Renovation works for SLB Government Higher Secondary School building Agastheeswaram at NAGERCOIL in Kanyakumari District

Amount

31) Weathering course over roof slab with proportion of brick jelly 20mm to lime (32:12 1/2) by volume

37.1) White washing 3 coats (slaked)

39) Supplying and fixing of MS Grills in position

41) Painting 2 coats - New "iron work"

55.2) Supplying and fixing of Flat Back Urinal with Accessories

Electrical arrangements 74) Charges for assembling and fixing of ceiling "Fan"

76) Supplying and fixing of 8 SWG G.I. wire

78) Providing Earthing Station using pipe electrode as per IS3043 (Type I)

87) Supplying and fixing of ELCB Single phase

112) Supplying and fixing of Exhaust Fan 300 mm dia

Annexure 2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

6.6.1) Brick work in C.M. 1:5 (F& B) using Kiln Burnt Country bricks of size 22 x 11 x 7 cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture

9.6.1) Brick work in C.M. 1:6 using Kiln Burnt Country bricks of size 22x11x7cm (8 ¾ " x 4 ¼ " x 2 ¾ ") using crushed stone sand with Admixture a. In Ground Floor

10.6.1) Brick partition work in C.M. 1:4 using Kiln Burnt Country bricks of size 22x11x7 cm (8 ¾"x4 ¼ "x2 ¾") 110 mm tk (B.P.) using crushed stone sand with Admixture b. In Ground Floor

16.2.2) Precast Jally ventilator 50mm thick using standardised concrete mix M30 Grade using crushed stone sand a. In Ground Floor

21.5.2) Supplying and fixing of soild UPVC door shutter with frame

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

23.2.3) Supplying and fixing of 150mm long and 12mm dia Aluminium Tower Bolts (with required screws)

23.2.4) Supplying and fixing of 125mm x 30mm Aluminium Butt Hinges with Nylon Washers (with required screws)

23.2.5) Supplying and fixing of 250mm long and 16mm dia Aluminium Aldrops with required screws, bolts and nuts

23.2.6) Supplying and fixing of 150mm long Aluminium Ornamental Handles with required screws

23.2.7) Supplying and fixing of Brass Screws (30 x 6mm)

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

32.1.4) Pointing the pressed tiles with C.M. 1:3 mixed with WPC using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.1) Two coat of Oil Bound Distemper over the primer coat of white cement

38.4.3) Painting the old walls with two coats of Oil Bound Distemper over existing wall surfaces including thorough scrapping

38.6) Primer coat using one coat of white cement over the cement plastered/ concrete new wall surfaces or other similar works

40.1) Two coats of painting over the old wood work including Removing old paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work and other similar works including scrapping and removing old paint from structural steel by manual labour

44.2.1) Rain water harvesting using defunct borewell and providing perforated cover slab in Standardised concrete mix M30 Grade by using 3mm-10mm HBGS Jelly using crushed stone sand with Admixture a) Providing pit

44.6.1) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe (UPVC Special Clamp)

50.6.1) Precast slab 50 mm tk.in C.C.1:3:6 mixed with fibre using crushed stone sand

51.1) Supplying and fixing of HDPE water tank 200 lit capacity with ISI mark

52.2) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., a. 32 mm dia

b. 25 mm dia

52.4.1) Supplying, laying, fixing and jointing the following pipes as per ASTM D-1785 of schedule 40 including the cost of suitable UPVC specials with PVC special clamps etc., (fully consealed in walls) c. 20mm dia

54.1.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Long body)

54.2.2) Supplying and fixing of 15mm dia Engineering Polymer Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

58.3) Supplying and fixing of PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose with bakelite battern holder

65.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming lS: 694:1990 for Fan point (Open wiring)

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring) using PVC electrical box

71.2) Supplying and fixing of 32 Amps triple pole main switch with fuse and neutral link

71.3) Supplying and fixing of 63 Amps triple pole main switch with fuse and neutral link

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

77.5.1) Run off 2 Wires of 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 (Open Wiring)

79.2.1) Supplying and fixing of 3 Nos. of 32 Amps Fuse Unit

79.2.3) Supplying and fixing of 3 Nos. of 63 Amps Fuse Unit

80.1) Supplying and fixing of 450x375x20mm T.W. plank

87.1) Supplying and fixing of Three Phase ELCB/RCCB

100) Supplying and fixing of 9 watts LED Bulb

101) Supplying and fixing of 25 watts LED with street light fittings

102) Supplying and fixing of 4'18 watts crystal LED tube light

105.1) Run off main 4 wires of 4 Sq mm. (Three Phase EB service connection)

105.2) Run off main 2 wires of 4 Sq mm. (Single Phase EB service connection)

105.3) Run off main 4 wires of 6 Sq mm. (Three Phase EB service connection)

110) Supplying and fixing of MCB 240V/415V 50 HZ Single Pole 6A to 32A, 10KA

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 40mm dia GI pipe

238.1) Anticorrosive treatment for window grills

361.1) Supplying and laying of Concrete designer tiles flooring in C.M. 1:3 (one of cement and three of crushed stone sand) 20mm thick

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

571) Supplying and fixing of Galvalume sheet roofing 0.47mm thick

796) Two coat of Plastic emulsion paint including primer for new wall surfaces

796.1) Two coat of Plastic emulsion paint without primer including thorough scrapping for old wall surfaces

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2) Dismantling, clearing away and carefully stacking materials useful for re-use of Pressed Tiles & Weathering Course

800.2.1) Dismantling, clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tile Roof finish in cement mortar

800.3) Clean removal of cement plaster from the existing wall surfaces

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of brick masonry in cement mortar walls a) Under 3.00m height

800.5) Dismantling clearing away and carefully stacking materials useful for reuse of Floor finish & dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

800.13) Removal of Cut Stone Slabs / RCC Cover Slabs

RAHUL

M K SARAVANAN

J B BUILDERS

T.M. BUILDERS

T.subramonian