CA No CWE/PAT/T-12/2021-22 SPECIAL REPAIR TO BLOCK NO P 21 (12 QTRS) AT NEW JAT COLONY OF ASLT ENGR REGT UNDER GE SOUTH PATIALA

Amount

Schedule 'A'Section-I (Building Works)

Total amount of Sch 'A' Sec I (Building Works)

Schedule 'A'Section-II (INTERNAL ELECTRIFICATION WORKS)

Total amount of Sch 'A' Sec II (Internal Electrification Works)

Schedule 'A'Section-III (Misc Items of Works) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only.

Preparation of surfaces and applying 02 coats of interior emulsion paint (light shade) @ 10 sq.m/litre/2 coats to wall surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of interior emulsion paint (white shade) @ 10 sq.m/litre/2 coats to ceiling surfaces over & including a coat of interior wall primer @ 10 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using following brands of emulsion and primer complete all as specified and directed.

Preparation of surfaces and applying 02 coats of exterior emulsion paint (light shade) @ 5 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including a coat of exterior wall primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion complete all as specified and directed.

S&F factory made flush shutters 35mm thick, BWP confirming to IS 2202, solid core construction, with block board core and plywood face panels, commercial type on both sides including supply and fixing following items : (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 4 nos. per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos. per leaf (d) Stainless Steel (304 Grade) Finished Sliding Bolt 300 mm - 1 no. per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 nos. per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including S&F of stainless steel 304 Grade (natural finish) wire cloth (wire dia. 0.20 to 0.22mm) and the supply and fixing following items: (a) Stainless Steel (304 Grade) Finished Butt Hinges 150mm with stainless steel screws - 3 nos per leaf (b) Stainless Steel (304 Grade) Finished Square Tower Bolt 200mm long - 2 nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf

S&F powder coated 50 microns extruded aluminium glazing/ doors & shutters made out of section 101.60 x 44.45 x 1.75 mm for chowkats or frame & shutters made of size 44.45 x 44.45 x 1.29mm for side rails and middle rail, 114.3 X 44.45 X 1.29mm for top rails and bottom rails and including 12mm thick High Density Fibre Board pre-laminated on both sides (water proof) below & above middle/lock rail and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beads 20mm size with and including required nos of pivots / hinges and brass mortice lock (four levers) and two nos of key complete all as specified and directed including supply and fixing the following items: (a) Powder Coated Aluminium butt hinges 100mm - 3 nos per leaf. (b) Powder Coated Aluminium Tower Bolt 200mm long - 2 nos per leaf (c) Powder Coated Aluminium Handles 150 mm - 2 nos per leaf

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x600x 9 to 10 mm thick in floors etc. in approved shade, set & jointed in neat cement including and over 20 mm th screed bed in CM (1:6) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying Premium (1st) quality straight edge, stain free, gloss finish, square marbonite single charged vitrified tiles in 600x100x 9 to 10 mm thick in any pattern of light or dark coloured tiles as approved, on vertical surfaces such as skirtings, set & jointed in neat cement including and over 10 mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified.

Providing and Laying anti skid Premium (1st) quality full body vitrified coloured tiles in 400 x 400 x 7 to 8 mm thick in any pattern of light and dark tiles as approved, set & jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed in CM (1:4) and pointed in white coloured cement to match, in floors etc. complete all as specified and directed by Engineer in Charge.

M&L for Premium (1st) quality straight edge, ceremic tiles 300 X 300 mm and 7 -8mm thick, as in floors etc. in any shade and design/pattern of light & dark tiles as approved/matching with wall tiles , set & jointed in neat cement slurry and pointed in matching colouredpolymer cement based grout to match over and including 20mm thick screed bed in CM (1:6) complete all as specified and directed by Engineer in Charge.

S&F vitreous china premium/1st quality wall hung wash basin, white flat back min. size 500 x 400 mm, screws and plug and brackets etc ,including all accessories as recommended by manufacturer incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling half thread and fixed in position in all respect as per manufacturer's instructions and taking down existing of any description/size all as specified and directed by Engineer in Charge.

S&F vitreous china premium/1st quality wash down water closet pan (Pedestal Pattern / EWC) S trapfor ground floor and P trap for first floor white colour of size 520 x 360 x 390mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and including plastic seat cover as recommended by manufacturer closed pattern with flat bottom etc; and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing,including taking down existing of any description/ size complete all as specified and directed by Engineer in Charge.

