SUPPLY, INSTALLATION AND COMMISSIONING OF MACHINERY AND EQUIPMENT FOR COLD STORAGE AT MULTIBRAND MILK PARLOUR KHANAPARA UNDER RIDF-XXV

Amount

Supply of 62.5 KVA 3 phase Silent DG set

Transportation uploading and unloading

Earthing 4 Nos

Change over switch

Aluminium armoured cable 50Sqmm 3.5 Core

Cabling laying installation & Electrical works

Fuel (Diesel) for Trial run

Refrigerated Sweet Display Counter

Vici Cooler

Garden Table and Chair : 1 Plastic table, 4 Plastic Chairs, Designer and Colour: Blue/Red/Pink/White

Patio Umbrella : Fabric: Polyester, Umbrella Shape: Round, Height: 10 ft, Diameter: 9 ft, Waterproof and Colour: Blue

Supply of Automate Chiller room with Refrigeration unit.:

Demolishing cement concrete manually/by mechanical means including disposal of materials within 50 metres leaqd as per direction of Engineer in charge.

Earth work in surface excavation not exceed-ing 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of exc-avated earth upto 50 m and lift upto 1.5 m, asdirected by Engineer-in- Charge: All kinds of soil

Dry brick on edge flooring in required pattern with bricks of class designation 7.5 on on a bed of 12 mm mud mortar including fillings joints with sand , common burnt clay non modular bricks.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-all work upto plinth level .In prop. 1:4:8 91 cement: 4 coarse sand :8 graded stone aggregate 40mm nominal size)

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thic

Steel reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars

Centering and shuttering including strutting, propping etc. and removal of form work for.

Providing and laying in position ready mixed or site batched design mixcement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources,Portland /Pozzolana / Ordinary Portland /Portland Slag cement, admi-xtures in recommended prop-ortions as per IS: 9103 to accel-erate / retard setting of concrete, to improve dur-ability and workability without impairing strength; including pumping of conc-rete to site

Tile brick masonry with common burnt clay F.P.S. (non modular) tile bricks of class designation 10 in foundation and plinth in: 6.16.1 Cement mortar 1:4 (1 cement : 4 coarse sand)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.With river sand or silt obtained by truck carriage

Providing corrugated G.S. sheet roofing including vertical /curved surface fixed with poly-mer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steelprimer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces),excluding the cost of purlins, rafters and trusses and including cutting to

Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete.

Applying priming coats with primer of approved brand and manufacture, having low VOC ( Volatile Organic Compound) content.13.85.1: With ready mixed pink or grey primer on wood work having low VOC( Volatile Organic Compound) content less than50grams /litres.

Painting with syenthetic enamel paint of approved and manufacturer of required colour to give and even shade 13.99.1: One or more coats on old work.

Providing and fixing stainless steel ( Grade 304) railing made of Hollowtubes, channels, plates etc., including welding, grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete, i/c fixing the railingwith necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side ofwaist slab with suitable arrangement as per approval of Engineer-incharge,(for payment purpose only weight of stainless steel membersshall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Providing & fixing fly proof wire gauze to windows, clerestory windows &doors with M.S. Flat 15x3 mm and nuts & bolts complete.