REPAIRS TO KITCHEN, BATH, WC AND CONNECTED WORKS INCLUDING SERVICE WATER TANKS AT PONDA UNDER GE PANAJI, GOA.

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and disposing off the rubbish materials complete all as specified and directed.

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) complete all as specified and directed.

Taking up or down GI Steel water tubing 20mm bore and connections including fittings from floor/walls/ ceiling complete all as specified and directed.

Taking up or down GI steel water tubing 15mm bore and connections including fittings from floor/walls/ ceiling complete all as specified and directed.

Material and labour for 75mm thick cement concrete 1:4:8 type D-2, using 40mm graded crushed trap stone aggregate as in sub base of floor complete all as specified and directed.

Material and labour for rendering 10mm thick in cement mortar 1:3 on surface of concrete, junction of wall/ sunken portion of slab mixed with water proofing compound, finishing the surface even and smooth without using extra cement including preparation of old RCC surface by thoroughly cleaning and grouting with cement slurry mixed with water proofing compound complete all as specified and as directed. Note: - Water proofing compound will be measured and paid for separately.

Supply only integral water proofing compound (ISI marked) complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed in repairs with aluminium wire staples fixed in repairs complete all as specified and as directed.

Material and labour for applying two coat of white wash on old decorated surfaces of walls and cornices including brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc complete all as specified and as directed.

Material and labour for applying one coat of white wash on old decorated surfaces of ceiling including brooming, scrapping down with steel scrapper smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots etc complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on old painted steel surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material and labour for glazed ceramic coloured tiles of size 300mm x 200mm x 6-7mm thick in vertical surface, set and jointed in neat cement slurry and pointed in coloured cement to match the tile surface laid over and including rendering 10mm thick backing coat in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brickwork complete all as specified and as directed.

Material and labour for non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06Sqm but not exceeding 0.11Sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tile surface laid over and including 15mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed

Supply and fix vitreous china squatting pan ‘Orissa’ pattern, of size 580mm x 440 mm white, with integral foot rest and ‘P’ or ‘S’ trap, connection to trap and to flushing pipe, front or back inlet including trap set in concrete and taking out old WC and connections etc complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) WC connector with lip ring complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls or laid in floors complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) bends of any radius provided with access door complete all as specified and as directed.

Supply and fix 75mm bore PVC (SWR) bends of any radius provided with access door complete all as specified and as directed.

Supply and fix brass chromium plated shower rose of size 125mm with shower arm 15mm dia and 195mm long with bend fixed in repairs complete all as specified and as directed.

Material and labour for concrete bed to drain pipes of 110mm bore including packing under, and haunching against the sides of pipes after they are laid and tested; in plain cement concrete 1:4:8, type D-2 using 40 mm graded aggregate complete all as specified and directed. Note: (i) Thickness of bed below the barrel of pipes shall be 10cm. (ii) Width of bed shall be outer diameter of drain pipes (not of sockets/ collars) plus 30 cm.

Material and labour for 20mm thick machine cut granite slab (of any type) laid over and including 15mm thick screed bed or bedding layer of cement mortar 1:6, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and as directed.

Supply and fix 20mm bore galvanised steel water tubing medium grade with all fittings and fixed to walls and ceiling or laid in floors complete all as specified and as directed.

Supply and fix 15mm bore galvanised steel water tubing medium grade with all fittings and fixed concealed including cutting chases to brick wall/ ceiling or laid in floors and making good surface in cement mortar complete all as specified and as directed.

Supply and fix 15 mm bore fancy type, brass chromium plated stop valves, screwed down high pressure, with capstan heads, screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and as directed.

Supply and fix 15 mm bore fancy type, chromium plated stop valves (concealed type), cast copper alloy, screwed down high pressure, with capstan heads, screwed both ends for iron pipe or for unions fixed in repairs complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail, 20mm dia, 60cm long between flanges fixed to plugs with brackets fixed to walls in repairs complete all as specified and as directed.

Supply and fix soap dish brass chromium plated, round or oval shape, overall size 100mm or its next higher size available, fixed in repairs to wall/ dado complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm fixed in repairs complete all as specified and as directed.