S&F Concealed flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, with inlet/outlet ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories as recommended by manufacturer for fixing, packing and including actuator knob / flush plates and making space / cavity in existing brick work wall for fixing and taking down existing of any description / size complete in all respect all as specified.

S&F 6mm thick looking mirror with smooth finish edges/sides fixed to wall with stainless steel brackets/plugs/connecter/spacers/ screws etc. chrome finish with wooden beading & applying three coats of french polishd over one coat of primer on wooden beading etc. complete fixed in position all as specified and directed.

S&F Bib taps, CP, fency type long body with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position complete in all respect all as specified.

S&F Stop valves, fancy type, CP with long shank and cup ( concealed type ), exposed part kit with wall flange and regular body of concealed stop cock suitable for 15mm line with protection cap fixed in position complete in all respect all as specified.

S&F Angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete in all respect all as specified.

S&F wall mounted mixer assembly , brass chromium plated, comprising of centre outlet tap, double inlets for hot and cold water, non telephonic shower arrangement, with connecting legs and wall flanges, inlets suitable for 15mm bore connections complete all as specified and directed.

S&F stainless steel sink with drainage board, AISI 304 quality grade, 1.00 mm thick, glossy finish, for kitchen with plugs washers and CP waste coupling of 32 mm dia and including cantilever cast iron brackets, connecting union, etc, overall size 915mm x460/928mm x 458 mm with bowl size 410 x 355 x185/ 430x 355 x200mm including bottle trap 32 mm with 125mm and 175 mm long with wall connection pipe and flange and making good disturbed portion in CM 1:3 or PCC 1:2:4 as directed.

S&F cockroach trap gratings AISI-304 of size 150X150mm square in shape with 5mm border complete in all respect all as specified.

Repair to RCC sunshades, Chajjas, Balconies, Columns, bands, beams and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work & scaffolding where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed.

M&L for Baroda Green marble, machine cut as in shelves/steps/ landings/ cills/ jambs/skirting/border only in tile flooring and the like works and flooring etc, 15-16 mm thick including bull-nose the exposed sides/lengths, set and jointed in cement slurry over & including screed of 15 mm thick rendering in cement mortar (1:4) and pointed in cement mixed with pigment to match the shade of slab for fixing on concrete surfaces or with suitable adhesive for fixing on un-polished kota stone slabs including rubbing, cutting and mirror type granite polishing and including dismantling/demolition complete all as specified. Note : Single piece should be used in steps/cills/jambs/shelves.

Providing and fixing factory made extruded aluminium ventilators with 50 micron powder coating of frame of 63.5 X 38.10 X 1.29 mm including 5mm thick frosted glass in lower 55% portion of shutters and stainless steel wire gauge 0.36mm dia and 1.40 aperture in upper 45% portion of shutter and to be fixed with and including EPDM gasket to render the glazing, air and water tight etc. & aluminium beeds 20mm size with and complete fixed in all respect as specified.

S&F factory made aluminium 50 micron powder coated grill, opening size 101.6 X 63.5 mm (4"X2½") and of approx weight @ 1.345 Kg/sq.m complete fixed in position in windows in all respect as specified

S&F sheet glass shelf assembly consisting of 6mm thick glass shelf 300 x 300mm as in corners wide with bevelled edges/hatching of edges fixed with stainless steel 'D' bracket fixed and railing complete all as specified and directed.

S&F PTMT 450mm long shelf for wash basin, fixed in position complete all as specified and directed by Engineer in Charge.

S&F stainless steel tubing 25 mm dia chromium plated min 1.00mm wall thickness as in curtain rod complete including 02 Nos stainless steel brackets / finials fency type, stops fixed with stainless steel screws etc complete all as specified and directed.

S&F overhead shower 120mm dia with 225-230mm long brass shower arm with wall flange and incl all necessary accessories as recommended by manufacturer for fixing complete in all respect all as specified.

S&F PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in positions complete all as specified and directed by Engineer in Charge.

&F central hole basin mixer with popup waste system and 450 mm long braided hoses, fency type, cast copper alloy, with capstan heads, chromium plated screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15 mm bore of iron pipe complete all as specified and directed by Engineer in Charge.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 micron thick polythene film over 85/25 grade bitumen layer @ 0.5 Kg / Sqm complete all as specified and directed by Engineer in Charge.

