Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.5 CrAccepted-AOC ASSAM CHANDMARI GUWAHATI 3 | ₹3.5 Cr | L1 | Accepted-AOC proper |
| 2 | L1₹3.5 CrRejected-AOC GOPINATH NAGAR HOUSE NO 6A GUWAHATI P O GOPINATH NAGAR P S FATASIL AMBARI KAMRUP 781016 | KAMRUP METRO | ASSAM | 781016 | ₹3.5 Cr | L1 | Rejected-AOC Not Qualified for AOC |
| 3 | L1₹3.5 CrRejected-AOC WARD NO 3 RAMNAGAR P O P S DHEMAJI | DHEMAJI | ASSAM | 787026 | ₹3.5 Cr | L1 | Rejected-AOC Not Qualified for AOC |
| 4 | Not Admitted-Fee/PreQual/Technical | - | - | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹3.9 Cr
EMD Value
₹7.9 L
Closing Date
22 Aug 2022, 2:00 pmClosed
Chief Engineer Water Resources Department
O/O Chief Engineer Water Resources Department, Basistha, Guwahati 29
Construction of Embankment from Bi-inghoi area to Chomkan area to near L/B of river Kollonga in West Karbi Anglong district.
2022_DoWR_25942_2
DIPHU/2021-22/SOPD ODS/I
Open Tender
Civil Works
Works
180 days
DIPHU
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹7.9 L
Yes
10 Mar 2023
11 Aug 2022
22 Aug 2022
11 Aug 2022
22 Aug 2022
12 Aug 2022
Amount
Construction of Embankment with Material Obtained from Borrow Pits Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto pg q p 1000 m (1) Private Land
Turfing with Sods Furnishing and laying of the live sods of perennial turf forming grass on embankment slope, verges or other locations shown on the drawing or as directed by the Engineer including preparation of ground, fetching of sods and watering
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 A) With Crushed Stone II) P.C.C. grade M 20 (i) Nominal mix (1:2:4)
Plain/reinforced cement concrete in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 ans 1204 A) With Crushed Stone (IV) RCC Grade M 25 (i) for height upto 5m.
Supplying, fitting and placing TMT (Fe-500 D) reinforcement bar (From Primary Producer: TATA/SAIL/Esser Steel/ Jindal steel/Shyam steel/RINL) in substructrue complete as per drawings and technical specification Clauses 1002 1005 1010 & 1202
Providing and laying flooring laid over cement concrete bedding complete as per drawing and technical specification Clause 1303 III) Brick on edge laid in cement mortar (1:3)
(FORM WORK) Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. (Rate = SoR rate + 17% Cost index + 1% for Labour cess)
Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. V) Marshy soil
Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301
Bored cast-in-situ M35 grade R.C.C. pile excluding reinforcement complete as per drawing and technical specifications and removal of excavated earth with all lifts and lead upto 1000 m. including providing plasticiser (Masterplast PL-1/SPL-2 or equivalent), air entraining and water reducing plasticiser ( asterplast PAE or equivalent) and accelerating plasticiser (Masterplast ACPL or equivalent) conforming to IS-9103-1999 (Pile diameter-750 mm) (Qnty. 53Nos. x 10m. = 530 RM.)
Fabrication and installation of shutter, guide and bottom channel M.S.plate, 6 mm for.shutter skin
M.S.channel,150 x 75mm for stiffener
‘J’ type rubber seal, 125mm size
‘J’ type rubber seal corner, 125mm
M.S.Flat(50x6)mm for fixing Rubber seal
M.S.plate, 10mm for.shaft & counter wt. bracket
Nuts & bolts (assorted size)
M.S. washer (assorted size)
M.S.electrode,8 SWG
Filled D.A. gas
Filled Oxygen gas
Red Oxide primer
Antisol red oxide paint
Turpentine oil
Painting brush,3” size
Wire brush
C.I.rollers with centre hole 20mm including suitable collar as directed including fine finishing of size,100 x 150 mm
F shapped roller bracket made of 10mm thick plate of size 75 x 200mm with hole as directed to accommodate the above rollars
Roller pin of length 150mm 7dia 16mm
M.S.channel,200 x 75mm for Guide
M.S.channel,200 x 75mm for Bottom
M.S.electrode,8 SWG
Filled D.A. gas
Filled Oxygen gas
M.S.plate, 10 mm for base support
M.S. angle,(50x50)mm for anchoring
Guide channel separator stud
Red Oxide primer
Antisol red oxide paint
Turpentine oil
Painting brush,3” size
Wire brush
H.S. Diesel
Installation of Lifting Device including fiftting & fixing of operating system
Haren Mahanta
Sri Subhasish Das
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .