SPECIAL REPAIR TO COMPOUND WALL AND GATE, HARDSTANDING AND SEWAGE SYSTEM AT BLDG NO 4/2 AND BLDG NO 4 AND 4A, 983 FPO AND OTHER MINOR WORKS UNDER GE(SOUTH) BANGALORE

Amount

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level), and removing debris outside MD land complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:4:8 type D2 (40mm graded stone aggregate) as in sub base floors etc complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block with grey cement and no pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed.

M&L for sand filling under floors or in foundations including watering and consolidations etc complete all as specified and directed.

M&L for colour chequered cement concrete tiles with grey cement and pigment 30cmx30cmx25 mm thick set jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed or bedding layer of mortar 1:6 for laying floor finishes complete all as specified and directed.

Demolition /breaking of drain pipes of any description set in CM 100 mm and disposing completed all as specified and directed.

Demolition /breaking of drain pipes of any description set in CM 150 mm and disposing completed all as specified and directed.

Demolition /breaking of drain pipes of any description set in CM 200 mm and disposing completed all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (40 mm graded stone aggregate) as in foundations, filling & mass concrete complete all as specified and directed.

M&L for providing cement concrete type C1, 1:3:6 ( 20 mm graded agg)as in coping, bed plates for angle iron etc completed all as specified and directed.

M&L for rendering 10 mm thick on fair face of brick surface or concrete surfaces finished even and smooth without using extra cement in cm 1:4 completed all as specified and directed.

M&L salt glazed stoneware drain pipes laid in trenches 200mm dia and jointed completed all as specified and directed.

M&L salt glazed stoneware drain pipes laid in trenches 150mm dia and jointed completed all as specified and directed.

M&L salt glazed stoneware drain pipes laid in trenches 100mm dia and jointedcompleted all as specified and directed.

M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing under haunching against sides for 200 mm dia pipe completed all as specified and directed.

M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing under haunching against sides for 100 mm dia pipe completed all as specified and directed.

M&L concrete ( 1 : 3 : 6) type C-2 to drain pipes including packing under haunching against sides for 150 mm dia pipe completed all as specified and directed.

M&L Pre cast RCC (1:2:4) type B1 for cover slab for man holes and set in cement mortar 1:4 completed all as specified and directed.

Demolition of brickwork or stone boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

Excavation in trenches n exc 1.5 m wide & n exc 1.5 m depth; for foundation etc and getting out in hard/dense soil complete all as specified and directed.

Blank

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in foundation, incl rafts, footings, foundation beams, plinth beams, bases for columns etc, basement slabs under reamed piles and mass concrete complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed.

M & L for Reinforced cement concrete M-25 design mix (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed.

M&L for rough finished formwork to sides of flat concrete foundations, footings, based of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter complete all as specified and directed.

M&L for Square/ Rectangular formwork to sides of pillars, posts, struts, piers, columns and stanchions etc rough finished surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc rough finished surface complete all as specified and directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 5mm dia and over upto and incl 10 mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for in stirrups, spaces and binders and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Precast cement concrete type C1 1:3:6 block masonary with solid blocks exc 10cm in width & setting in CM 1:6 complete all as specified and directed.

M &L for providing cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil complete all as specified and directed.

Removing excavated material (soil) exc 250 m but n.exc 500 m and depositing where directed.

S&F mild steel hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including securing bolts, posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc., flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting for riveting etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S & F galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossings with and provion of galvanised mild steel wire, staples or steel pin etc including dismantling the existing barbed wire, etc complete all as speecified and directed. Note:- Each line of wire shall be measured and paid.

M&L for preparation of new or previously untreated steel or iron surfaces exc. 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater ventilating pipes, incl bolts If rewd hooks (stay) heavy, for large gates hook and pintle hinges, heavy for large hasps and staples chains hand made sliding bolts clamps, plate washers and similar small articles confirming to Fe-290, Gde-E-165 complete all as specified and directed.

S&F 1.25 mm mild steel, plain,any colour sheet in wall cladding, steel gates and similar work, cut to size holes punched, incl round headedscrews, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, incl bending or turning up, mitred angles etc as required complete all as specified and directed.

