Fabrication, Supplying, Fitting, Fixing of three nos. of H/R gate (Size 4.90m x 1.35m), one no. U/S gate (Size 3m x 4m), nine nos. Falling shutter with tie rod, peg and khutti, renovation of railing and shades of U/S & H/R gate hoisting platform at Kachna Weir under Irrigation Div.-Nawada, Annual maintenance (Oiling & Greasing) of gates & hoisting system under Irrigation Mechanical Sub Division, Jhaja. And Fabrication, Supplying, Fitting, Fixing of two nos. canal gate with Groove channel, Hoisting Platform and Hoisting System at Dholkatwa under Nakti Irrigation Scheme under Irrigation Division, Jhajha.

Short e-NIT NO.- 4 / 2026-27 Group-3 TECHNICAL BID

Name of Work Fabrication, Supplying, Fitting, Fixing of three nos. of H/R gate (Size 4.90m x 1.35m), one no. U/S gate (Size 3m x 4m), nine nos. Falling shutter with tie rod, peg and khutti, renovation of railing and shades of U/S & H/R gate hoisting platform at Kachna Weir under Irrigation Div.-Nawada, Annual maintenance (Oiling & Greasing) of gates & hoisting system under Irrigation Mechanical Sub Division, Jhaja. And Fabrication, Supplying, Fitting, Fixing of two nos. canal gate with Groove channel, Hoisting Platform and Hoisting System at Dholkatwa under Nakti Irrigation Scheme under Irrigation Division, Jhajha. Cost of Work as per BOQ Rs. 27,49,599 Time of Completion 25 Days

Sl No. Items Requirement

Name of Contractor

Address of the Contractor

1 Earnest Money (A) Bank Guarantee Amount to be entered ( In Rs.)

(B) Internet Payment Gateway (Credit/Debit Card ) , Net Banking , NEFT/RTGS Amount to be entered ( In Rs.)

Bid Security Amount - ( in Rupee) Rs. 55,000

2 Registration (Class-III)

5 PAN Card . No.

6 Factory License

7 Workshop certificate

8 List of Techanical Staffs

9 List of Machineries available in workshop

10 Bid Validity 120 days

11 NOC for Debar & Black Listing Affidavit

13 Character Certificate

14 Any other relevant document (If any)

Executive Engineer I.M.D. Bounsi

Name of Work:- Fabrication, Supplying, Fitting, Fixing of three nos. of H/R gate (Size 4.90m x 1.35m), one no. U/S gate (Size 3m x 4m), nine nos. Falling shutter with tie rod, peg and khutti, renovation of railing and shades of U/S & H/R gate hoisting platform at Kachna Weir under Irrigation Div.-Nawada, Annual maintenance (Oiling & Greasing) of gates & hoisting system under Irrigation Mechanical Sub Division, Jhaja. And Fabrication, Supplying, Fitting, Fixing of two nos. canal gate with Groove channel, Hoisting Platform and Hoisting System at Dholkatwa under Nakti Irrigation Scheme under Irrigation Division, Jhajha.

UNDER HEAD 2700

ESTIMATED COST:- RS. 27,49,599

EARNEST MONEY:- RS. 55,000

COST OF BOQ:- RS. 5000

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Extraction of old gate by crane or jugar or any other mechanical means and Cleaning of site before and after completion of work 4 Each 1831 7324.00

2 Fabrication, supplying, fitting, erection of three nos vertical lift H/R gate of size 4.90m X 1.35m consisting of 8mm thick skin plate, ISMB 250 as top horizontal girder, ISMC 250 as bottom horizontal girder, two nos. End vertical frame of ISMC 250, two nos. ISMB 250 as horizontal girder and 4nos. ISMB150 as vertical stiffener. ISA 100X100X10 for fixing guide roller and 8nos. roller each gate of outer dia 90mm and inner dia 20mm and width 105mm along with roller pin and all accessories for H/R gates including all cost of materials, labour, welding, machinery, finishing, cleaning applying two coats of zinc chromate red oxide primer and three coats of approved epoxy paints including required civil work etc. as per specification and direction of E/I. Area of one gate = 6.615m2 For 3nos. gate = 6.615m2 X3 = 19.845 m2 19.845 Per m2 36444 723231.18

3 Fabrication, supplying, fitting, erection of one no. vertical lift U/S gate of size 3 m X 4 m consisting of 8mm thick skin plate, ISMB 250 as top horizontal girder , ISMC 250 as bottom horizontal girder , two nos. ISMC250 as end vertical stiffner , three nos. ISMB 150 as vertical stiffner and 4nos. ISMB250 as horizontal girder and ISA 100X100X10 for fixing guide roller and 8nos. roller each gate of outer dia 90mm and inner dia 20mm and width 105mm along with roller pin and all accessories for U/S gates including all cost of materials, labour, welding, machinery, finishing, cleaning applying two coats of zinc chromate red oxide primer and three coats of approved epoxy paints including required civil work etc. as per specification and direction of E/I. Area = 12m2 12 per m2 30902 370824.00

