WELCOME MAINTENANCE TO MD ACCN AT PRAKASH NAGAR, MOHAN NAGAR AND OFFRS QTR AREA AND CERTAIN REPAIR TO INTERNAL WIRING AND REPLACEMENT OF LIGHT FITTINGS UNDER WELCOME MAINTENANCE OF MD ACCN AT CHANDIPUR

Amount

NOTE (Applicable for all items) :- The bidders/contractors are advised to read tender document & all corrigendum / amendments and General conditions of contracts before entrying/quoting the rates. SCHEDULE 'A' PART-I (B/R WORK)

M/L for preparation of old decorated surfaces of walls plastered or unplastered including removing cornices, pilasters by brooming down to remove all dust, dirt and all loose scales and other foreign matter and smoke soot, moulds, moss and efflorescent salt, oil & grease spots by steel wire brushes or steel scrapers, etc and applying one coat of white wash to wall surfaces complete all as specified.

All as per Sl Item No. 1.001 above but on ceilings surfaces.

All as per Sl Item No. 1.001 above but one coat of distemper oil emulsion on walls suraces.

M/L for preparation of old decorated plastered / unplastered surfaces of walls and applying two coats of distemper oil emulsion completet all as specified.

M/L for complete removal of existing treatment of walls surfaces and applying two coat of distemper oil emulsion complete all as specified.

Preparation of old surfaces and applying one coat of synthetic enamel paint to wood and wood based surfaces of any description not otherwise described over 10cm width or girth.

Preparation of old painted surfaces of steel and applying one coat synthetic enamel paint to steel surfaces of any description not otherwise described over 10cm width or girth.

Taking down cement plaster any description and the like on brick or stone walls, etc including raking out joints,hacking for key, scrubbing down with water etc.

M&L for applying plaster of paris putty of 1 mm thick over plastered surfaces to prepare the surface even and smooth.

M&L for 15mm thick in CM 1:6 rendering on brick or concrete surfaces finished even and smooth without using extra cement on wall

M&L for 5 mm thick in CM 1:3 rendering on brick or concrete surfaces finished even and smooth without using extra cement on ceilings

M&L for three coats of white wash as in ceilings on newly plastered surfaces including preperation of surfaces complete.

M&L for prepartion of newly plastered surfaces and priming plastered surfaces with alkali resistant primer paint and applying two coats of oil bound distemper on walls over a coat of 3 mm thick wall care putty complete all as specified and as directed.

M/L for preparation of new plastered or unplastered wall surfaces and applying three coat of white wash complete.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises.

M & L for 15 mm thick screed bed or bedding layer of mortar in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 25 mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded aggregate as in floor finishes to receive tiles.

M&L for 10 mm thick rendering in CM 1:4 on brick or concrete surfaces as in backing coat to receive tile finish as in skirting and dados complete.

M&L for joint free non - skid coloured ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles.

All as per Sl Item No 1.019 above but as in vertical surfaces such as skirtings, dado, etc.

M&L for coloured ceramic tiles 7 to 8mm thick (square or rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles.

M&L Vitrified light shade tiles 10mm thick (Square or rectangular) polished, area of each tile not exc 0.36 Sqm in floors etc jointed in neat slurry and pointed in white or coloured cement to match the shade of tiles.

All as per Sl Item No 1.022 above but as in vertical surfaces such as skirtings, dado, etc.

M & L joint free glazed ceramic coloured tiles as in vertical surfaces 450 mm x 350 mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as directed.

S&F Galvanised steel water tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

S&F Galvanised steel water tubing 20 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

Fixing only galvanised steel water tubing 15 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

Fixing only galvanised steel water tubing 20 mm bore, medium grade with all fittings (such as bends, elbows, tees, short plugs and union etc.) and fixed complete (concealed) to wall/in chases and ceiling or laid in floors including fixing complete.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) area not exceeding 1.5 Sqm each complete all as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frame) area exceeding 1.5 Sqm and not exc 4 Sqm each complete all as directed.

Taking down shutters of any description area not exceeding 1 Sqm each each all as directed.

Taking down shutters of any description area exceeding 1 Sqm and not exc 2 Sqm each each all as directed.

M&L 2nd class Hard Wood plain, solid, straight chowkhats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as directed.

