Upgradation of SSH by way of Fabrication of CGI Shed of Size 20 mtr x 11 mtr for covering 03 nos. DG Sets of Capacity 750 KVA each installed adjacent to Main Electrical Distribution Panel Room at Govt. Super Specaility Hospital Jammu.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.All kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level in 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate) 40mm nominal size crushed.

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centring, shuttering, finishing and reinforcement, including Admixtures in recommended proportions, (as per IS 9103) to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge All work upto plinth level.

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete TMT bars.

Filling available excavated earth (excluding rock) in plinth, sides of foundations etc in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, lead upto 50Mt & lift upto 1.50M.

Centering and shuttering including strutting, propping etc. and removal of form work for :- Foundations, footings, bases of columns.

Centering and shuttering including strutting, propping etc. and removal of form work for :- Edges of slabs and breaks in floors and walls.Under 20 cm wide.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses and Column etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Applying two coats of insitu Epoxy finishing paint of 30 micron thickness per coat on unencased structural parts and MS hollow sections (Epoxy paint shall be not paid separately). Site-welds including M.S. inserts (e.g. Foundation bolts with pipe - sleeves, lugged plate/ angle surface inserts, through pipe inserts etc. ) as per drawings and direction of Engineer-In-Charge.Hot finished seamless type tube. Make :- Tata, Sail , Jindal

Providing and fixing M.S bolts including nuts and washers complete.(Make:-Hilti, Fischer,MKT)(HIT--RE500 V4 WITH AM-8.8 M24X1000, )

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.