Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-01₹9.3 LAccepted-AOC | L-01 | Accepted-AOC Being lowest | |
| 2 | L-02₹9.8 L+₹41,174 (4.36%)Rejected-Finance | L-02 | Rejected-Finance Not being lowest | |
| 3 | L-03₹9.9 L+₹45,151 (4.79%)Rejected-Finance | L-03 | Rejected-Finance Not being lowest | |
| 4 | L-04₹9.9 L+₹48,180 (5.11%)Rejected-Finance | L-04 | Rejected-Finance Not being lowest | |
| 5 | L-05₹9.9 L+₹48,541 (5.14%)Rejected-Finance | L-05 | Rejected-Finance Not being lowest |
Tender Value
₹8.9 L
EMD Value
₹17,800
Closing Date
24 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
AGE (I) Darjeeling
P.O. Jalapahar Dist- Darjeeling (WB) Pin- 734103
PROVN OF CERTAIN MINOR AND REV WORKS AT JALAPAHAR AREA UNDER AGE(I) DARJEELING
2022_MES_548352_1
8984/E8
Open Tender
Civil Works
Item Rate
182 days
AGE (I) Darjeeling
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
Yes
AGE (I) Darjeeling
₹17,800
Yes
30 Sept 2022
29 Aug 2022
26 Sept 2022
29 Aug 2022
24 Sept 2022
12 Sept 2022
29 Aug 2022 - 5 Sept 2022
Amount
Demolition of Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level), complete all as specified and as directed.
M&L for demolition of Cement Concrete (Un-reinforced) of any description in any position not otherwise specially provided for, complete all as specified and as directed.
M&L for demolition of Brick Work/ Stone masonary built in Cement Mortar including all Quoins, Arches, Pillars, etc. of any description, complete all as specified and as directed.
M&L for dismantling Floor, Hearth or Wall Tiling including Cement Mortar Bedding (but not backing), removing from the Sites and rubbish off the Premises, complete all as specified and as directed.
Taking down Chowkat or Frame (without taking off Shutter from the Frame) not exc. 1.50 Square Metre Each, complete all as specified and as directed.
Taking down Chowkat or Frame (without taking off Shutter from the Frame) exc. 1.50 Square Metre but not exc. 4.00 Square Metre Each, complete all as specified and as directed.
M&L for taking down Cement Plaster of any description on Brick Walls, Concrete Surfaces including racking out joints, hacking for key, scrubbing down with Water, remove Dust, debries/ rubbish etc., complete all as specified and as directed.
Excavating in Post Holes (or similar holes) in Soft/Loose Soil, each not exc. 0.50 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 Cm, watering, and removing surplus soil to a distance not exc 50.00 Metre and making good surface, complete all as specified and as directed.
Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.
Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.
Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate) in Foundations, Filling and Mass Concrete, Foundation of Pole etc. including use and waste of Formwork as required/ordered at Site(s), complete all as specified and as directed.
M&L for Brick Work with Fly Ash Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.
M&L for Brickwork with Fly ash bricks in Half brick thick (Old Size Bricks) walling, built in Cement Mortar 1:4, complete all as specified and as directed.
M&L for Providing Reinforced Cement Concrete (Nominal Mix) 1:1½:3, type A-1 (20mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Providing Reinforced Cement Concrete (Nominal Mix) 1:1½:3, type A-1 (20mm graded stone aggregate) as in Columns, pillars, piers, posts and struts, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Providing Reinforced Cement Concrete (Nominal Mix) 1:1½:3, type A-1 (20mm graded stone aggregate) as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Providing Reinforced Cement Concrete (Nominal Mix) 1:1½:3, type A-1 (20mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and as directed. NOTE : Reinforcement & Formwork will be measured and paid separately under relevant Items.
M&L for Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, flat rough finished surfaces of Concrete, complete all as specified and as directed.
M&L for Formwork to sides of pillars, posts, struts, piers, columns and stanchions, square/rectangular rough finished surfaces of Concrete, complete all as specified and as directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., flat rough finished surfaces of Concrete, complete all as specified and as directed.
M&L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), flat rough finished surfaces of Concrete, complete all as specified and as directed.
M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L for TMT Bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire (annealed) not less than 0.90 mm dia, complete all as specified and as directed.
M&L Steel Work in Tubular Trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS:1161-1979 grade St.-240, complete all as specified and as directed.
M&L for Mild Steel works as in Hand rails, half round or other steel section, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc., complete all as specified and as directed.
M&L for Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde- E- 250) quality- A, complete all as specified and as directed.
M&L Cement Concrete 1:2:4 (20mm graded aggregate) as in Kerbs, Coping, Hold fast blocks etc. Chamfered Edges including use and waste of Form-work as required/ordered at Site(s), complete all as specified and as directed.
S&F of Mild Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded, complete all as specified and as directed.
S&F of Mild Steel windows or ventilators, fixed type, with glazing bars, complete all as specified and as directed.