Plain Cement Concrete 1:3:6 (Nominal Mix) type C-1 using 20 mm graded stone aggregate in hold fast block, etc. including necessary form work complete all as specified and as directed.

Mild steel work as in bands, straps, supports or stays for RWP, ventilating pipes, clamps, hold fasts, wall ties conforming to Fe-290 Gde E-165

S&F 30 mm thick 2nd class hard wood glazed, gauged, skeleton shutter, as specified in SSR Part I, Section 8, clause 8.24 (b); supplied and fitted to chowkats open rebated and prepare to receive glass, gauge etc divided into squares edges of framing, plain, chamfered or rounded, mitred and rebated sash bars any numbers prepared to receive glass/ gauge and all as specified.

All as per Sl Item No. 1.039 above but for 35mm thick.as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete.

S&F 35 mm thick plain framed panelled shutters (any number of panels), with panels of timber flat on both side (feather edged) or veneered particle board, medium density, wood particle board with commercial face veneers complete all as directed.

S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel moulded both side Prelam PVC sheet strip of 20mm width stuck inside with solvent cement for stiles prelam PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of both sidePrelam PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement.

S&F of solid PVC door frame of size 50mmx47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with MS square tube, suppling and fixing in opening complete.

S&F Butt hinges medium weight, cold rolled mild steel of size 100 mm.

S&F Butt hinges medium weight, cold rolled mild steel of size 75 mm.

S&F 300 mm long aluminium anodized alloy sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts etc complete all as directed.

S&F 125mm long extruded Aluminium alloy handles, fabricated type anodised.

S & F 150mm long extruded Aluminium alloy handles, fabricated type, anodised.

S & F 125mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S & F 150mm long extruded Aluminium anodized barrel tower bolt of extruded section and fixed.

S&F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each

S&F sheet glass 3.00 mm thick, ordinary quality and glazing with beads fixed with metal panel pin in square n exc 0.5 Sqm each as in repair

All as per Sl Item No. 1.051 above but 3.00 mm thick figured glass.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

S&F in repairs stainless steel wire cloth, 0.36 mm nominal dia of wire and avergae width of aperture 1.40 mm and fixed with stainless steel wire staples, etc. complete all as specified and as directed.

M&L for two coats of synthetic enamel paint over a coat of pink primer on new wood surfaces width or girth exc 10cm including preperation of surfaces complete.

S&F prelamintated particle board of 18mm thick, interior grade, one side with decorative lamination other side balancing white lamination, fixed with screws in pelmet boxes, shelves or cupboard shutters or in narrow width n exc 15 CM each, rebated or flat edged as in repairs complete all as directed.

S&F Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, overall length 140 mm of cover plate as in repairs.

S&F 100mm long Hasp and Staple, Safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S&F 300mm MS ordinary rat tail rod pattern springs including roller & roller plate complete as in repair

S&F Stainless steel curtain rod 19/20 mm dia, complete all as specified and as directed.

S&F fancy type stainless steel bracket for 20 mm dia for curtain rod in matching color.

S & F Brass CP mixer of 15 mm dia for mixing hot & cold water screwed down for iron pipe and fixed in repair

S&F in repairs Stop valves fancy type, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15 mm bore pipe complete.

S&F in repairs Bib taps, fancy type, chromium plated, cast copper alloy screwed down, screwed for iron pipe or for brass ferrule and fixed to 15 mm bore pipe complete.

S&F in repairs Pillar tap cast copper alloy, fancy type, with capstan heads, chromium plated, screwed down, high pressure with or without letter 'HOT' or 'COLD' with long screwed shanks and fly nuts, screwed for fixing to 15 mm bore pipe complete.

S&F in repairs Bib tap standard of PTMT any colour high pressure screwed for 15 mm bore dia iron pipe and fixed (Minimum weight 15mm-90gms/20mm-125gms) complete.

S&F in repairs Vitreous China wash down water closet pan (pedestal pattern) and trap, white including connection to drain (outgoing pipe, flushing pipe, antisyphonage pipe, etc.), plastic water closet seat, white / off white closed pattern with flat bottom cover and hinging device complete all as specified and as directed.

S&F in repairs Vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests complete all as specified and as directed.

