REPAIR TO ROAD SIDE FURNITURE, COMPOUND WALL AND OTHER B/R REPAIRS WORKS UNDER ZONE-I AREA AT JAIPUR MIL STN

Amount

Cleaning and preparing the old painted road surface for road making with reflective thermoplastic white road marking paint confirming to BIS 3262 laid by road marking machine in a layer of CRYSTAILEX using 5 kg material per square metre by incorporating the white glass beads for reflectivity in 100mm width all as directed.

M&L for preparation of old concrete surfaces of any description over 10cm girth or width, not otherwise described and applying one coat of synthetic enamel paint complete all as specified

All as per item No 2 above but two coats of synthetic enamel paint.

Taking down cement plaster or cement lime plaster on brick / stone surfaces of wall or ceiling including raking outs joints, hacking for key scrubbing down with water etc

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles.

M&L brick work with old size sub-class ‘B’ bricks, straight or curved on plan exc 6.00 metre mean radius, built in cement mortar 1:6 for raising of height of drain, manhole / wall complete all as specified.

All as per item No 6 herein before but except bricks

M & L rendering 15mm thick on Brick masonary surfaces or surface other than fair faces of brick work on wall in CM 1:4 finished even and smooth without using extra cement.

M & L for preparation of new plastered wall surfaces and applying two coats of cement base paint on wall/RCC Jallies

M&L for two coat of weather proof exterior emulsion paint (Weather coat smooth) over a coat of priming (Seal-o-Prime) on new plastered surface complete all as specified and directed.

M & L for preparation of old surface of walls and applying two coat of cement paint of any tint all as directed.

M&L for complete removal of existing treatment of old external plastered surface of walls and applying priming (Seal-o-Prime) on plastered surface and two coat of weather proof exterior emulsion paint (Weather coat smooth) complete all as specified and directed.

M&L preparation of old steel surface and applying one coat of synthetic enamel paint all as specified

M&L for prearation of new steel surface and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified

M&L for writing letters or figures (Block , Roman, Italic or Indain) not exc 30 cm high marking paint white or golden yellow

All as per Item no. 14 above but writing stops, commas, short lines, dashes, hyphens, brackets, etc.

Demolition of cement concrete in ground floors and pavings not exc 15cm thickness (below or above ground level)

M & L plain Cement Concrete 1:4:8 type D-2 (40mm graded aggregate) in sub base of floors

M & L 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded aggregate) as plinth protection finishing even and smooth without using extra cement

M & L 40 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate)

Demolition stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in cement mortar

M & L for 25 mm thick sand cushion for laying of Paver block complete all as specified and directed

M & L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, with grey cement laid over sand cushion layer complete all as specified and directed

All as per item No 22 above but except tiles

M & L for 20mm thick screed bed in CM 1:6 for laying of chequered cement concrete tiles complete all as specified and directed

M&L rubber moulded chequered cement concrete tiles 20cm x 20cm x 20mm thick , set , jointed and pointed in neat cement slurry in floors with grey cement and pigment over screed bed complete all as specified and directed

All as per item No 25 above but except tiles

M & L precast PCC blocks or slabs 150 mm thick (1:2:4) mix type B-1 using 20 mm graded aggregated with plain or interlocking joints, Kerb stone on road side etc as directed complete in walls setting in CM (1:6).

M&L for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coat of synthetic enamel paint over a coat of primer complete all as specified

Demolation of precast RCC jallies including raming of any description any in any position set in cement mortar complete all as specified.

M&L providing precast cement concrete (1:2:4) louvers and jallies 25mm thick (measured solid) including all mouldings but excluding frame & set in CM 1:4

M&L precast reinforced cement concrete slab type B1, 1:2:4 ( 20mm graded aggregate ) as in landing, drain cover slab ( for manholes etc ) , chajjas , drain cover and shelves and similar articles with plain faces . (Reinforcement shall be measured & paid separatel.)

M&L plain cement concrete type B1 1:2:4 ( 20mm graded aggregate) as in lintels, cills steps, seismic and other similar bands , copings, kneelers, apex stone bed plates , kerb ,water troughs and like including weathering, slightly rounded or chamfered angles and throating as directed.

Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 33 above but 6mm to 8mm dia

M&L for granite (of any type), 16mm to 18mm work (table rubbed and polished) in steps, jamps, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite.

M&L for Dholpur stone 16 to 18 mm cladding gang saw cut with macnine cut edges, uniform colour of each stone size exceeding 0.25 sqm area and not exceeding 0.5 sqm fixed with and including one mumber SS clamps (grade-202) of flat 30mm X 2mm, 150mm long made to shape in each slab, making V groove at top and bottom of stone and drilling hole for hold fasterner, polishing,rubbing & including silicon treatment.

M & L machine cut kota stone slab flooring 20-25mm thick,size of kota stone 450x450 mm over and including cement screed bed 20mm thick in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

S&F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete

Dismantling plain or corrugated steel / FRP sheeting any gauge, thickness including nainital or similar pattern roof /wall covering

Dismantling wrought iron or mild steel work of any description nototherwise provided for

S & F steel work in tubular/ square/ rectangular trusses incl special shaped washer etc, complete using ERW orinduction butt welded tubes conforiming toIS 1161-1979 graded St-240

M&L pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified

S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L- type or J- type or cranked hook bolts

Dismantling galvanised chain link fencing of any description fixed to any type of fencing posts

S&F rolled mild steel work as in Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the lenght directed) and similar work conforming to Fe-290 GdeE-165.

S&F mild steel work such as angle iron in posts & struts in fencing including cutting tops to shape hand rail straight portion , drilled and contersunk for balusters , nosing to steps, struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc flat iron fillets ( for securing chain link fencing ) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165

Fixing only mild steel galvanized chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts etc. including provision of binding wire. Note :- Supply only chain link fencing shall be measured and paid for separately.

Supply only mild steel galvanized chain link fencing 4mm dia of mesh wire, mesh size 100x100mm including line wires complete all as specified and as directed.

S&F as in repair galvanized 2 strand, steel barbed wire 2.24mm dia, barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc as directed.

M & L for Restraining resecuring including making good of existing barbed wire, staples etc all as directed.

S&F in repair mild steel round bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for chain link fening ( in new or old )

S&F in repair cat eyes 125X125X25mm etc complete all as specified & directed. Make: Cat eyes make of Dark eye or equivalent as approved by GE

S&F in repairs standard quality solar stud aluminium alloy of size 125mmx125mmx25mm (shank 50mm) with storage battery, Ni-Mh (1200mAH) and 3 Nos LED each side etc complete all as specified & directed. Make: Solar stud of make Dark eye or equivalent as approved by GE

S&F in repairs delineator made of MS pipe 7.5cm dia and 90cm long with four bands of reflective tape HIP grade of colour red, yellow (02 Nos each) of size 5cmX22.5cm with two coat of enamel paint over one coat primer including providing jail of suitable size etc complete all as specified & directed. Make: Delineater of make Dark eye or equivalent as approved by GE

Schedule of Credit

S.R.Enterprises

UNIVERSAL INFRAPROJECT PVT LTD

J.J.ENGINEERING

M/S JALANDRA CONSTRUCTIONS

JAGDAMBA CONSTRUCTION COMPANY

M/s KUNTAL ASSOCIATES

ABHI CONSTRUCTIONS

RAMJI LAL & SONS