PROVN OF LBW AND SPECIAL REPAIR WORKS AT AGE BR-I UNDER GE BRICHGUNJ PORT BLAIR.

Amount

Excavation in post holes (or similar holes) each not exceeding 0.5 cum getting out in Hard/dense soil returnig filling in and ramming earth or broken rubble mixed with earth around in layers n.exc 25cm watering and removing surplus soil to a distance not exceeding 50m and making good surfaces complete.

M & L PCC in foundation filling and mass concrete typeType C2 1:3:6 (40 mm graded aggregate)

M&L for providing reinforced cement concrete type B-1 (using 20mm graded stone1 :2:4 20mm graded aggregate) in precast posts, fencing posts, straining or terminal posts, struts etc, for fencing, average sectional area exc 100 sqcm and n.exc 250 Sqcm with or without chammfered angles and flat, splayed, rounded or mitred tops as directed and fixed etc. compete all as spd and directed.

M & L for Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions

M&L for high strength corrosion resistant TMT bars 10mm dia and over cut to length, bent to shape required including cranking and bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90mm dia) or securing with clips complete.

All as per item No 5.00 above but 5 to 10 mm dia as in stirrups, spacer etc complete.

Supply & Fix mild steel angles, bars, flats wind ties for roof including securing bolts, posts and struts in fencing etc including cutting tops to shape as directed, drilling holes, notching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling bolting or riveting, etc. and similar work confirming to Fe-290 Gde E-165 complete.all as specified and directed.

Supply only PVC coated (1mm thick) chain link fencing exc 2.00 but n.exc 3.50 kg per sqm with size of mesh 50 x 50 mm and thickness of wire n.exc 2.83 mm all as specified and as directed.

Fixing only PVC coated chain link fencing including fixing of line wires any mesh, size and any type of standards, rails, straining bolts etc including provision of binding wires complete.(Supply of MS line wire and flat iron bolt & nuts measured and paid seperately)

Supply only 6mm dia wire PVC coated for support/line wire to chain link fencing complete.

Supply only mild steel bolts with hexagonal or square head one end and screwed the other or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut exc 5 cm long n.exc 10 cm long dia metre of neck exceeding 11 to 15 mm complete.

M&L for applying two coats of cement base paint over a coat of primer on new plaster or untreated surfaces on walls incl preparation of wall surfaces all as specified

M&L for preparing new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion for Natural graound and making good disturbed ground all as speci fied and directed

Dismantling fencing wire mesh,any type

Dismantling wrought iron or mild steel work of any description not otherwise provided for

M&L for second class hardwood as in scantlings clean sawn timber framed and fixed.

M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm.

All as per item No 20.00 hereinbefore but exc 6.00 and n.exc 13 Sqcm but bull nosed, splayed chamfered or rounded on one edge or face.

S & F 75 size stainless steel butt hinges complete all as specified and directed

S&F Butt hinges, medium weight coldrolled mild steel and fixed 50mm size.

Supply & Fixing mild steel 40mm dia Brass polished cupboard knobs fixed with nut, screw and washer of.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised.

S&F 75mm size hasp and staple, safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws.

S & F Aluminium anodised (minimum anodisation is 15 microns) Door / window / Ventilator/partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement etc, complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge. (Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. However cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, prelaminated particle boards, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm long

S&F 150mm long extruded aluminium alloy anodised handles fabricated type, anodised.

S&F 75mm long extruded aluminium alloy anodised handles fabricated type, anodised.

S&F sheet glass ordinary Quality and glazing with oil putty in square exc 0.5 sqm in each pane of thickness 6.3 mm.

M&L for 19/20mm thick prelaminated particle board to fixed in repair interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work.

M & L for Plywood of 19mm thick, grade BWP, type BB fixed with screws to timber frame work all as specified and directed

S&F aluminium alloy anodisoed sliding door bolts with hasp & stapes (bolt type) 300 mm long and fishing clips of shot cost or extruded section & fishing bolts or cost aluminium alloy & fixed complete all as specified and as directed.

S&F (Aluminium extruded section) door closer hydraulically regulated designation No 3 universal type suitable for door shutters of 851 to 1000 mm in width and weight with 61 to 80 Kg and fixed complete all as specified and as directed.

S&F in repair aluminium composite panel sheet of 3mm to 4mm thick, fixed on existing aluminium frame work with plastic strips (double sided sticker) of suitable size of varying thickness of 10mm to 30mm including aluminium frame work, applying adhesive over aluminium sections for fixing composite panel and fixed with screws. The joints of panels shall be filled with weather proof sealant,The board shall be stuck with a layer of any colour high intensity reflective grade polymer sticker installed using epoxy adhesive, complete all as specified and as directed.

M & L for point wiring in and including rigid non metallic PVC conduit medium grade, ISI marked of suitable dia, with 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with pressed steel terminal boxes of suitable sizes & 1.6mm thick duly painted inner & outside for mounting switches, sockets, fan regulator etc with 3mm thick plastic laminated sheet cover with brass screw, cup washer & including PVC insulated & unsheathed stranded copper condutor of 1.5 Sqmm as continuous earth wire complete for One fan point point controlled by one switch.

M & L Switch flush type single pole, one way, 5 Amps 240 Volts all as specified and directed.

M & L ceiling rose 65 X 50 mm , three terminals PVC/Polycarbonate complete all as specified and directed.

S& F wall mounted fan of sweep 400mm white colour including all tems for fixing on wall all as specified and as directed by Engineer-in-charge. Make : Havells

S&F MCB SP 5 to 40 Amp, 240 volts of 10 KA rupturing capacity, B-curve type in the existing DB all as specified.

MAJUMDAR FURNITURE

B.R. ENTERPRISES

M/s Kamal Electrical

SK CONSTRUCTION

M/s S U Enterprises

DEEPAK AGENCIES

P Babu