeall as directed.

S&F Switch Socket Combination, 5/6A - 2/3 pin complete all as directed, Make Havells, Anchor, Legrand

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type.

S&F for sub main wiring in PVC casing caping with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 4x6 sq. mm + 2x6 sq. mm earth wire single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc or concealed in wall and connecting to common earth dolly all as specified and directed. Note : 6 runs of cable/earth conductor and one run of PVC Conduit shall be measured and paid as single unit.

S&F Energy efficient (5 Star rated) ceiling fan 1200 mm sweep single phase 240 volts AC with necessary fittings, down rod & canopy without fan regulator suitable for ceiling fan complete and connecting up including provision flexible PVC cable with stranded copper conductor of size 1.5 Sqmm from ceiling rose to connector of ceiling fan all as directed.

S & F wall mounted fan 400 mm sweep complete fixed on wall with nut bolts including provision of 3 core flexible PVC cable with stranded copper conductor of size 1.5 Sqmm from ceiling rose to connector of air circulator fan all as specified and directed.

S&F stepped Socket type fan Regulator flush type on the existing phenolic laminated sheet as required.

S&F Energy efficient recessed / Ceiling mounted LED luminari suitable for 2'x2' grid with profiled diffuser, electronic control driver 34 watts, AC 230 Volts 50 Hz complete all as specified and directed

S&F Decorative Ultra Slim linear LED lighting fixture with extruded Polycarbonate environmentel friendly energy effcient cap 10 W LED 6000K etc complete all as specified and directed.

S&F Security light of 25 watt, energy saving and environmental friendly long life LED security light made up of pressure die cast aluminium housing with acrylic cover as diffuser with IP-66 protection and impact resistance of iK07 all as specified and as directed.

S&F MCB SP 6-32 A, C seires 240/415 V, 50 Hz, 10 kA all as directed.

S&F MCB TPN 40 A, C seires 240/415 V, 50 Hz, 10 kA complete all as specified and directed

S&F MCB DB Double door, TPN, 4 ways,Sheet metal enclosure for 200 A bus bar with all accessories complete all as specified and directed

S&F SPN enclosure with a two pin and earth plug top alongwith single pole MCB 20 Amp complete all as specified and directed.

S&F for sub main wiring in PVC casing caping with PVC insulated, 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2x4 sq. mm + 1x4 sq. mm earth wire single core multistranded copper conductor PVC insulated cables as earth continuity conductor drawn through and including one run of rigid PVC conduit and conduit accessories fixed on wall/ceiling etc or concealed in wall and connecting to common earth dolly all as specified and directed. Note : 6 runs of cable/earth conductor and one run of PVC Conduit shall be measured and paid as single unit.

M&L for earthing complete with Galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mir deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanized earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type CI chamber. MS funnel, wire gauge. 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos. 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance n exc 50 mtr, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I. Note: (i) Cost of GI earth wire and GI protection pipe upto 7.5mtr length shall be deemed to be included in the rate quoted for this item (ii) The unit rate shall also includes for Wire mesh, funnel, excavation.returninng & filling. PCC chamber pit,RCC cover & test point (iii) PCC pit shall be provided at least 500mm away from the earth pit and not just on the earth pit. (iv) All accessories required for galvanised steel plate electrode required , as specified and as directed by Engineer in charge as per SSR Part-I of 2010.

Supply and laying in replacement GI tubing light grage for cable protection of size 80mm bore in trenches/duct/fixing to pole/wall or in similar position all as specified and directed

Suppy & laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 95 Sqmm 3.5 core, laid in duct / fixed on wall/trenches

Suppy & laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 185 Sqmm 3.5 core, laid in duct / fixed on wall/trenches complete all as specified and directed

Suppy & laying and testing in replacement of cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 240 Sqmm 3.5 core, laid in duct / fixed on wall/trenches complete all as specified and directed

Supply, laying in replacement of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 120 mm and inner dia 103 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as secified.

Supply, laying in replacement of Telerex DWC (double Wall corrugated) HDPE pipe ISI marked of outer dia of 90 mm and inner dia 76 mm polethylene including couplers, bends, cap etc., with smooth internal and profiled external surface for non pressure under ground cable complete all as secified.

bansal construction

Allied Trading Company

M/S KHUSHICONSTRUCTION