S&F framed work as in gates of ornamental and intricate design including pintle hinges, stops, hand made sliding bolt , with gusset plates, rail, braces etc. complete drilled for fixing of steel sheeting or other covering and structural steel is painted one shop coat of zink chromate primer paint (including prep) complete all as specified and directed. Note : 1. All ornamental items like Bhala or any other fittings & fixturers used in gate shall be measured as per actual weight. 2. Design of gate shall be made as approved by GE.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Removing building materials to a distance of exc. 1.0 Km but not exc. 5.0 Km (1 Metric tonne = 1 Load and One Cum = 1735 Kgs) out side MD Land Complete all as specified and directed.

M &L providing cement concrete 1:3:6 type C-1 (using 20 mm graded crushed stone aggregate) in lintel upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, stringcourses lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones bed plates,kerbs incl weathering slightly rounded or chemfered angles and throating complete all as specified and directed.

M&L 100 mm thick cement concrete type D-2 1:4:8 (using 40 mm graded crushed stone aggregate), as in sub base of floors complete all as specified and directed.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L rendering 10mm thick in Cm 1:6 on bricksurfaces finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces mixed with integral water proofing compound as per manufacturer's instructions, surfaces finished even and smooth without using extra cement complete all as specified and directed . (Note :- Water proofing compound shall be measured and paid for separately as supply only under relevant item of this schedule).

Supply only integral wate proofing compound ISI Marked as approved, all as specified and as directed.

M&L preparation of newly plastered surfaces of wall and applying two coats of distemper oil emulsion white or tint with priming platered and other surfaces incl 1 mm thick wall care putty on plastered surface complete all as specified.

M&L for preparation ol new plastered surfaces of walls Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

S&F second class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chemfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F second class hard wood 30 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F factory made 35 mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F Powder Coated aluminium frame for, frame work, partions doors, windows, ventilators and aluminium grills for windows etc, with one or more rebates icludig joinning cleat for rebates including joining cleats for fixing etc, complete all as specified & directed .

S&F Powder Coated three track sliding aluminium windows, with wire mesh and 4.0 mm thick glazing of aluminium shutters incl necessary joining cleats, glazing clips, rubber packing, locking clips powder coated aluminium snap beading, locking arrangements and screws complete all as specified and directed.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete , complete all as specified and directed.

S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sqm in each pane complete all as specified and directed.

S&F stainless steel 100 mm butt hinges for doors complete all as specified.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodized complete all as specified and directed.

S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed.

Supply and fix 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and directed.

S&F 150 mm long floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed..

M&L preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified.

M&L preparation of Old steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enemel paint complete all as specified and directed.

S&F in repair Aluminium anodised tubular curtain rod 20 mm dia complete all as specified and directed.

S&F in repairs fancy type brass bracket with screws for wall corners 25 mm dia including wooden plugs complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls and applying One coat of Oil bound distemper including stopping of nail holes, filling of cracks, etc and cleaning all window panes from splashes / droppings, complete all as specified and directed.

M&L for Preparation of Old surfaces of wall and Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 1.67 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc, incl raking out joints, hacking for key scrubbing down with water, etc.

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing servicieable tiles to store and rubbish off the premises.

M&L 40 mm thick cement concrete type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate), as in sub base of floors.

S&F coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 15 mm thick screed bed in cement mortar 1:6.

S&F colour Glazed ceramic tile in verticle surface area exc 0.06 sqm but n.exc 0.12 sqm set over 10 mm thick rendering on fair faces of brick work or concrete surfaces as backing coat in cement mortar 1:4. and jointed in neat cement slurry and pointed in white cement

M&L 20mm thick granite (of any type) work (table, rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) incl pointing in white cement (1:2) using mable dust with admixture of pigments to match with shade o granite

M &L Rounding to edges of stone slabs one edge,such as in steps, cooking platform, and other similar situations

M & L for applying two coats of Oil bound distemper on newly plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .

M & L for applying two coats of Oil bound distemper on old plastered surfaces incl preparing the surfaces and applying one coat of alkali resistant priming paint complete all as specified and directed .

Cutting chases stone, concrete block wall , pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10cm girth

S & F of CPVC pipes 20mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of pipe of 15 mm GI pipe complete all as specified.

S&F of 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F of 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F of 20 mm dia male brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia female brass threaded adapter complete all as specified and as directed.

S&F of 20 mm dia CPVC Union complete all as specified and as directed.

S&F sink with drainage board made of stainless steel 1 mm thick, kitchen or laboratory, with plugs, washers and wastes coupling, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x460mm bowl size 410mm x 330mm x 160mm (minimum), including PVC waste pipe 32 mm dia complete all as specified and directed.

S&F Bib tap cast copper alloy 20mm fancy type , Chromium plated screwed down, high pressure, with capstan head , screwed down screwed for iron pipe.