M&L for Rendering 5mm thick in Cement Mortar 1:3 on Concrete Surfaces as in Ceiling, etc., plastered surfaces finished Even and Fair, complete all as specified and as directed.
M&L for Rendering (Internally) 15mm thick in Cement Mortar 1:6 on Brick Walls or on Concrete Surfaces, plastered surfaces finished Even and Fair, complete all as specified and as directed.
M&L for Rendering (Externally) 15mm thick in Cement Mortar 1:4 in two layers on Brick Walls/Concrete Surfaces, 5mm thick top layer mixed with WPC as per Manufactures instruction, plastered surfaces finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE: WPC shall be Measured and Paid as ‘Supply only’ under relevant Item.
Supply only Integral Water Proofing Compound (WPC), conforming to IS-2465:1975 and as approved, complete all as specified and directed.
M&L for Screed Bed or Bedding Layer 15mm thick in Cement Mortar 1:6 for laying Floor Finishes/Tiles, complete all as specified and as directed.
M&L for Rendering or Bedding Layer 10mm thick in Cement Mortar 1:3 on Walls, etc. for fixing Tiles as Skirtings, Dados, etc, complete all as specified and as directed.
M&L for providing non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.
M&L for Glazed Ceramic Tiles 300x200x7mm thick in Vertical Surface i.e. Dado, Skirting, etc., Set and Jointed in Neat Cement Slurry and pointed in White or Colour Cement to match the Tiles, complete all as specified and as directed. NOTE : Screed Bed will be measured and paid separately under appropriate Item.
M&L for providing non skid ceramic coloured paver/parking tiles 8 to 10mm thick (square/rectangular) area of each tile exc 0.06 Sqm but not exc 0.11 Sqm, in floors etc set and jointed neat cement slurry and pointed in white or coloured cement to match complete all as specified as directed. Note - Screed bed will be measured to paid seperately.
M&L for preparing new Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of Ceiling and applying Three Coats of White Wash, complete all as specified and as directed.
M&L for preparing newly plastered surfaces of Walls and applying Two Coats of Oil Bound Distemper over a coat of Chalk Whitening, complete all as specified and as directed.
M&L for preparing newly Plastered Surfaces of Walls and applying Two Coats of Cement Base Paint over a coat of Alkali resistant Primer, complete all as specified and as directed.
M&L for preparing old treated/decorated Plastered/Unplastered Surfaces of Walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying Two Coats of Oil Bound Distemper, complete all as specified and as directed.
M&L Complete removal of existing Surface Treatment by washing rubbing down and stopping of old decorated/treated surfaces of Walls and applying Two Coats of Cement Base Paint, complete all as specified and as directed.
M&L preparing Old Painted Wood and Wood base Surfaces of any description, not otherwise described over 10 Cm Width or Girth and applying One Coat of Synthetic Enamel Paint (1st quality/grade), complete all as specified and as directed.
M&L Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), 100mm thick as in Sub-base of Floor, Path, Hardstanding, etc., laid in alternate bays, finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.
M&L for Cement Concrete 1:3:6, type C-2 (40mm graded aggregate), as in Plinth protection/ Path etc., finishing Concrete Surfaces Even and Fair, complete all as specified and as directed.
M&L for providing Glass dividing strips, 3 mm thick & 38 mm wide, inserted in position, conform to design, complete all as specified and as directed.
M&L for Water Proofing Treatment on existing cleaned RCC Roof with the following Specifications and Manufacturer's instructions, complete all as specified and as directed :- (a) Rendering 10mm thick in Cement Mortar 1:4, Plastered Surfaces finished Even and Smooth. The Plastered Surfaces shall be cured properly for 7 Days by Ponding of Water over Roof. (b) Preparing and cleaning of fully dry Plastered Surfaces as per IS:3067-1966. (c) Applying Bitumen Primer conforming to IS-3384-1986 over the Cleaned Plastered Surface @ 0.30 Litre per Sqm. (d) Applying evenly One Coat Blow Hot Bitumen of grade 85/25 @ 1.20 Kg per Sqm on Primed Surfaces. (e) Applying a layer of APP based Polymeric Membrance 3.0mm thick (minimum) weighing 3.50 Kg per Sqm (reinforced) with Polyster Non-woven Fabric weighing not less than 160 Grams per Sqm by Torch application. The Overlaps shall be minimum 100mm on the Transverse direction and 75mm on Longitudinal direction. (f) Applying One Coat of Aluminium Paint @ 0.10 Litre per Sqm over APP based Polymeric Membrane.
M&L for Mild Steel adjustable prop of suitable size/ strength as per site requirement to provide temporary support to existing structures, likes; roof slab, beam, cantilever structures of any description and in any position, complete all as specified and as directed. (NOTE:- Props will be temporarily fixed in required position untill the same are instructed to remove by the Engg-in-Charge.)
Darjeeling Enterprises
JALAPAHAR HARDWARE
SANJAY KAUSHIK
KWOK YING CHIU
BIMAL BHATTRAI
TSHERING WANGYAL BHUTIA
HIRA SINGH
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .