West Bengal

Active

Works

CIVIL WORKS

NIeT-58 (Sl. No. 10)/2026-27

NORTH BENGAL DEVELOPMENT DEPARTMENT

Alipurduar, West Bengal

Amount: ₹11.4 LCloses: 1 Oct 202621 Sept 20264d left

Timeline

Published7 Sept 2026
Closes1 Oct 202621 Sept 2026
Bid Opening5 Oct 202624 Sept 2026

Corrigenda

Corrigendum

2 updatesLatest on 25 Sept 2026Submission Ends:21 Sept 20261 Oct 2026

Date changes

Download Ends21 Sept 20261 Oct 2026Submission Ends21 Sept 20261 Oct 2026Bid Opening24 Sept 20265 Oct 2026

Tender Value

₹11.4 L

EMD Value

₹22,842

Closing Date

1 Oct 2026, 3:00 pm4d left

Tender Inviting Organisation

Name

Sourav Bhattacharya, Executive Engineer-NBDD

Address

Annex Building, Uttarkanya

Work Description

Construction of Paver Block Road starting from Durga mandir to the residence Samir Sarkar near Culvert within ward no. 08, Falakata Municipality, Alipurduar District during the year 2026-27 (Length 240 mtr)

Tender Information

Tender ID

2026_NBDD_1040648_10

Reference Number

NBDD/BS/EE/NIe-T- 58/Sl. No. 01 to 21/2026-27

Tender Type

Open Tender

Product Category

CIVIL WORKS

Form of Contract

Percentage

Period of Work

240 days

Location

Alipurduar

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

6 documents required · 6 mandatory

Fee/PreQual/Technical

RequiredNIT (.pdf)

Required2911 (.pdf)

RequiredEMD (.pdf)

RequiredCorrigendum (.pdf)

RequiredOthers (.pdf)

Finance

RequiredBOQ (.xls)

Fee & Financial Details

EMD Fee Amount

₹22,842

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

1 Oct 2026

Published

7 Sept 2026

Bid Opening

5 Oct 2026

Download Starts

7 Sept 2026

Download Ends

1 Oct 2026

Submission Starts

7 Sept 2026

Bill of Quantities

PercentageBoQ_Ver3.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). 8D) PCC Grade M20 Using Concrete Mixer	18	Cu.M	6,238.96	₹1,12,299
2	Concrete Block Pavement Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C. d) Type - IV (80 mm thickness) inter locking system	552	Cu.M	1,789.67	₹9,87,897.84
3	Retro-reflective studs Supplying and fixing of Metal Road studs with shank, made of Die-cast Aluminium alloy molded body with the size 100x100x19.8 mm, shank size 50 mm, having reflective panels of 34 glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity having reflective panels in yellow, red and white plastic with yellow, red, white or green glass elements. The weight of Aluminium stud should be not less than 370 grams. The stud shall have a compressive strength test certificate of 40 tons in accordance with ASTDM D 4280-04, clause no 806 of 5 th revision of MoRT&Hs’s and successfully passing retro reflectivity test as per EN 1463 part 1 & part 2 , from a reputed international laboratory. The fixing of road studs shall be done by using a recommended Two Component Epoxy after drilling 60 mm hole on the road for the shank to go inside.	60	Nos	698.35	₹41,901

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.90 MB

Tendernotice_2.pdf

PDF • 0.51 MB

Work Item Documents

BOQ_2555793.xls

BOQ • 1.01 MB

Corrigendum Documents

2nd_Date_Corrigendum.pdf

PDF • 0.44 MB

Date_Corrigendum.pdf

PDF • 0.72 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Plain/Reinforced cement concrete in open foundation complete all including vibrating and compacting, finishing, curing, sampling, testing etc. as per drawing and Technical Specifications (Reference to MORT&H's specifications 1500, 1700 & 2200). 8D) PCC Grade M20 Using Concrete Mixer

Cu.M

6,238.96

₹1,12,299

Concrete Block Pavement Supplying and Laying in the particular pattern of cement concrete block pavements with BIS certification and spacer nib of size and shape with aspect ratio as per IS 15658 with cement concrete grade not less than M40 on the prepared base course of specified CBR as mentioned in design and drawing with a cushion of bedding sand of 30 to 50 mm thick (grading of the bedding sand as per clause 6.5.1 of IRC SP-63) and filling up the gaps between two paver block with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2) complete as per IRC SP - 63 with proper confinement of bedding and joint filling sand, compaction,levelling and filling up of the edge gaps with mortar. Type I, II,III, IV should be as per design requeirment or instruction of E-I-C. d) Type - IV (80 mm thickness) inter locking system

552

Cu.M

1,789.67

₹9,87,897.84

Retro-reflective studs Supplying and fixing of Metal Road studs with shank, made of Die-cast Aluminium alloy molded body with the size 100x100x19.8 mm, shank size 50 mm, having reflective panels of 34 glass reflective elements embedded in plastic and 19 degrees tilted to provide the highest reflectivity having reflective panels in yellow, red and white plastic with yellow, red, white or green glass elements. The weight of Aluminium stud should be not less than 370 grams. The stud shall have a compressive strength test certificate of 40 tons in accordance with ASTDM D 4280-04, clause no 806 of 5 th revision of MoRT&Hs’s and successfully passing retro reflectivity test as per EN 1463 part 1 & part 2 , from a reputed international laboratory. The fixing of road studs shall be done by using a recommended Two Component Epoxy after drilling 60 mm hole on the road for the shank to go inside.

Nos

698.35

₹41,901