S&F stop valves 20 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with Capston head, screwed both ends for iron/CPVC pipes or for unions complete, all as specified and directed .

S&F steel windows with side hung shutters including projecting type hinges with steel handle of size 100mm, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal ida of wire and average width of aperature 1.18 mm and fixed with tinned tacks, or galvanised wire staples.

S&F 2nd class hard wood plain fillets, Square or rectangular or triangular in section, clean sawn, planed on both sides secured with nails or beads , sectional area exc 3 Sqcm and not exc 6 Sqcm including two coats of synthetic enamel paint over a coat of pink wood primer complete all as specified.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exc 1.5 sqm etc complete all as specified and directed.

S&F 19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame work complete all as specified.

S&F 75 mm brass handles,cast type polished bright complete all as specified and directed.

S&F soft closing kitchen cabinet hinges, stainless steel, bright finish or electrogalvanised, of approved quality, complete all as specified and directed

S&F 100 mm long Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all specified.

S&F framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikers framed guard bars barred iron doors ladders; framed balusters walk ways railings framework of watertanks and similar work conforming to Fe-290 Gde-165.

M&L preparation of old painted surfaces of wood work and joinery exceeding 10 cm width or girth and applying one coat synthetic enamel paint all as specified

M&L preparation of old painted surfaces of steel and iron work exc 10 cm width or girth and applying one coat of synthetic enamel paint all as specified

M&L for rough finished formwork to sides of flat concrete foundations, footings, based of columns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work vertical or to batter.

M & L reinforced cement concrete nominal mix type B1 (1:2:4) (using 20 mm graded crushed stone aggregate) as in beams, cantilevers, bressummers, lintels over 1.5 m span..

S&F mild steel TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (anealed) not less than 0.9 mm dia or securing with clips.

M&L rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 incl finished even and smooth (without using extra cement).

Taking down copper / aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling rose, Pendants, regulators, sockets, light fittings etc removing materials to store for keeping in safe custody for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc

M & L point wiring concealed by using 1.5 Sqmm PVC insulated sheathed ,FRLS copper conductor multi stranded drawn in suitable sunken box and frame cover plate for mounting of modular switches / sockets as required at site and provn of PVC rigid non metallic conduit medium density ISI marked fixed with all fittings and all accessories complete including cutting chasing to the existing surface to conceal the conduit and making good to the disturbed surface to match with the existing surface provision of 1.5 Sqmm PVC insulated, FRLS copper conductor continuos earth wire connected to common earth dolly including complete all as specified and as directed. Note : MS sunken boxes, cover plates with frame switches, sockets shall be measured and paid separetely in an appropriate item of Sch 'A' and laying / fixing of sunken box and cover with frame is included in quoted rate.

(a) One light / fan point controlled by one switch / push button

(b) One 3 pin 5 Amps socket out let point on independent board.

All as per item no 106 above but with 4.00 Sqmm cable for one 3 pin 15Amps socket outlet point on independent board.

S & F ceiling rose surface bakelite 65 x 50mm 3 terminals all as specified and as directed.

M & L switch piano, flush type single pole one way 5 Amps all as specified and as directed.

M & L switch socket combination 2 in 1, 3 pin, 6Amps all as specified and as directed.

M & L switch socket combination 2 in 1, 3 pin, 6 Amps and 16Amps flush type all as specified and as directed.

S & F sheet metal enclosure single pole and neutral, 240 volts, 4 way double door with 200 Amps rated bus bar including taking down old unserviceable DB / Main switch board complete all as specified and as directed.

S & F in repair MCB SPN 32 Amps, 240 volts 'C' Curve complete all as specified and as directed.

S & F in repair MCB SP 5 to 32 Amps 240 volts 'C' curve complete all as specified and as directed.

S & F in repairs LED light fittings 4 feet, 20 watts, 220 V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete with all accessories all as specified and as directed.

S & F exhaust fan, steel body AC single Phase, 230V od size 380mm sweep with blades and frame and louvers complete including dismantling old fan and depositing to AGE E/M store yard and drilling hole in walls for fixing of exhaust fan of size 380mm and making good wall surfaces if required complete all as specified and as directed.

S S CONSTRUCTIONS

S L R Construction

M/S POTHIRAJ AND CO

SREE CONSTRUCTIONS

PRIYADARSHINI CONSTRUCTIONS

Sri Lakshmi Constructions

S.N.MANJUNATHA

yuvan constructions

docileworx