4 Supplying fitting fixing of flat rubber seal in bottom portion of U/S gate and H/R gate for leak proofing with 60X 8 M.S flat and all complete work as per specification and directions of E/I. 1nos. X 3 m + 4.9mX 3nos. = 17.7 m 17.7 Per m 1525 26992.50

5 Supplying fitting & fixing of 16 mm diameter wire rope for lifting gate as per specification 15m X 3 nos (H/R gate) = 45m 45 Per m 466 20970.00

6 Supplying fitting & fixing of 20 mm diameter wire rope for lifting gate as per specification Supplying fitting & fixing of 20 mm diameter wire rope for lifting gate as per specification 20m X 1 nos (U/S gate) = 20 m 20 Per m 825 16500.00

7 Fabrication, supplying, fitting, erection of supporting structure in H/R gate of Kachna weir by embedding channel made of ISMC-250 having an angle ISA-65 mounted over it & bolted by 30 no’s of 16 x60mm bolts and nuts and all complete jobs as per specification and direction of E/I. 3 Per gate 32864.97 98594.91 c

8 Fabrication/ Supplying/ Fixing of angles in the window of Shed over H/R gate hoist platform to block its opening, fastening of loose Corrugated sheet of shed with all necessary clamps, hooks and other accessories as per directions and specifications of E/I. 1 Per unit 8777.69 8777.69

9 Fabrication/ Supplying/ Fitting/ Fixing of Chequered plate, Vertical post & Railing made of ISA 50X50X6 over U/S hoisting platform with all complete jobs as per specification and direction of E/I. 1 Per unit 148310.39 148310.39

10 Fabrication/ Supplying/ Fixing of Shade over U/S gate hoist platform of size 3.2m X13m from all four sides made of Corrugated sheet with MS flat 60X8 with all necessary clamps, hooks and other accessories as per directions and specifications of E/I. 28.83 Per m2 2138.72 61659.30

11 Fabrication/supplying/fitting/fixing of falling shutter of size 2.45m X 1m consisting of 3.15mm skin plate & ISA 65 angle with all accessories including cost of material, labour, machineries, cutting, welding, finishing, fixing and all complete work as per specification and directions of E/I. No of falling shutters = 9 nos 9 Each 22340 201060.00

12 Fabrication/supplying/fitting/fixing of tie rod 4’2’’ long made of 25mm dia of MS rod, with MS flat 50X6 at one end to fix with khutti along with nuts & bolts with all accessories including cost of material, labour, machineries, cutting, welding, finishing, fixing and all complete work as per specification and directions of E/I. No of tie rods = 24 nos. 24 Each 1006 24144.00

13 Fabrication/ S/F/F of M.S. Flat 63 mm wide X16 mm thick and 300mm long of 25mm for fixing of tie rod at one end with all complete job as specification and direction of E/I. 18 Each 374 6732.00

14 Fabrication/ S/F/F of M.S. peg one each at upstream and downstream of crest falling shutter of size 0’8’’ long made of 25 mm dia M.S. rod for alignment of falling shutter and all complete jobs as per specification and directions of E/I. Total = 9 shutter X 4 nos. = 36 nos. 36 Each 173 6228.00

15 Providing and laying P.C.C or R.C.C. with nominal mix of (1:1.5:3) in various components of Barrage foundation with approved quality of gravel coarse aggregate of required grades as per design and approved quality sand of requisite F.M washed and screened excluding cost of shuttering or form work as well as reinforcement its cutting, bending, binding, and placing but including necessary tools and plants, vibrating, curing royalty etc. complete job as per specifications and direction of E/I. (S.O.R WRD = 6.3.4) 1.83 Per m3 7106.23 13004.40

16 Providing Shuttering including strutting Propping etc. and its removal after use in superstructure portion of various components of dam work as per specifications and directions of E/I (WRD 6.3.21) 7.5 Per m2 585.96 4394.70

17 Carraige of materials

(i) Cement lead 8 kms (Sur.) 0.768 Per MT 554.6 425.93

(ii)Coarse Sand lead 12km (10km Sur. + 2km Unsur.) 0.768 Per cum 897 688.90

(iii)Stone chips lead 25 km (20 km Sur. + 5 km (Unsur.) 1.57 Per cum 2979 4677.03

Annual Maintenance (Oiling Greasing) under irrigation Mechanical Sub Division Jhajha (Section- Garhi & Darkha)

S.NO. ITEM OF WORK QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Overhauling, oiling , Greasing for hoisting arrangement, cleaning and washing of screw rod , wire rope , gear, pinion with HSD/K oil replacing damaged and refitting still ball and resetting the same for smooth working of gate including carriage material and C.P. as per direction of E/I.

