Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹42.7 LAccepted-AOC D K CITY C 42 MINNIEBAY POST BOX NO 340 HPO PORT BLAIR 744 103 | PORT BLAIR | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹46.2 L+₹3.5 L (8.22%)Rejected-AOC 1ST FLOOR PRABHA SHOPPING COMPLEX OLD PAHARGAON DOLLYGUNJ PORT BLAIR SOUTH ANDAMAN ANDAMAN NICOBAR 744103 UDYAM AN 01 0000143 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744103 | L2 | Rejected-AOC Other Than Lowest | |
| 3 | L3₹47.0 L+₹4.3 L (10.2%)Rejected-AOC OPP CCS GARACHARMA PORT BLAIR 744105 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744105 | L3 | Rejected-AOC Other Than Lowest | |
| 4 | L4₹47.1 L+₹4.5 L (10.5%)Rejected-AOC SHOP NO 6 BENGALI CLUB MIDDLE POINT SRI VIJAYA PURAM 744101 | SOUTH ANDAMANS | ANDAMAN AND NICOBAR ISLANDS | 744101 | L4 | Rejected-AOC Other Than Lowest | |
| 5 | L5₹48.0 L+₹5.3 L (12.4%)Rejected-AOC | L5 | Rejected-AOC Other Than Lowest |
Tender Value
₹44.5 L
EMD Value
₹89,000
Closing Date
14 Nov 2022, 6:00 pmClosed
GARRISON ENGINEER BRICHGUNJ
GARRISON ENGINEER BRICHGUNJ PORT BLAIR-744 103
SPECIAL REPAIR TO BLDG NO P62 AND ADDN AND ALTERATION TO BAFFLE RANGE AT BRICHGUNJ MILITARY STATION PORT BLAIR
2022_MES_545496_3
8265A
Open Tender
Civil Works
Item Rate
180 days
BRICHGUNJ
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GARRISON ENGINEER BRICHGUNJ
₹89,000
Yes
19 Nov 2022
31 Oct 2022
16 Nov 2022
31 Oct 2022
14 Nov 2022
7 Nov 2022
31 Oct 2022 - 7 Nov 2022
Amount
Demolition of RCC Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work all as specified.
S&F Steel works In tubular/ posts/ trusses/ purlin including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161-1797 grade St 240 all as specified.
S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc and fixed by riveting or welding or with nut and bolts (including nuts and bolts) conforming to Fe-410-W grade E 251 Quality B complete all as specified.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based corrugated steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
S&F 0.50 mm thick prepainted galvalume aluminium zinc coating GI based plain steel sheet of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self taping screws as specified.
S&F MS work in wind ties for roof including securing bolts all as specified
S&F for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 all as specified.
S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls all as specified.
M&L for precast cement concrete solid block masonry with solid blocks using PCC 1:3:6, type C1 (using 20mm graded stone aggregate), exc. 10cm in width, set in CM 1:4 all as specified.
M&L Plain cement concrete 1:2:4, type B2 using 20mm graded stone aggregate as in bed block for fixing truss etc complete all as specified.
M & L for rendering 10 mm thick in CM I:6 finished even and smooth without using extra cement etc complete all as specified.
M&L Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement.
M&L for oil bound distempering two coats over a coat of alkali resistant priming paint including preparation of new plastered or unplastered surfaces of wall complete all as specified.
M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified.
M&L Painting to new steel and iron surfaces of exc. 10cm wide or girth by two coats of synthetic enamel paints over a coat of red oxide primer including preparation complete all as specified.
M&L for anodised aluminium snap grid frame work for ceiling 605mm x 605mm using aluminium anodised sections with 35 x 25 x 1.5 mm main tee and 25 x 25 x 1.4 mm cross tee and wall angle including cutting, drilling, jointing etc complete including provn of 3.15mm dia GI wire suspenders fixed with adjustable connectors and providing 4mm thick E-Boards (Classic) 600mm x 600mm size duly applied with two coats of oil bound distemper over a coat of primer all as specified.
Taking down cement plaster on Brick / Concrete surfaces incl raking out joints, hacking for key scrubbing down with water and Removing Rubbish out side of the MD Land all as directed by Engineer-in-Charge.
M & L for rendering ( Recron plastering )of 30 mm thick in CM I:4 finished even and smooth without using extra cement etc complete.
M & L for rendering ( Recron plastering )of 20 mm thick in CM I:4 finished even and smooth without using extra cement etc complete.
M & L for rendering of 20 mm thick in CM I:4 finished even and smooth without using extra cement etc complete.
Two coats of Acrylic exterior emulsion paint as in old wall/facia/border complete including after removal of existing treatment all as specified & directed by Engr-in-Charge. Make-ASIAN(APEX), BERGER (WEATHER COAT), SHALIMAR(XTRA PREMIUM)
Taking down and refixing ceiling fan and connecting up including provision of cable from ceililng rose or connector to fan complete all as specified and as directed.
Supply and fix 50 mm bore GI tubing medium grade laid in floors or fixed to wall in any length with screwed and socket joints together with screwed and socket joints and grouted into walls and making good the distrubed surfaces complete complete all as specified and directed.
Island Agency
DEEPAK AGENCIES
Bharat Udyog
Bismi Builders & Enterprises
M/s Kamal Electrical
M/s Saina Enterprises
P Babu
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .