REPAIR REPLACEMENT OF UNSERVICEABLE WIRING AND ACCESSORIES UNSERVICEABLE DISTRIBUTION BOARDS AND ALLIED WORKS AT ZONE B PHASEII UNDER AGE EM GE I R D EAST BANGALORE

Amount

Taking down carefully U/S aluminium/ copper point wiring (light, fan, socket or power) complete with fittings such as switches, sockets, ceiling rose, light fittings etc, removing all material for reuse/ issued under sch of credit and making good the distrubed surface as the existing one complete all as directed.

Taking down unserviceable DBs including MCCBs/MCBs complete issued under sch of credit and making good the distrubed surface as the existing one, complete all as directed.

Taking down old sub main wiring of any type and size complete all as specified and directed

M &L for Point wiring complete with Multi stranded copper conductor size 1.5 sqmm PVC insulated, unsheathed,FRLS cable , 1100 volts grade conforming to IS 694 multistranded , drawn in rigid PVC type conduit concealed in walls / floors/ ceiling etc with and including metal flush boxes of suitable size and modular white plate with frame for mounting of fittings, modular type switches, regulator and also including 1.5 sqmm PVC insulated unsheathed copper cable green in colour as continuous earth continuity conductor and connecting to earth dolly,cutting chasis to the wall s/ floors/ ceiling and repairing with existing surface after work ,complete all as specified and directed.

One light/ fan/exhaust fan point controlled by one way switch.

One light point controlled by 02 two way switches .

One three pin socket outlet 6 amps socket on the same board with other switches .

One 3 pin socket point 5 Amps on the independent board.

One bell point controlled by one bell push .

All as per item No 4 here-in-before, but using copper conductor 2.5 sqmm PVC insulated unsheathed FRLS cable with copper conductor size 1.5 sqmmm PVC insulated unsheathed continuous earth continuity for 3 pin 15 amps soket outlet independently all as specified and as directed by engr-in-charge.

Supply & fix switch modular type single pole 1 way 6 Amp 230 volt complete as directed.

Supply & fix switch modular type single pole 2 way 6 Amp 230 volt complete as directed.

Supply & fix socket 6 Amps modular type, 230 volts grade all as directed.

Supply & fix switch modular type 1 way 16A, 1 module all as specified and directed.

Supply & fix Socket Modular type 6A/16A 2-3pin combined 2 module 230Volts grade all as directed.

Supply & fix Modular switch bell push 6 Amps one module all as specified and directed by Engr-in-Charge.

Supply & fix modular type fan regulator 120 W two module complete all as specified and directed by Engr-in-Charge .

Supply and fix bell music AC 230V single phase all as specififed and directed by Engr-in-Charge.

Supply & fix ceiling rose surface bakelite two to three terminal complete all as directed.

Supply & Fix angle holder polycarbonat/bakelite type with back plate complete all as specified and directed including one number LED lamp of 9 Watts.

Supply and replacement of LED type 4 feet tube light batten fitting surface mounted of 20 Watts extruded aluminium housing high lumen output complete all as specified and directed .

Supply and replacement LED mirror light fitting surface mounted of capacity of 10W with plastic body and accessories complete all as specified. including connecting to ceiling rose with twin copper conductor of size 0/0.24 complete all as specified and directed .

Supply and replacement of LED type surface mounted decorative bulk head fitting edge lit of 10Watts complete including connecting to ceiling rose with twin copper conductor of size 0/0.24 all as specified and directed.

M&L painting of ceiling fan along with down rod and blades using spray gun with existing colour at the site including dismantling the fan from the hook and after cleaning the fan after complete the connection all as specified and as directed by Engr in charge.

Dismantling all components of ceiling fan 1200mm sweep, cutting and removing burnt out copper wining from the rotor assy and rewinding with super enamelled copper winding wire of suitable gauge and turns with necessary insulation materials , varnishing, reassembling , greasing to bearing , replacing bushes, replacment of capacitor and complete testing all as directed. Note:- (a) The spares like ball bearing, capacitor and GM bush required for repair the ceiling fan will be measured and paid separately under respective item. (b) Expendable stores like cotton waste /cleaning materials, grease, lubricants, machine screws, safety split pin, bolts, nuts and transportation to and fro from site to work place are deemed to be included in rate quoted.