Supply and fix grating doom 100mm dia of PTMT (Minimum weight 25gms) fixed in repairs complete all as specified and as directed.

Supply and fix cast iron nahani trap of 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B-1, 1:2:4 using 20mm graded aggregate fixed in repairs complete all as specified and as directed.

Material and labour for salt glazed stoneware gully trap, square or round mouthed, type ‘P’ of size 100mm x 100mm complete all as specified and as directed.

Supply and fix vitreous china wash hand basin, white flat back of size 580mm x 450mm excluding taps, waste chain but including providing and fixing CI brackets complete all as specified and as directed.

Supply and fix waste fitting of 32mm, brass chromium plated for glazed ware basins with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Supply and fix 15mm dia pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.

Supply and fix 10 litres capacity PVC valveless, syphonic action type, flushing cistern, high level, white, with inlet, ball valve, float and handle including brackets and PVC high density flush pipe of 32mm dia with rubber cones for high level cistern fixed in repairs complete all as specified and as directed.

Supply and fix 3mm thick plain sheet glass, ordinary quality and glazing with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix 3mm thick figured glass, pin head type and glazing with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm and bowl size 410mm x 330mm x 160mm complete fixed in repairs all as specified and as directed.

Supply and fix 15 mm dia fancy type bib taps chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair complete all as specified and as directed.

Material and labour for cleaning and removing all scale and dirt etc from water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs and from mouth of circulating pipes etc complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) not exceeding 1.5 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frame) exceeding 1.5 Sqm and not exceeding 4.00 Sqm each complete all as specified and as directed.

Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube supplying and fixing in opening as per specification and drawing in SSR part II 2004 complete all as specified and as directed.

Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock and bottom rail on either side as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing drawing in SSR part II 2004 complete all as specified and as directed.

Cutting holes in brick walls built in cement mortar for inserting hold fasts depth of embedded portion of hold fast not exceeding half brick and making good the dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 complete all as specified and as directed.

Supply and fix 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

Supply and fix 100mm long stainless steel butt hinges complete all as specified and as directed.

Supply and fix 150 mm long extruded aluminium alloy handle fabricated type, anodised complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed in repair complete all as specified and as directed.

Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with oil putty or fixed with beads complete all as specified and as directed.

Supply and fix 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square not exceeding 0.5 Sqm each pane complete all as specified and directed.

Supply and fix 3mm thick figured glass pin head type glazed with oil putty or fixed with beads in square not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of pink primer on new or previously untreated wooden surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material and labour for applying two coats of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on old steel surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and as directed.

Material and labour for applying one coat of synthetic enamel paint on old painted wood based surfaces of any description not otherwise described, over 10cm width or girth including preparation of surfaces complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings etc. with ends of bars shouldered and or riveted or forged into spikes, frame guard bars and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Taking down cement or cement lime plaster of any description from stone/ brick or concrete surface of wall/ ceiling etc including racking out joints hacking for key scrubbing down with water complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:6 on stone wall surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:4 on stone wall surface finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for applying three coats of white wash including preparation of new plastered surfaces of wall complete all as specified and directed.

Material and labour for applying two coats of white (lime) wash including preparation of plastered or un plastered old decorated surfaces of walls, cornices, pilasters, etc. by brooming down or steel wire brushing; scraping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots, etc. complete all as specified and directed .

Material and labour for applying one coat of white (lime) wash including preparation of plastered or un plastered old decorated surfaces of ceiling, by brooming down or steel wire brushing; scraping down smoke soot, moulds, moss, efflorescent salts, trading oil and greasy spots, etc. complete all as specified and directed .

Dismantling of water tanks of capacity not exceeding 250 litres and removing from site complete all as specified and as directed.

Supply and fix 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

Supply and fix 25mm bore brass ball valve high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball screwed for iron pipe and fixed to bore dia of pipe 25mm complete all as specified and as directed.

Supply and fix 25mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs complete all as specified and as directed.

Taking up or down GI steel water tubing 25mm bore and connections including fittings from floor/ walls/ ceiling complete all as specified and as directed.

Supply and fix 25 mm dia galvanised iron steel water tubing medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as specified and as directed.

Raja Enterprises