Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.3 LAccepted-AOC ARABINDANAGAR P O ALIPURDUAR COURT DIST ALIPURDUAR WEST BENGAL 736122 | ALIPURDUAR | ALIPURDUAR | WEST BENGAL | 736122 | ₹6.3 L | L1 | Accepted-AOC AOC |
| 2 | L2₹6.5 LRejected-Finance STATION ROAD P O DIST ALIPURDUAR PIN 736 121 | ALIPURDUAR | ALIPURDUAR | WEST BENGAL | 736121 | ₹6.5 L | L2 | Rejected-Finance Quoted Amount is more than the L1 Bidder |
| 3 | L3₹6.5 LRejected-Finance | ₹6.5 L | L3 | Rejected-Finance Quoted Amount is more than the L1 Bidder |
| 4 | L4₹6.5 LRejected-Finance | ₹6.5 L | L4 | Rejected-Finance Quoted Amount is more than the L1 Bidder |
Tender Value
₹6.3 L
EMD Value
₹12,655
Closing Date
7 Mar 2026, 4:00 pmClosed
EE/PWD/APD/DIVN
EE/PWD/APD/DIVN
Urgent patch repairing work from 11.50 KM to 12.50 Km and 18.00Km to over 19.00Km Alipurduar Volka Road Under Alipurduar Division , PWD
2026_WBPWD_1016265_1
WBPWD/EE/APDD/NIET 23 of 2025-26
Open Tender
CIVIL WORKS
15 days
Alipurduar
Please refer Tender documents.
3 documents required · 3 mandatory
₹12,655
Yes
15 Mar 2026
28 Feb 2026
9 Mar 2026
28 Feb 2026
7 Mar 2026
28 Feb 2026
Providing, laying, spreading and compacting stoneaggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening / binding materials to fill up the interstices of coarse aggregate, watering including lighting, guarding, barricading and making necessary earthen bundh of one metre width on each side and preparing the bed by necessary cutting or filling, including cost of all materials and hire and labour charges of all men and machinery and compacting to the required density, as per Clause 404 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). Grading-II Aggregate (53 mm to 22.4 mm) Using Stone Screening Type B (11.2 mm) Manual Means Pakur Variety
Repairing pot-holes and making up small depressions with ramming or power rolling including screening, cleaning chips or metals and washing, drying as necessary and heating the chips or metal where necessary, cutting pot holes to regular shapes with vertical edges, cleaning the disintegrated materials, heating matrix and applying tack coat (including sides), finishing the top of repaired surface levelled with adjoining area, including cost and carriage of stone aggregates and matrix, excluding cost of applying tack coat. [Tack coat is to be considered separately] i) With premixed Pakur Chips with 54 kg of bitumen per m3 of loose net volume of stone chips using concrete mixer machine. (The payment is to be made on the basis of loose netvolume of stone materials consumed in the work) (b) Using Mobile HMP (Light duty) Pakur Variety
Open-Graded Premix Surfacing using Bituminous (Viscosity grade Paving Bitumen / Modified bitumen) Binder and Mobile Hot Mix Plant (Light Duty) Providing, laying and rolling of Open - graded premix surfacing of 20 mm thickness composed of 13.2 mm (@ 0.018 m³ per m²) and 11.2 mm (@ 0.009 m³ per m²) size stone aggregates, including thoroughly cleaning of the surface, screening, cleaning and pre-heating stone chips and fully pre-coating the same either using viscosity grade paving bitumen or cut-back or emulsion, carrying the mixture by any suitable arrangements, laying the the hire charges of Mobile Hot Mix Plant (Light Duty) and other machinery, pay of operators, cost of fuel and lubricants etc. complete to be followed by seal coat of either Type A or Type B as per Technical Specification Clause 508 for Rural Roads of MORD Add cost & carriages of materials as per requirement vide Table 3.3-1 of Section 3 to get the final consolidated rate. Pakur Variety
Providing and laying Premixed Seal Coat (Type B) with approved quality sand/grit @ 0.6 m3/ 100 m2 and bitumen binder on thoroughly cleaned black top surface coated with tack coat, including heating and mixing cleaned sand/grit (100 % passing through 2.36 mm sieve and retained on 180 micron sieve) uniformly with bitumen binder, laying and spreading the mix at an uniform rate using suitable means, brushing the surface, if necessary, to ensure+B16uniformity, followed by rolling with power roller including the cost and carriage of l and lubricants, including hire charges of machineries, tools & plants required for construction and quality control complete as per Clause 511 of Specifications for Road & Bridge Works of MoRT&H (5th Revision).. II By Manual Means With Hot Bitumen Binder (@ 6.80 kg / 10 sqm.) Pakur Variety
Providing and applying primer coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 and requisite quantity on prepared surface of granular base including cleaning of road surface and spraying primer using Mechanical means including cost and carriage of bitumen emulsion and all other incidental costs of work complete as per Clause 502 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) For WBM / WMM Surface: (with primer @ 0.70-1.0 kg/sqm)
Providing and applying tack coat with Cationic Bitumen Emulsion of approved grade conforming to IS: 8887-1978 on the prepared surface cleaned with Hydraulic broom, moistening the surface including cost and carriage of emulsion, hire charges of machinery and labour, cost of fuel and lubricants all complete as per Clause 503 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) On Bituminous Surface (Using Bitumen Emulsion (MS) at the rate of 0.25 kg per sqm.)
Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision) Using River Bed Material (North Bengal Variety)
Dressing and chilchalling Road flanks including cutting and filling with earth up to 150 mm average thickness finished with outward cross-grade of 1 in 30.
Add GST @ 18.00% on sum of item from Sl 1 to Sl 8
Add Wel fare cess @ 1.00% on sum of item from Sl 1 to Sl 9
Please Enable Macros to View BoQ information
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.38 MB
Tendernotice_2.pdf
PDF • 1.84 MB
BOQ_2496588.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid