PROVN OF ROAD AT MD ACCN AT GG FORT, SPECIAL REPAIR TO ROAD FROM UNIT KOTE TO JCO CLUB AND MAIN GATE TO OFFICE COMPLEX OF MDC AND SPL REPAIR OF BLACK TOP ROAD INSIDE ASCON NODE UNDER GE AMRITSAR

Amount

M&L for repair to pot holes of any depth, not exc 01 sqm each including sweeping free from dust and mud or water scouring sunken surfaces in roads, paths etc cutting around edges to at least 30mm in depth and making good by applying tack coat with paving bitumen @ 5Kg per 10 Sqm, putting in premixed bituminous macadam well rammed and sealed with binder @ 9.8Kg per 10 Sqm, blended with 0.09Cum of stone chippings 6.3mm size and again well rammed to true surface complete all as specified and directed. Note :Material for premixed bituminous macadam shall be mixed in hot mixing plant.

Material and labour for premix bituminous macadam laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) and binder content of 4.0% by weight of total mix using coarse aggregate grading 2 (upto 40mm size) rolled with 8 to 10 tonne power road roller including preparation / cleaning of surfaces and applying tack coat with paving bitumen @ 5 Kg per 10Sqm complete all as specified and directed. Note : (a) Material for premix bituminous macadam shall be mixed in hot mixing plant. (b) The premix bituminous macadam shall be laid with mechanical paver. (c) The cost of aforesaid is deemed to be included in the quoted rate.

Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags/air compressor to remove all loose dirt etc and applying evenly a priming/track coat with bituminous primer (VG-10) @ 5kg per 10 Sqm and laying bituminous Premixed semi dense asphaltic concrete 30mm thick (minimum consolidated thickness) with 5.5% binder (VG-30) content by weight of total mix, rolled and compacted with 8 to 12 Tonne power road roller to required gradient and camber complete all as specified Note : (a) Material for SDAC shall be mixed in hot mixing plant. (b) Mix design of bitumenous SDAC will be got done from approved Lab. (c) The pemix carpet shall be laid with machenical paver.

Material and Labour for marking lines dashes, arrows, letters etc on road pavement and the like of any width with using thermoplastic compound white paint hot applied 2 mm thick including glass with machine confirming to BS3262 and according to the specification laid down IRC & MOST (Ministry of Surface Transport) specification 20011(4th revision) complete all as specified. Note:- Marking shall be carried out with thermostat machine

M&L for excavation over area n.exc. 1.5m deep and getting out Hard/Dense soil complete all as specified and directed.

M&L for preparing of WBM surfaces by brushing with wire brushes for removing caked ,mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compresser/gunny bags to remove all loose dirt and applying evenly a priming tack coat with paving bitumen primer @ 10kg/10 sqm using paving bitumen VG 10 and laying semi dense Asphaltic bituminious concrete ( SDAC ) 40mm consolidated thickness with 5.5% binder content VG 30 by weight of total mix with mechanical paver mixing in hot mix plant , rolled and consolidated to required camber and gradient with 8 to 10 tonne mechanical power roller complete all as specified and directed. Note : (a) Mix Design of bituminous SDAC will be got approved from approved lab as specified.

Material and labour 15cm thick (compacted thickness) WBM,(in two layers of 7.5cm each) with coarse aggregates of (Granite, trap or Basalt stone) of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber with 8 to 10 Tonne power road roller complete all as specified and directed

Material and labour for 150 mm thick (spread thickness) soling (or sub base ) with broken boulders or quarried granite, trap or basalt stone, interstices filled, surface formed and rolled with 8 to 12 tonne power road roller and consolidated to required gradient and camber complete all as specified and directed

M&L for Moorum/red bajri including earth filling in floors or paving,laid in layers n exc. 15cm thick, spread levelled including earth and rammed including watering, finishing to required shape and size complete all as specified and directed.

Material and labour for continuous brick edging, with width equal to the width of the brick laid dry on end vertically with burnt clay bricks of sub class 'B' (old size bircks) including necessary excavation ,embedding bricks in the ground , tamping ground around bricks, removing any surplus spoil complete all as specified and directed

M&L for Rolling and consolidating the forming surfaces in cutting with 8 to 12 Tonne Power rollers complete all as specified and as directed.

Supply and fixing in repair for CAT EYE yellow/orange/red colour road studs ABS plastic body confirming to IS-67-1977 having road capacity of 40 tonnes heavy reflector yellow colour both side complete all as specified and directed(at road work in GG Fort). Make : DARK EYE, TATA BP SOLOR INDIA LTD, GREEN LITE

S&F two way (dual direction) reflective (Cat eye) of dimensions 110mm x 128mm x 29.50mm (Model No - DA 971) of impact resistance aluminium alloy body with Amber / red / white reflective panels and fixing the same on road surface by applying approximately 100 gm Epoxy mixture and placing the cat eye without applying exessive pressure and additional fixed with 12mm dia and 120 mm long zinc plated steel nail at the centre of cat eye complete all as specified and directed by Engineer-in-Charge(At road work inside ASCON NODE). Note : (i) Model No DA - 971 of make Dark eye or equivalent model of 3 M (India Ltd) / Greenlite or any other make as approved by GE or all other equivalent makes specified in Appendix 'B'.

TARSAM LAL SAINI CONTRACTOR

ss enterprises