S&F in repair cast iron 4 way junction combination for 100 mm bore with access door complete all as specified and directed by Engineer in Charge.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick LEAD FREE PVC Celuka ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F 5 mm thick with min density 600 Kg/cu.m LEAD FREE PVC Celuka ply of single side rigid laminate of approved color and other side plain white colour and pasted with solvent cement/ adhesive on frame work of cup boards complete as per manufacturer’s instructions complete all as specified and directed.

S&F 6 mm thick with min density 600 Kg/cu.m LEAD FREE PVC ply fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position all as specified.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs,

S&F tower bolts 250mm long of stainless steel 304 finished/of outer plate metal matt finished complete fixed in position all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 200mm long matt finished complete fixed in position all as specified.

S&F Piano/continuous hinge of size 19 mm stainless steel complete all as specified.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions all as specified.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified.

S&F Stainless Steel 304 grade wire Basket (avg. wait 2.5 to 4 Kg. per basket) of pull out type like plain/cup&saucer/bottle/multi purpose/2-3 shelf baskets etc. for kitchens of required suze complete fixed in position all as specified.

S&F wardrobe tube/hanging rod for CB of size 30X15mm and 0.6mm thick stainless Steel 304 grade rectangular high gloss finish complete fixed in position incl S&F brackets/screws etc. all as per manufacturer's instructions all as specified.

S&F stainless steel finished locks (double action) with 2 nos of keys min outer body size 75mm suitable for wardrobes/CB etc. complete all as specified.

Providing and Laying Premium (1st) quality digitally printed straight edge, glazed ceramic rectangle tile in approved shade and finish in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed.

M&L for machine pressed rubber moulded ISI marked precast cement concrete interlocking paver block any shape and size, of colour 50% red coloured and 50% grey coloured , confirming to IS-15658-2006 of 60mm thickness M-35 Grade and including filling of interstices with fine sand over and including 25mm thick layer of sand cusion complete all as specified and directed by Engineer in Charge.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 105 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

S&F Spray Docu painted Pressed steel frames made of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, hold fast etc., complete all as specified, size 125 x 60mm and incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed.

Providing and laying 3mm thick APP (Atactic Polyproplene Polymer) modified prefabricated five layer, weight not less than 4.0 Kg/Sqm water proofing membrane black finished, reinforced with non-woven polyster matt make as approved including of a coat of bitumen primer @ 0.40 ltr/sq.m by the same membrane manufacturer of density 0.87 to 0.89 Kg/Ltr at 25 degree C temperature and viscosity 70 - 160 cps Over the coat, 3mm th 5 layered APP membrane shall be laid using butane torch and sealling all joints etc after the surface complete as per standard practice as per manufacturers instructions. The vital physical and chemical parameters of the membrane shall be as under - (i) Joint strength inlongitueinal and transverse direction at 23 degree C as 650/450N/5cms (ii) Tear strength in longitudinal and transverse direction as 300 / 250 N/. Softening point of membrane not less than 150 degree C Cold flexibility upto 20 degree C when tested in accordance with ASTM (D05147) (iii) The laying of membrane shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed.

Chipping of unsound weak concrete / cover of reinforcement over slab, ceiling, column and walls or as per site requirement by chieseling maximum upto 30 mm depthand disposal of malwa from site complete all as directed by Engineer in Charge. Note : Rates of scaffolding is deemed to be included in the rates quoted by the contractor against item.

Supply and apply of rust remover cum passivator by brush in two coat @ 0.3 kg/m2/coat of Density: 1.01 Kg/l at 300C complete all as per manufacturer's instructions and all as specified. Note : 1. The application of rust removal shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item.

Supply and apply Cementitious Coating for Corrosion Protection having a cement based polymer modified rebar corrosion protection system by appling the first coat approx. 1mm thick layer of product carbonation resistance 2 mm of SikaTop Armatec®-108 or equivalent as specified corresponds to 20 mm of normal mortar; bond strength > 1N/mm2 according to ASTM C 882-78 applying @ 4 kg/m2 for two coats onto the prepared reinforcing steel with a medium- stiff brush. It is unavoidable that Sspecified product will also be applied onto the surrounding concrete. The second coat is applied in the same way after a waiting time of 2-3 hours (at +20°C) complete all as per manufacturer's instructions and all as specified. Note : 1. The application of Cementitious Coating for Corrosion Protection shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item.