A All type and size of Checknut, screw rod, hoisting arrangement 13 each 971 12623

B For speed reduction with counter weight and rope drum attached hoisting arrangement 16 each 5495 87920

C For winch crab with wire rope attached hoisting arrangement 14 each 1803 25242

Annual Maintenance (Oiling Greasing) under irrigation Mechanical Sub Division Jhajha (Section- Jhajha)

S.NO. ITEM OF WORK QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Overhauling, oiling , Greasing for hoisting arrangement, cleaning and washing of screw rod , wire rope , gear, pinion with HSD/K oil replacing damaged and refitting still ball and resetting the same for smooth working of gate including carriage material and C.P. as per direction of E/I.

A All type and size of Checknut, screw rod, hoisting arrangement 35 each 971 33985

DHOLKATWA, I.D -JHAJHA

S.NO. MATERIAL DISCRIPTION QUANTITY UNIT. RATE(RS.) AMOUNT(RS.)

1 Extracting old gate and Hoisting Platform by crane or chain pulley for repairing work with all tools & tackles supported by mechanical device with all labour and material complete job as per specification & direction of E/I. 2 Each 1831 3662

2 Fabrication/Supplying/Fitting/Fixing/Installation of Vertical lift gate (Size 1.5mX1.4m) with 8mm thick skin plate and ISMC100 as End Frame Vertical Stiffner and Horizontal Girder and ISMC 100 for Top horizontal girder and Bottom horizontal Girder with all complete jobs as per specification and Directions of E/I Area = 2nosx2.1 m2= 4.2 m2 4.2 Per m2 23486.19 98,642.00

3 Fabrication/Supplying/Fitting/Fixing/Installation of Fabricated Groove channel for two gates made up of 10mm thick MS plate of length 3.2m on each side with SS plate on channel and 16mm dia. MS rods for anchoring with all complete jobs and materials as per specifications and directions of E/I . 15 Per m 5889.2 88,338.00

4 Fabrication /Supplying/Fitting /Fixing of 63mm MS Screw Rod for C/R Gate with all material & labour and all complete jobs as per directions and specification of E/I. Length = 2.5m X 2 No's = 5m 5 Per m 4569.5 22,847.50

5 Fabrication /Erection of C.I. hexagonal checknut of 63mm dia. for C/R gates with internal G.M. bush fitted with Checknut including M.S. base plate with all materials & labour and all complete jobs as per directions and specifications of E/I. 2 Each 27097 54,194.00

6 Fabrication/Supplying/Fitting/Fixing of Hoisting Platform of C/R gate in Dholkatwa of Nakti Dam Canal System ISMB 250 for Top Runner and 6mm Chequered plate, ISMC 100 for Framing of platform from all sides and intermediate framing support with railing posts of ISA65X65X6 with all complete jobs as per directions and specifications of E/I. Area= 4.5 m2 4.5 Per m2 26452.52 119,036.34

7 Providing & laying P.C.C M-200 with nominal mix of (1:1.5:3) in foundation of various components of canal or embankment structures with approved quality of graded coarse aggregate of required grade ( as per design) and approved quality of sand of requisite F.M. washed and screened including necessary tools and plants, vibrating , curing, royalty etc. excluding cost of form work as well as reinforcement, its cutting, bending, binding and placing complete job as per specification and direction of E/I.W.R. D 5.3.5 1.528 Per m3 7106.23 10,858.32

8 Carraige of materials

(i)Cement lead 10 kms 0.641 Per MT 554.6 355.50

(ii)Coarse Sand lead 20km 0.657 Per m3 894.11 587.43

(iii)Stone chips lead 20km 1.314 Per m3 2979.1 3,914.54

TOTAL WORK VALUE(Rs.) = Sum Total of part-A, Part-B(i), Part- B(ii) & Part-C = 2306744.55 I

Add Seignorage fees(Part-A & Part-C) = Rs. 194.14 + Rs. 162.44 = Rs. 356.58 II

Add 1% L. Cess of (I) = Rs. 23067.44 III

Total (I +II +III) = Rs. 2330168.57 IV

Add G.S.T. of (IV) = Rs. 419430.34 V

Total (IV + V)) = Rs. 2749598.91

Say Total Amount = Rs. 2749599.00

Executive Engineer Irrigation Mechanical Division Baunsi