Civil works for upgradation of ACS 235 and DATLINK lab in SLRDC,HAL factory area, Hyderabad

Removing old damaged ESD/PVC flooring of any thickness sticked to concrete / Mosiac floor, stacking them in rolls and handing over to stores carefuuly with in a lead of 300m including cost of tools,labour,taxes etc all as directed by EIC.

Providing and laying conductive single layer homogenous ESD flooring with marbled surface pattern as per EN649 of ARMSTRONG (Royal LG1 ) make or equivalent product from TARKETT make including thermal welding including cleaning the surface, providing copper ribbons of 25mm width and 25micron thcikness along the joints forming a grid of 1.83m x 3.0m. The sheet should have thickness of 2mm, width of 1.83mts & length between 16 to 25mts with cost of all materials,wastages, labour,tools, adhesive etc all as directed by EIC.(The sheet should have residual indentation of 0.06mm as per EN 433, the color fastness > 6 as per ISO105-B02, vertical resistence < 1 x 107 Ohm as per EN1081 and the static electric charge 0.1 kV as per EN1815.The product should also confirm to class Bfi - s1 in flammability test as per EN 13501 - 1, slip resistence of R9 as per BGR 181, dynamic coefficient of friction with class DS as per EN13893. The wear group of sheet is P as per EN649 all asp per the directions of EIC.(Surface has to be cleaned,free from dust, ,fixing with adhesive, laying of ESD sheet has to be done with company authorized personnel, after laying testing has to be done to ascertain the parameters meet the company mention limits.)

Supply and installation of vertical blinds of approved colour with guide channel of VISTA/TOUCH make or equivalent including ,material, labour,taxes etc all as approved and directed by EIC.

Demolishing the existing cement plastered brick masonry made in Cement mortar of any thickness/concrete as directed and sorting / stacking the useful materials from site with a lead of 500mts including cost of tools, labour, transportation etc., all as directed by EIC.

Providing and constructing brick work with best locally available frogged flyash bricks in CM 1:4 for walls at all levels and for all thickness in standard bonds including raking out joints 10mm deep to receive plaster, chipping of existing brick walls / concrete surfaces where ever new walls are meeting in order to arrest cracks, applying cement slurry before constructing wall to have proper bond, necessary scaffolding, curing etc., complete with rates including cost of material ,tools, labour, transportation etc., all as directed and specified by EIC.

Plastering external/internal brickwalls / concrete surfaces with C.M 1:4, 20 mm thick trowelled to even and smooth finish including cost of all materials, labour, curing, scaffolding, at all heights,etc. at heights mentioned below including material,scafolding etc as directed by EIC.

Supplying and applying approved quality approx 1mm thick wall care putty to walls(internal/external) surfaces from Asian paints/Wallplast/BIRLA make and carrying out punning to obtain smooth & even finish using EMERY paper 180 including cost of material, labour, wastage etc.,complete all as approved,all made good, specified and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.

Providing and applying on prepared surface and applying two coats of interior Plastic emulsion paint of Asian paints or equivalent make of approved shade over a coat of primer Asian paint or approved make with rate including cost of all materials, tools,labour ,scaffolding,wastage, etc., complete at all as approved, specified , all made good and directed by EIC. Contractor should ensure all safety measures if work is carried out at heights at his own cost.The rates include for: (a) Use of all scaffoldings and cradles including hoisting and lowering.(b)Taking down, cleaning as directed and refixing blinds and fittings, picture rods, cornice poles and small items of builder's hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted. (c) Use of dust sheets and other coverings for the protection of fixtures, fittings, furniture, etc. (d) Shifting of movable cupboards and furniture as required and replacing in position. (e) Work in patches (over one square metre each) including matching with existing work and marrying in at the edges. (f) Removing all splashes, drops, dirt, etc. and leaving premises in a clean state.