Supply and fix PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in repairs.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm as in repair

S&F in repairs vitreous china wash basin, white, flat back size 550 mm x 400 mm, including cutting for and pinning in ends of brackets or erecting stand but excluding taps, pvc conections but including brackets,waste pipe, waste coupling complete all as specified and as directed.

S&F in repairs sinks with drainage board made of stainless steel l mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar 1:3 to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm (approx with + 10 mm difference in dimensions as per manufacturers Catalogue) complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack of size 31" x 30" x 10" (approx with + 10 mm difference in dimensions as per manufacturers Catalogue), thickness of stainless steel sheet shall not be less than 0.80 mm complete all as specified and as directed.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floors, approons etc

M&L Granite stone slab 18-20 mm thick machine cut, bedded, laid over and including screed bed or bedding layer of mortar 15 mm thick in Cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

S&F glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard railing 60 cm long in repairs.

S&F in repair shower rose fancy type chromium plated 120 mm (minimum) size with swivel joints suitable for 15 mm bore pipe including shower arm chromium plated 15 mm dia, 190 mm (minimum) long with bend of 45 degree complete all as specified and directed.

S&F MS hat pegs,solid body,125mm to 175mm as specified and directed

S&F tubular towel ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats(minimum weight 90gms).(Make-Prayag/Jaquar/Jainko)

S&F aluminium anodised tubular towel rail 20mm dia "D" type 60 cm long between flange fixed in repair.(Make-Prayag/Jaquar/Jainko)

S&F Grating doom 100 mm dia with waste hole of PTMT (Minimum weight 40gms) complete all as specified and as directed.

S&F Plastic water closet seat cover soft closed white with bottom and cover fixed with aluminium hinging device in repair.

S&F health faucet, chromium plated, fancy type with push button and one metre long chromium plated flexible tube suitable for 15 mm bore pipe complete all as specified and directed.

S&F Corner Sheet glass shelf assembly with CP metal bracket and CP guard rail complete all as specified and directed.

SCHEDULE 'A' PART-II (INTERNAL ELECTRIFICATION WORK)

Taking down carefully copper /aluminium point wiring (light, fan socket or power) complete, including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC casing caping (heavy duty) of size not less than 20 mm width and accessories, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one light / fan point controlled by one 5/6 amps, one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one bell point controlled by one 5/6 amps, one way bell push including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for for one 5/6 amps socket outlet on same board controlled with other switch complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 1.5 Sqmm (phase & neutral) and one run of 1.5 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 5/6 amps socket outlet on independent board controlled with one, oneway switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

M&L Point wiring with two runs of FRLSH grade PVC insulated unsheathed mulri-stranded copper conductor of size 4 Sqmm (phase & neutral) and one run of 4 Sqmm FRLSH grade PVC insulated unsheathed multi-stranded copper conductor for earth continuity wire to be drawn in and including PVC rigid conduit (heavy duty) of size not less than 20 mm dia and conduit accessories with concealed wiring, sunk MS sheet metal switch/Terminal box 1.2 mm thick and hylum switch board cover 3.0 mm thick fixed with brass screws with cap washers for one 15/16 amps socket outlet on independent board controlled with one, 15/16 amps one way switch including all necessary wall cutting and making good disturbed surface with cement mortar 1:6 or PCC 1:3:6, type C-0 and matching with existing surfaces complete all as directed and specified.

Taking down unserviceable sub main /Sub circuit wiring of any type and size including conduit, batten wiring for necessary repair/replacement.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 2.5 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 2.5 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 25 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 4 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 4 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 25 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) All runs of copper conductor and one run of conduit shall be measured as one run length.

Supply and fix sub-main wiring with PVC insulated & unsheathed two run of 6 Sqmm single core multi stranded copper conductor cable (FRLSH), 1100 Volt grade alongwith one run of 6 Sqmm PVC insulated & unsheathed copper conductor cable (FRLSH), 1100 Volt grade, connected to common earth dolly as earth continuity conductor, drawn through in pvc concealed conduit 25 mm bore heavy grade complete all as specified and as directed by the Engr-in-Charge.. Note : (i) All runs of copper conductor and one run of conduit shall be measured as one run length.