All as per item No 20 herein before but for 1400mm sweep ceiling fan complete

All as per item No 20 herein before but for 300mm sweep exhaust fan complete

All as per item No 20 herein before but for 450mm sweep exhaust fan complete

Supply and replace worn out fan bearings of the existing size of superior quality complete all as specified and directed

Supply and replace capacitor 2.5mfd suitable for 1200mm sweep ceiling fan complete all as specified and directed

Supply and replace capacitor 4.0mfd suitable for exhaust fan complete all as specified and directed

Supply and replace rubber reel of superior quality along with gun metal frame and split pin complete all as specified

Supply and fix exhaust fan louvers on outside of the external wall suitable for 300 / 380mm sweep(as requiment at site ) for G+5 buildings complete all as specified and as directed by Engr in charge . Note : No any additional cost to be provided to the contractor for the fixing .The rates are included all the T & P for fixing.

Supply and fix exhaust fan louvers on outside of the external wall suitable for 450mm sweep for G+5 buildings complete all as specified and as directed . Note : No any additional cost to be provided to the contractor for the fixing .The rates are included all the T & P for fixing.

M & L for submain wiring of 2 run 4 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surface with accessories concealed in wall/roof including one run of 2.5 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge

M & L for submain wiring of 2 run 6 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surfaceaccessories concealed in wall/roof including one run of 4.0 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge

M & L for submain wiring of 4 run 10 Sqmm size PVC insulated unsheathed multistranded copper conductor 1100 Volts FRLS grade drawn through and including suitable size of PVC conduit /existing conduit /surfaceaccessories concealed in wall/roof including two run of 6.0 Sqmm PVC insulated multistranded copper wire for earth , ISI marked and connecting up complete including removing old unserviceable cables all as specified and directed by Engr-in-Charge

Supply and fix in replacement of MCB DB SPN 4 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed

Supply and fix in replacement of MCB DB SPN 8 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed .

Supply and fix in replacement of MCB DB SPN 12 way DB double door type single phase 230 Volts complete including dismantling the old one all as specified and directed .

Supply and fix in replacement of MCB SPN 6-32 Amps C Curve type 230 Volts single phase all as specified complete including dismantling the old one.

All as per above item No -37 but capacity of MCB SPN (40-63) Amps

Supply and fix in replacement of MCB SP (6-32) Amps C Curve 230 Volts single phase all as specified complete including dismantling the old one.

Supply and fix in replacement of MCB TP (25- 63) Amps C Curve type 415 Volts three phase all as specified complete including dismantling the old one .

Supply and fix in replacement of MCB TPN (16-32) Amps C Curve 415 Volts three phase all as specified complete including dismantling the old one .

Supply and fix in replacement of MCB TPN (40-100) Amps C Curve 415 Volts three phase all as specified complete including dismantling the old one .

Suply and fixing in replacement of Hylum sheet with not less than 3mm thick of size 4" x 4"

Suply and fixing in replacement of Hylum sheet with not less than 3mm thick of size 4" x 6"

Suply and fixing in replacement of Boxes junctions, plastic, round, four terminals fixing in wall /ceiling as required at site /directed by Engr in charge.

Suply and fixing in replacement of switch piano flush type 6 amps one way type including taking down old one.

Suply and fixing in replacement of switch piano flush type 16 amps two way type including taking down old one .

Suply and fixing in replacement of socket 5 pin flush type 6 amps including taking down old one.

Suply and fixing in repplacementof fan regulator flush type switch type 100/120 watt including taking down old one.

Suply and fixing in replacement of fan regulator flush type socket type 100/120 watt including taking down old one.

Suply and fixing in replacement of Switch socket combination 2 in 1, 6A flush type including taking down old one.

Suply and fixing in replacement of Switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal type including taking down old one.

M & L for repair to existing broken switch board by taking out the old exisiting switches, sockets, regulators flush type and refixing the same after replacement of hylum sheet of required size under mentioned with complete electric connections and making screws and made functional with all electric connections as per speciifed and directed by Engr-in- charge. Note: Switches , sockets, regulators, hylum sheet, if required at site then it will be measured and paid separately.

Supply and fix in replacement of single phase Tamper proof electronic energy meter with LCD display 240Volts 2 wire system , 10-60Amps 50 Hz having accuracy class 1.00 as per IS-13779 complete with all standard anto tamper features including logging and display of tamper data complete including sealing properly with lead seals and wires and taking out the old unserviceable meter on complaint basis and deposit the same to AGE E/M Store Yard complete all as specified and directed by Engineer-in-Charge Make : L&T/Secure/AMTL

supply only insulation tape roll (as per sample)

M & L for Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground( earth pit not less than 2.25metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected as required 4.0 MM GI wire up to means of GI bolts, nuts , check nuts and washers and connected to building panel/DB all as shown in electrical plate No. 3 of SSR Part I and all as specified including testing on completion, taking down old unserviceable earthing complete all as specified and directed by Engr-in-Charge.

