CONSTRUCTION OF BSO FURNITURE REPAIR YARD AT CHIMNEY HILLS, BANGALORE

Amount

GENERALSUMMARY Note : Schedule ‘A’ Part I to XI are prepriced by MES under Ser No. 2 to 12.00. Bidders shall insert their lumpsum amount in the Green coloured field under Col-6 only.

Lumpsum price worked out by the contractor for “Building Work” as listed in Schedule ‘A’ Part-I.

Lumpsum price worked out by the contractor for “Internal Electrification” as listed in Schedule ‘A’ Part–II

Lumpsum price worked out by the contractor for “INTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part–III

Lumpsum price worked out by the contractor for “Garbage Bin” as listed in Schedule ‘A’ Part–IV

Lumpsum price worked out by the contractor for “SITE CLEARANCE ” as listed in Schedule ‘A’ Part–V

Lumpsum price worked out by the contractor for “FOOT PATH” as listed in Schedule ‘A’ Part–VI

Lumpsum price worked out by the contractor for “ Sewage Disposal” as listed in Schedule ‘A’ Part–VII

Lumpsum price worked out by the contractor for “Area Drianage” as listed in Schedule ‘A’ Part–VIII

Lumpsum price worked out by the contractor for “BARBED WIRE FENCING ” as listed in Schedule ‘A’ Part–IX

Lumpsum price worked out by the contractor for “EXTERNAL WATER SUPPLY” as listed in Schedule ‘A’ Part–X

Lumpsum price worked out by the contractor for “EXTERNAL ELECTRIFICATION” as listed in Schedule ‘A’ Part–XI

SCHEDULE `A' PART - XII Miscellaneous items is not prepriced by MES and prepriced rates indicates 0.0 under column 5 signified this fact only. Bidder shall insert their rates in Green filed under Col-6.

M&L for sub main wiring complte with 2 runs of 4 Sqmm PVC insulated and unsheathed cable with multistranded copper conductor confirming to IS-649, 1100 volts grade and drawn through and including PVC non metallic rigid conduits and conduit accessories concealed / run on surface of wall/floors/ ceiling etc and connecting terminal ends including 1 run of 4 Sqmm of PVC insulated unsheathed copper conductor cable green colour as continuous earth continuity conductor and connecting to earth dolly including removing unserviceable sub main wiring complete all as directed and specified.

Supply and lay brunt bricks class 'B' of standard size in trenches for protection of UG cable.

Labour for riddled earth done through by riddle of excavated soil and spread the same as 23 cm layer on below and upper part of the cable as cable cushioning to UG cable all as per clause 19.75 of SSR part -I

Supply and fix LED street light 60 watt made up of pressure die cast housing with toughned glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 Make:- Havells Cat Part No ENDURAPEARLPLUSSL60WLED757SASYTOPC or equivalent in crompto/ Phillips

Supply and erection of steel tubular swaged pole complete with cast iron base plate, finial taper plug, bolts, nuts and screws as specified type 410-SP-31, 9 mtrs long, including necessary excavation and earth work, in loose/soft/hard soil of size 600 x 600 x 150mm , PCC 1:3:6 type C-2 in foundation, PCC 1:2:4 type B-1 in plinth block/ coping disposal of surplus soil upto 50m .painting inside with black bitumen paint and out side with two coats of aluminum paint over one coat of red oxide primer and numbering of poles and black & white stripping upto 1.5m height, 300m wide complete all as specified and directed.

S & F MCB SPN 63 Amps10 KA 240V 50HZ,'C' Curve ,ISI Marked (for taking connection from existing LT panel).

M & L for earthing with galvanised iron earth plate electrode 600mm x600mmx 6mm thick burried directly in ground (Earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 metres below normal ground level, connected to galvanised iron wire of 4 mm dia connected to earth plate electrode by means of bolts,nuts,check nuts and washers,earth wire protected with and including 15 mm bore medium grade GI pipe all as shown in electrical plate no 3 of MES schedule part-1, with and including PCC 1:3:6 type C1 pit with cover of RCC 1:2:4 type B1, reinforced with welded steel wire fabric not less than 4 kg per sqmtr with handle and angle iron frame, watering arrangement with 20 mm bore GI medium grade pipe, GI funnel with wiremesh, filling with mixture of common salt and charcoal, necessary excavation, refilling, removing away soil and earth work in any type of soil, testing and commissioning complete all as specified and directed.

Supply, hanging and connecting up energy efficient, five star rated ceiling fan of size 1200mm sweep complete with stepped type electronic regulator and down rod including provision of flexible copper cable 3 core of size 0.5 sqmm from ceiling rose to fan, including writing MES No 2cm height with synthetic enamel black paint complete all as specified and as directed Make: HAVELLS Rated 5 Star type : ES 50 Premium 5/ Orient Model - Smart saver 50/Crompton or equivalent of makes as listed here-in-after.

Supply and fix and connecting up Heavy duty Exhaust fan of size 300mm sweep 1400 RPM complete, with cable 3 core of size 0.5 sqmm from ceiling rose to fan, provision of 3mm thick bakelite sheet cover including writing MES No 2cm height with synthetic enamel black paint all as specified.Make shall be of Havells Turbo Force /Crompton/Orient heavy duty or equivalent of makes as listed here-in-after.

Supply and fix regal batten T8 1x22 watt complete wilh all accessories prewired including crystal glass LED tubelight 20W (double side connection) complete all as specified and directed. (Make:-Havells model No. REGAL BATTENT8UPTO 1X22WSSBSWH for frame and CRYSTAL1213TBDSTC 20W LED 865SGLASS for tube or eqvt of makes as listed here-in-after

Supply and fix surface and wall mounted LED batten with aluminium housing & integrated electronic driver of 10Watt (2ft) complete all as specified and directed. Make :- Havells model No. LUMILINEPLUSBS10WLED 865SPCSS or eqvt of makes as listed here-in- after

Supply and fix LED Bldg security light fittings, with pressure die cast LM6 aluminium housing and has lenses specially designed for street lighting with a system wattage of 20 watt, it has an electronic driver compliance to IEC safety standards with a voltage variation range of 12-270 V including provision of necessary brackets made of GI tubing of suitable dia with GI clamps, nuts and bolts etc for fixing of the fitting complete all as specified. Make : Philips Cat No BRP022 LED 20 CW MR S1 PSU GR or equivalent of makes as listed here-in-after.

Supply and fix LED surface mounted downlight with white powder coated polycarbonate decorative housing and pressure die-cast heatsink having high efficiency with heavy duty driver having THD < 10% of 10W capacity complete all as specified and directed. Make: Havells cat part No. INTEGRANEO SURFACEDLS 10W LED OS or eqvt as specified in the list of manufacturers here-in-after.)

Gnani Builders