Providing, mixing & applying two component Epoxy resin concrete Bonding coat on prepared RCC surfaces as per manufacturer's specification including prepartaion of surface by chipping and throughly cleaning of surface complete whereever required and as per directions of Engineer-in-charge. Consumption: 0.5 kg/m2. complete all as per manufacturer's instructions and all as specified. Product requirements: Complies with ASTM C 881 Type II Grade 2 Class B+C. Note : 1. The application of Epoxy Bonding Primer shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item.

Supply and apply a pre-batched one component polymer modified cementitious patch repair mortar in 25 mm thickness. Yield: approx. 0.84 ltr/kg. System requirements: compressive strength >= 50 N/mm2 (28 days) according to ASTM C 109; flexural strength >= 3N/ mm2 (7 days) according to ASTM C 293-79. Consumption of 2.1 Kg/Sqm/mm Note : The application of Polymer repair Mortar shall be got done through the authorised applicator of manufacturer of membrane only all as specified and directed. 2. Rates of scaffolding is deemed to be included in the rates quoted by the contractor against each item.

S&F 150mm bore PVC (SWR) pipes single socketed in any length with rubber ring joint fixed to wall complete all as specified and directed by Engineer in Charge.

S&F 150mm bore PVC (SWR) bends in any radius complete all as specified and directed by Engineer in Charge.

S&Fin replacement of existing unserviceable FTL with new technolgy self blasted LED retrofit tube lamp with thermoplastic body with high lumen 18 w 6500K suited for installation in existing T5 tubelight including necessary electric connection with box type batten including taking down old unserviceable tube light fitting of any description all as specified and directed.

S&F LED mirror light with linear and compact 9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser complete all as specified and directed by Engineer in Charge.

M & L for Modular Bell push 6A, 1 module complete all as specified and directed by Engineer in Charge.

S&F LED lamp 9W B22 complete all as specified and directed by Engineer in Charge.

Earthing complete and supply and fix earthing with galvanised steel earth plate electrode 60cmx60cmx6mm thick, burried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of earth plate not less than 1.5 Mtr below normal ground level connected to galvanised earth lead wire 4.0mm dia by means of bolt, nut check nuts and washer of galvanised iron or steel including test point PCC Pit and RCC cover in PCC 1:2:4 (type B-1) including iron angle frame 40x40x6mm and medium grade GI water pipe 20mmdia with funnel and wire mesh and 15 mm bore GI pipe light grade protection pipe including excavation and charcoal , common salt surrounding with 15 cm all around the plate, complete all as specified and directed by Engineer in Chargre.

Supply and replace environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LED of capacity 10 Watt complete all as specified and directed by Engineer in Charge.

S&F in replacement Sheet metal enclosures distribution board, vertical type double door three phase 415 volts, 4 ways (one incoming three phase and four out going three phase) for MCCB, ISOLATOR and MCB's comprising three phase four wire copper strip bus bar of appropriate capacity complete all as specified and directed by Engineer in Charge and comprising of the following:- (a) MCCB four pole 63 Amps AC 415 Volts, 16 KA - 01 No as incoming. Note : (i) The DB shall be VTPN series of MDS-LOADKONTAKT Havells - Cat Part - DHDPTVODRW04 or equivalent L&T, ABB, (ii) The DB shall be flush fixed and making good the disturbed surface matching with existing specifications shall be part of job at no extra cost. (iii) Connection of the MCCBs/MCBs with cable shall be made through appropriate size pin / bottle type thimble properly crimped. (iv) All the vacant holes of the DB shall be provided with blank plates of appropriate size.

S&F exhaust fan AC Single phase 230/240 V of 300 mm sweep with louver complete all as specified and directed by Engineer in Charge. Note : Fixing of Exhaust Fan on wall with suitable size anchor bolt, making hole in wall for grounting and making good the disturbed surface including plaster work shall be part of job at no extra cost.

S&F in replacement MCB SP 6 to 32 Amp complete all as specified and directed by Engineer in Charge.

S&F in replacement MCB SPN 6 to 32 Amp complete all as specified and directed by Engineer in Charge.

Swami Engineers

Arneja Builders

Buttar Construction Co.

FAVOURITE ENGINEERS