S&F Switch piano, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells

Fixing only Switch piano, flush type single pole, one way, 5 Amps (Serviceable switch obtained from item No. 2.001 shall be reused).

S&F Switch piano, flush type, single pole, one way 15 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells

Fixing only Switch piano, flush type single pole, one way,15 Amps (Serviceable switch obtained from item No. 2.001 shall be reused).

S&F Bell push Switch, flush type, single pole, one way 5 Amps, 240V complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S&F Call Bell ,Ding-Dong ,single pole, AC, 230 Volts complete all as directed by Engineer-in-Charge. Make:- Anchor/Cona/Havells.

S&F Switch socket combination 2 in 1, 5 pin, 5 Amps flush type 240 Volt . Make:- Anchor/ Cona/Havells.

Fixing only Switch socket combination 5 Amps, flush type (Serviceable awitch socket combination obtained from item No 2.001 shall be reused)

S&F Socket outlet 2 in 1, 5 pin, 5 Amps flush type 240 Volt . Make:- Anchor/ Cona/Havells.

Fixing only socket Outlet 5 Amps, flush type (Serviceable awitch socket combination obtained from item No 2.001 shall be reused)

S&F Socket outlet 2 in 1, 5 pin, 5/15 Amps flush type 240 Volt . Make:- Anchor/ Cona/Havells.

Fixing only socket Outlet 15 Amps, flush type (Serviceable awitch socket combination obtained from item No 2.001 shall be reused)

S&F Switch socket combination 5/15 Amps flush type,6 pin,5 in 1. Make:- Anchor/Cona/Havells

Fixing only Switch socket combination 15 Amps (Serviceable Switch socket combination obtained from item No 2.001 shall be reused)

S&F Ceiling rose,3 terminal PVC/poly carbonate isolated body. Make:- Anchor / Cona/Havells.

Fixing only ceiling rose (Serviceable Ceiling rose obtained from item No 2.001 shall be reused)

S&F Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings. Make:- Anchor / Cona/Havells.

Fixing only lamp holder (Serviceable Lamp holder obtained from item No 2.001 shall be reused)

Supply and fixing of Step type electronic Fan regulator socket type on the existing phonolic laminated sheet etc as required as existing type and size (Make-Anchor/Cona/Havells)

Supply and fixing including connection of modular switch one way 6 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing including connection of modular switch one way 16 Amps 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing modular Bell push 6A 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular Switch socket combination 2 in 1,5 pin 5 amps 3 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular Switch socket combination 2 in 1,6 pin 16 amps 3 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular socket outlet 2 /3 pin 6 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply & fixing including connection modular socket outlet 2 /3 pin 6/16 Amps 2 modules complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing of Modular Fan regulator,120 watts (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 1 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 2 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 3 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 4 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 6 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing white modular cover plate with frame 8 Module complete all as specified and directed. (Make : .Crabtree/Cona/Havells)

Supply and fixing modular metal flush box 1/2 Module complete all as specified and directed.

Supply and fixing modular metal flush box 3 Module complete all as specified and directed.

Supply and fixing modular metal flush box 4 Module complete all as specified and directed.

Supply and fixing modular metal flush box 6 Module complete all as specified and directed.

Taking down old Unserviceable DB including fittings/fixtures with MCBs of any make and size all as specified and directed

S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 4 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:DBSPN006DD of L&T or STANDARD/ LEGREND )

S&F MCB DB made of sheet steel phosphatised, powder painted double door with bus bar, neutral link, earth bar and din rail of SPN 6 way, 240 Volts fixed in wall,making good disturbed surfaces, complete all as specified. (Make/Model :Cat No:DBSPN006DD of L&T or STANDARD/ LEGREND )

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 8 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified.(Make : STANDARD/L&T/LEGREND

S&F MCB DB made of sheet steel phosphatised, powder painted with bus bar, neutral link, earth bar and din rail of SPN 12 way, 240 Volts double door fixed in wall , making good disturbed surfaces, complete all as specified.(Make : STANDARD/L&T/LEGREND

S&F MCB, SPN. 6-32 Amps rating 240, volt, 'C' series, 10 kA (Make L&T,Cat No.BB20320D or Standard/Legrand)

Fixing only MCB SPN 6-32 Amps (Serviceable MCB obtained from item No.21 to 25 shall be reused).