Providing, manufacturing and erecting Partly glazed and partly panneled Double / single leaf Aluminium door with necessary frame using standard anodized powder coated sections of JINDAL, HINDALCO make as detailed below all of approved make.(Including necessary screws,fasteners,cleats,rods etc.Specification for each shutter :-a) Bottom members -97.30 x 44.45x 2.15mm b) Top members - 47.62x44.45x1.95mm c) Side member - 47.62 x 44.45 x 1.82mm d) Middle member - 49.91 x 44.45 x 1.60mm; Door member of SL NO19566 of JINDAL e) 12mm thick pre laminated twin finish exterior grade of Novapan MFPB (PTX) - Superior grade or TESA / ASIS / ARCHIDPLY or any other particle board having ISI Mark or 12mm thick both side finished MDF boards f) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN make g) Rubber gaskets - Good quality of approved make h) Glazing clips - Weight of 0.097Kg/RM. I) Aluminium hinges 125mm long - 3Nos j) Aluminium handle 150mm long - 2 Nos. k) Concealed lock of make godrej/sheel 4 lever l) Aluminium tower bolts 200mm long - 2 Nos. m)Miscellaneous -Al. cleats, screws ,Door sealant,PVC push/pull stickers on glass. etc

Providing and erecting partly glazed and partly panelled powder coated Aluminium partition (low height/full height) using standard sections of JINDAL or HINDALCO so that each pannel shall not exceed 1.20 sqm with 12mm thick pre-laminated board having twin finish of Novopan / TESA in bottom rows and 5mm thick float glass of MODI / ST GOBAIN on middle and top rows including glazing clips, rubber gasket for fixing the glass, filling gaps with silicon sealant etc. Aluminium members to be extended and fixed upto slab. Specification for aluminum sections to be used is a) Bottom members- 95.25 x 44.45 x 2.00mm is partition is erected from ground level b) Top / vertical members - 63.50 x 38.10 x1.95mm c)Middle memebers - 63.50 x 38.10 x 1.95mm

HAL/SLRDC/CE/T/25-26/2

HAL/SLRDC/CE/T/25-26/2

Civil works for upgradation of ACS235 and DATALINK Lab in SLRDC HAL factory area, Hyderabad.

Description

Name of the Individual / Firm / Company: * Mandatory

Type of ownership

Details of Constitution or Legal Status such as certificate of incorporation, shops and establishments, Contractor registration No etc.,

Address for correspondence:

GST NO.:

PAN No.:

Contact details

Please Enter Contact person Name

Pls Enter Mobile No

Average annual financial turn over during the last 3 years, ending financial year 2023 [ should not be less than 30% of Amount put to tender]. Turnover for 3 years are compulsory.

TURN OVER IN Rupees

Pls Enter Turn over in Rs. for all the 3 years

ESI & PF Nos with proof (If any)

Related Document to be Uploaded to e-Procurement Portal

Bank(s) details: [Copy of the cheque leaf to be uploaded]

Related Document to be Uploaded to eProcurement Portal (Note Canceled cheque leaf to be uploaded)

Latest Bankers Solvency Certificate from Nationalized/ scheduled Bank issued NOT before 12 months from the date of Tender submission.

Pls Enter Details to 'Name of the Bank' , 'Date of Issue','Value in Rs

Experience of having successfully completed similar works during last 7 years ending last day of month previous to the one in which applications are invited. [Latest work experience certificate may be uploaded] (i) THREE similar completed works each costing not less than the amount equal to 40% of the estimated cost. (ii) TWO similar completed works each costing not less than the amount equal to 50% of the estimated cost. (iii) ONE similar completed work each costing not less than the amount equal to 80% of Amount put to the tender.

80% (One Work)

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Please enter Details for Work No 1

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No II

work done

Type of Work: [ Incase of private works the same shall be supported with TDS certificate]

Pls Enter Details for Work No III

Details of person holding the power of Attorney (If different from contact person)

Related Document to be Uploaded to eProcurement Portal

Pls Enter Details for Person holding Power of Attorney

DECLARATION I

Pls Accept The Delarication

DECLARATION II

Pls Accept the Delaration II