M & L for Earthing complete with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm buried directly in ground( earth pit not less than 2.25metres deep below the normal ground level) with top edge of the plate not less than 1.5m below normal GL connected as required 32 x 6mm upto 7.5Mtr GI strip up to means of GI bolts, nuts , check nuts and washers and connected to building panel/DB all as shown in electrical plate No. 3 of SSR Part I and all as specified including testing on completion, taking down old unserviceable earthing complete all as specified and directed by Engr-in-Charge.

S & F in replacment of LED driver suitable for LED street light fitting of capacity upto 70 Watts of existing make complete including taking down the old u/s fitting from pole / bldgs. Note : All T & P will provided by the contractor and No any extra cost will provided by the Dept.

S & F in replacement of LED driver suitable for LED street light of capacity upto 70 to 150Watts of existing make complete including taking down the old u/s fitting from pole / bldgs. Note : All T & P will provided by the contractor and No any extra cost will provided by the Dept .

S & F in repairs ball cock complete with epoxy coated aluminium rod and HDPE ball size 20 mm dia complete. Make : Prayag

S & F in repairs ball cock complete with epoxy coated aluminium rod and HDPE ball size 25 mm dia complete. Make : Prayag

M & L for servicing of 2 pole structure including greasing of 03 Nos GOD, replacemet of all jumpers with proper lugs/thimble, painting the structure and channels , replacement of wornout nuts bolts, replacement of blown fuses , trimming of tree branches including painting to the structure with aluminium paint over a coat of red oxide primer complete all as specified and as directed. Note: 1. Proper shut down should be taken in advance. 2. All Safety precautions should be taken by the tenderer

Materia & labour for cleaning of TPN DB box in each building by blower and checking the all incommer/outgoing MCBs/TPNs etc and tight the all ecectric loose connections and fixing of copper lugs through existing MCBs and after painting the complete the TPN DB Box as directed by Engr in charge

Fixing only LED tube light fitting of any rating /size fixing on wall / ceiling including all connection work including taking down all as directed and specified by Engr in charge. Note : LED tube light fitting will be issued under from store as a Schdule 'B'

M & L for taking out the unserviceable heating element of capacity 1.5 KW /2.0 KW (as requirment at site) of any make and supply and replace new heating element of capacity 1.5 KW/ 2.0 KW all as specified and directed by Engr-in-charge. Make - Roxy/ Power pack or equivalent

S & F thermostat switch suitable for fitting to geyser upto 50 ltrs capacity . Make : Girish/Roxy/Klick.

M & L PVC connecting pipe with brass union fitted at both and suitable for connection to 15mm GI pipe length of PVC connection 450 mm long for hot water including 01 No PVC washer on both lends.

All as per item No. 66 above but for cold water supply pipe.

M & L for providing PVC flexible copper cable 3 core 40/ 0.0076 for geyser cord. Make - Havells/polycab

S&F plug top 3 pin 15 Amp, Make - Anchor/ HPL

S & F indicating lamp green and red in colour of geysers.

Repair of Geyser assembly complete with brazing of brass tube stud, nut bolts and copper tank for a length not exc. 5.0 cm in each geyser.

S & F in replacement of inner copper tank for 25 ltrs geysers complete all as directed by Engr-in-charge

S & F in replacement of sheet metal enclosures with socket plug top and MCB SP 20Amps- 01 No ( Industrial socket) single phase 240V, 50 Hz complete all as specified and directed for Air conditioning point

Painting of LT outdoor type feeder pillar box of size not more than 1.50 x 1.25 x 0.75m with two coats of enamelled paint over a coat of red oxide primer including repair to the hinges and locking system , cleaning inside the panel, cleaning the vegetation around the foundation upto 1.0 mtr around complete all as specified and as directed.

Note : Above work / Item will be operated / execauted on as per planning / break down and user requirment basis,so contractor will depute their man power as per requirment basis as directed by JE/Engr in Charge on telephoncally . No extra cost will provided to the contractor.

GS TRADERS

RAHUL ENTERPRISES

NUTHANA ENTERPRISES

Vishwas Enterprises

HEERA CONSTRUCTION CO.

SAI CONSTRUCTIONS

GURU ENTERPRISES

Power and Telecom Systems