S&F MCB, SP, 6-32 Amps, 240 volt, 'C' Series, 10 kA ( Make L&T,Cat No.BB10320D or Standard &C&S ).

Fixing MCB SP 6-32 Amps (Serviceable MCB obtained from respective items shall be reused).

Supply and fixing of Round surface mounted LED Slim panel of capacity 12 watt PDC white finish aluminium housing with high translucent frosted plastic diffuser of robust Luminaire with efficacy of 100lm/w. (Make/Model No:-LCDSPLN-R-12-CDL(PEARL NIOS-R) of Crompton or equivalent of C&S/Havells.

Supply and fixing Highly robust industrial Box type LED extruded Batten type indoor decorative type luminaire suitable for LED Tube 1 x 16/20 watt (4ft ) complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. (Make /Model No :-IGP161LT8-16 (ECO-I )of Crompton or equivalent of C&S/Havells)

S & F LED Polycarbonate T8 Tube with in built driver with metal heat sink double sided connection of capacity 1 x 20 watts all as specified and directed,Make/Model No:-LT8-20-865-(2) ULTRON of Crompton or equivalent of C&S/Havells

Supply and fixing 1x10 watt (2ft) LED Batten indoor decorative type robust and high performance extruded Batten suitable for Mirror LED lamps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. (Make /Model No :-LCL-10-CDL(TRIMLINE) of Crompton or equivalent of C&S/Havells )

Supply and fixing High-quality design LED Tube light fittings in extruded aluminium housing with high quality PC diffuser 1x20 watt with enhances safety and relible ,robust housing structure with decorative end caps complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable including taking down old light fittings complete all as specified and directed. (Make /Model No :- CCS-100-20-65-HL2-DP-NWH (BRIGHT LINEA) of Crompton or equivalent of C&S/Havells )

S&F in repairs heavy duty anchor bolts made of mild steel of size 10mm dia 75mm long including necessary drilling on wall for fixing of steel frame all as specified & directed.

Supply and fixing in repair sheet metal encloser box including Plug and socket with 20 Amps MCB (SP) with taking down old U/S existing sheetmetal enclosure. ( Make L&T/Legrand /Standard).

Supply and fixing in repair sheet metal encloser box including Plug and socket with 20 Amps MCB (SPN) with taking down old U/S existing sheetmetal enclosure. ( Make L&T/Legrand /Standard).

Disconnecting electrical wire from ceiling rose, taking down ceiling fan of any type/size and make, removing substances from bearing, bush by using kerosene oil, carrying out fresh lubrication using grease and to make the ceiling fan noise free for smooth functioning (including replacement of worn-out / unserviceable like capacitor, connector, canopy, bearing, down road, PVC cable etc) assembling the repaired ceiling fan including spray painting with one coat of synthetic enamel paint of existing colour code including writing MES No with black synthetic enamel paint complete including testing hanging the ceiling fan as its own position, connection with point wiring complete all as directed by Engineer-in-Charge. (NOTE : Spare parts to be replaced shall be measured and paid separately., as supply only items was labour element in voles for replacement of spare parts shall deemed to be included in the unit rate quoted by the tenderer).

All as per Sl Item No. 2.066 here-in-before but for exhaust fan 300 mm/380mm sweep.

Supply only PVC insulated, sheathed twin twisted stranded copper conductor flexible cable of size 1.5 Sqmm for ceiling fan.

S&F in repairs of PVC plug top 5 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Havells)

S&F in repairs of PVC plug top 15 Amps, 3 pin,230 volts complete all as directed. (Make:Anchor/Cona/Havells)

Supply and Replacement of 3-core copper conductor of sizes 2.5 sq.mm with taking down of old unserviceable incoming cables of Geyser.

Rounaq Enterprise

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

DS ENTERPRISES

ELECTRO COMMERCIAL CO

RANA ENTERPRISES

jlenterprise

Rekha Enterprises

Bidder Name

RANA ENTERPRISES

DS ENTERPRISES

Rounaq Enterprise

J B NATH AND SON

Rekha Enterprises

ELECTRO COMMERCIAL CO

CONSTRUCTION AND MAINTENANCE ENGINEERING CORPORATION

jlenterprise