Day to Day Minor Addition and alteration of Electrical Installation work in Academic Area at IIT Delhi

Amount

Wiring of Light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable insulated recessed steel conduit with modular switch, modular plate suitable GI Box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc as required.

Group C

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor Single core cable in surface/ recessed steel conduit as required.

2X1.5 sq.mm + 1X1.5 sq.mm earth wire

2X2.5 sq.mm + 1X2.5 sq.mm earth wire

2X4.0 sq.mm + 1X4.0 sq.mm earth wire

2X6.0 sq.mm + 1X6.0 sq.mm earth wire

2X10.0 sq.mm + 1X6.0 sq.mm earth wire

4X4.0 sq.mm + 2X4.0 sq.mm earth wire

4X6.0 sq.mm + 2X6.0 sq.mm earth wire

4X10.0 sq.mm + 2X6.0 sq.mm earth wire

Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper single core cable in the existing surface/ recessed steel/PVC conduit/Channel as required.

3 X 2.5 sq.mm

3 X 4.0 sq.mm

6 X 4.0 sq.mm

3 X 6.0 sq.mm

6 X 6.0 sq.mm

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connection but excluding modular plate etc. as required.

Supplying and fixing 20A, 240V, SPN Industrial type Socket outlet, with 2 pole and earth, metal enclosed plug top along with 20A "C"curve, SP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connection, testing and commissioning etc. as required.

Supplying and fixing 30A, 415V, TPN Industrial type Socket outlet, with 4 pole and earth, metal enclosed plug top along with 30A "C"curve, TP MCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connection, testing and commissioning etc. as required.

Supplying and fixing following size/ modules, GI/PVC box along with modular base & cover plate for modular switches in recess etc. as required.

1 or 2 Module (75mmX75mm)

6 Module (200mm X 75mm)

8 Module (125mm X 125mm)

12 Module (200mm X 150mm)

Supplying and fixing 5A to 32A rating. 240/415V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connection, testing and commissioning etc as required.

Single Pole

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required.

5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying & fixing following way, single pole and neutral sheet MCB distribution board 240V on surface/ recess complete with tinned copper bus bar neutral bus bar, earth bar, din bar interconnection powder painted including earthing etc as required. (but without MCB/RCCB/Isolator)

8Way, Double door

Supplying & fixing following way horizontal type three pole & neutral sheet steel MCB distribution board 415V on surface/ recess complete with tinned copper bus bar neutral bus bar, earth bar, din bar interconnection powder painted including earthing etc as required. (but without MCB/RCCB/Isolator)

4way (4+12), Double door

8way (4+24), Double door

Supplying & Installation following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts etc as required.

8way (4+24), Double door

12way (4+36), Double door

Supplying & Installation following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I suspenders including G.I bolts & nuts etc as required.

300mm width X 50mm depth X 1.6mm thickness

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4X16 sq.mm (28mm)

4X25 sq.mm (28mm)

3.5X 35 sq.mm (32mm)

3.5X 50 sq.mm (35mm)

3.5X 70 sq.mm (38mm)

3.5X 95 sq.mm (45mm)

3.5X 185 sq.mm (57mm)

3.5X 300 sq.mm (70mm)

Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4X25 sq.mm

3.5X 35 sq.mm

3.5X 50 sq.mm

3.5X 70 sq.mm

3.5X 95 sq.mm

3.5X 120 sq.mm

3.5X 150 sq.mm

3.5X 185 sq.mm

3.5X 240 sq.mm

3.5X 300 sq.mm

Providing & fixing 6 SWG dia G.I wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/coke and salt as required.

Providing and fixing 25mm X 5mm copper strip in 40mm dia G.I pipe from earth electrode including connection with G.I nut bolt, spring, washer excavation and refilling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Supplying, Installation, Testing & Commissioning of following MCCB with thermomagnetic release and terminal spreader in existing cubical panel board/DB including drilling holes in the same, making connections & testing etc. as required.

125 A, having breaking capacity 16 kA TPMCCB

150 A, having breaking capacity 16 kA TPMCCB

125 A, having breaking capacity 36 kA FPMCCB

200 A, having breaking capacity 36 kA FPMCCB

250 A, having breaking capacity 50 kA FPMCCB

Providing and fixing M.S. Fan Hook clamp type I or II of 16 mm dia M.S. bar, bent to shape with hooked ends in R.C.C. slabs or beams during laying, including painting the exposed portion of loop, all as per standard design complete as required.

Supplying, installation, Testing & Commissioning of 600mm X 600mm (+- 5%) recess mounting ,34-36 Watt LED Panel (including dismentaling of existing lights on buy back basis)of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free,(flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with, 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 3000°K / 4000°K / 5700°K/6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5sq mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C)

Supplying, installation, Testing & Commissioning of LED Surface Down lighter (Round/square/ Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%,Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection ,THD < 10%, P. F.≥0.95, IP20, CRI >80, UGR (Unified Glare Rating) <19, Flicker free (flicker should be below 5%), life time (LED, Driver & electrical circuitry), lifetime of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing Complete in all respect i/c external connections with 1.5 sqmm. FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C).Powder coated die cast /Extruded aluminium Body including trim.

Supplying, installation, Testing & Commissioning of Surface Mounted Panel light 2x2 ft.,34-36 Watt(including dismentaling of existing lights on buy back basis) of following body material and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range -5 0C to 40 0C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80,UGR (Unified Glare Rating) < 19, Flicker free,(flicker should be below 5 %), life time (LED, Driver& electrical circuitry), of minimum 50000 Burning Hours with , 70% of initial Lumen maintained till life ends ,CCT 3000°K / 4000°K / 5700°K /6500°K (As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. Complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy >135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast /Extruded aluminium Body (Thickness > 1.20 mm)

Supplying, Installation, Testing & Commissioning of LED surface mounted Batten light(including dismentaling of existing lights on buy back basis) of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%, Operating voltage AC 140-270 Volt, frequency 50/60 hz, Operating temp range-5 °C to 40 °C, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10%, P.F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5 %), life time (LED, Driver & electrical circuitry), of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends, CCT 3000°K / 4000°K / 5700°K /6500°K(As per ANSI Bin), SDCM(Standard Deviation Colour Matching) <3, Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/ Name Engraved/Embossing/ Screen printing on housing. complete in all respect i/c external connections with 1.5 sqmm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required with Minimum 5 year OEM warranty. System lumen efficacy ≥105 <120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder Coated CRCA Sheet Body(Thickness ≥ 0.50mm)

Supplying & fixing following rating, single & double pole, 240V, MCB "C" series in the existing MCB DB complete with connections, testing and commissioning etc. as required.

40A SP MCB

63A SP MCB

40A DP MCB

63A DP MCB

Supplying and fixing MCB sheet steel enclosure, phosphatised, powder painted MCB DBs with din rail on surface/recess complete as required.

Supplying and fixing DLP U-PVC trunking of 105mm x 50mm on surface etc. as required.

Supplying and fixing full flexible cover of width 85mm on existing DLP U-PVC trunking etc. as required.

Supplying and fixing of internal angle for 105mm x 50mm existing DLP U-PVC trunking etc. as required.

Supplying and fixing of external angle for 105mm x 50mm existing DLP U-PVC trunking etc. as required.

Supplying and fixing of End cap for 105mm x 50mm on existing DLP U-PVC trunking etc. as required.

Supplying and fixing of 6 module arteor frame for 85mm cover (Make:- Legrand)

Supplying and fixing following modular switch/ socket on the existing U-PVC trunking system including connections etc. as required.

20 A Socket

20 A Switch

Supplying & fixing following rating 415V, "C" curve MCB in the existing MCB DB complete with connections, testing & commissioning etc. as required.

32 A TP MCB

63 A TP MCB

63 A FP MCB

Making a hole with Bookie inside the road including dressing, making the same etc. as required.

Fault Locating of LT cable with the help of fault locating machine, including identification and making of fault complete as required.

RCC cutting of wall / trench / floor in Rising Mains shaft for cable passage etc as required.

S,I,T,C of Surface mounting 1feet X 4 feet (±5%) LED luminaire with chain and hook (including dismentaling of existing lights on buy back basis) equipped with CRCA powder coating housing, antiglare polycarbonate diffuser with energy efficient electronic driver suitable for SMD LEDs with following features :- suitable for operation voltage and frequency : 130-300V AC, 50Hz, wattage 36Watts, output lumens not less than 100 lm/Watt, CCT not less than 5700K, Normal surge protection 205kV , power factor not less than 0.95 minimum IP protection 20 etc. as required.

S,I,T,C of Recess mounting 1feet X 4 feet (±5%) LED luminaire with chain and hook (including dismentaling of existing lights on buy back basis) equipped with CRCA powder coating housing, antiglare polycarbonate diffuser with energy efficient electronic driver suitable for SMD LEDs with following features :- suitable for operation voltage and frequency : 130-300V AC, 50Hz, wattage 36Watts, output lumens not less than 100 lm/Watt, CCT not less than 5700K, Dimension LxWxH in mm (1195 x 295 x 70mm), Normal surge protection 205kV , power factor not less than 0.95 minimum IP protection 20 etc. as required.

Supplying & fixing 63A, 415V, 5pin Industrial type socket outlet with 4pole and earth metal enclosed plug top along with 63A "C" curve, TPNMCB in sheet steel enclosure on surface or in recess with chained metal cover for the socket outlet and complete with connection, testing and commissioning etc. as required.

S,I,T,C of high speed wall mounting fan 400mm sweep, copper winding capacitor start suitable for operation on 240V, 50 Hz, AC supply with inbuilt speed regulator etc. complete with all standard accessories such as motor, blades clamps etc. as required.

S,I,T,C of 12'' (300mm) size, 1400RPM copper wound heavy duty metalic exhaust fan of double ball bearing capacitor start suitable for 230V, 50Hz, single phase A.C supply and complete with accessories such as motor, legs, frame, Louvers and Nut & bolts etc. as required.

S,I,T,C of following size copper wound ventilation fresh air fan of double ball bearing capacitor start suitable for 230Volt, 50Hz single phase A.C supply and complete with accessories such as motor, legs, frame, louvers and Nut & bolts etc. as required.

250mm fresh air fan (10")

Supplying & laying of following size PVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required.

4 Core X 16 sq.mm

3.5 Core X 70 sq.mm

3.5 Core X 185 sq.mm

3.5 Core X 300 sq.mm

Supplying & laying of following size PVC insulated and PVC sheathed/ XLPE Aluminium power cable of 1.1 KV grade on wall surface as required.

4 Core X 25 sq.mm

3.5 Core X 35 sq.mm

3.5 Core X 50 sq.mm

3.5 Core X 95 sq.mm

3.5 Core X 150 sq.mm

Credit of Dismantled unserviceable material. The contractor cannot quote either minus rate or zero for these items.The minimum total amount to be quoted for these items is Rs.46,000.00

Old damaged 34 w -36 watt, recessed/surface type 600mm x 600mm LED Fitting

Old damaged 34 w -36 watt , recessed/surface type 1 feet X 4 feet LED Fitting

Old damaged 18-20 watt 4' LED batten

Old damaged 15 watt round /square type LED down lighter

M/s S.K.Industries (BID ID -3325751)

MODERN CONCEPT CONSTRUCTIONS (BID ID -3325275)