CERTAIN REPAIRS TO ROADS, ROAD FURNITURE, PATH AND HARD STANDING AT ARMY LAND UNDER GE(I) CAMPBELL BAY

Amount

Repair to pot holes any depth, not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25mm in depth making good by filling in screened and graded road metal, watering and well ramming ( including supply of road metal ) but making good by applying tack coat at 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings), depth of potholes exceeding 30 mm complete all as specified and directed by Engineer-in-charge.

Preparing black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/ tack coat with bituminous primer using paving bitumen VG 10 of any penetration at 5 Kg. Per 10 Sqm all as specified and directed.

Material and Labour for Premixed sand seal coat with 0.06 Cum of sand mixed with 6.8 Kg. of paving bitumen, applied and rolled to a uniform smooth surface over and including 30 mm average consolidated thickness Bituminous premix carpet, with 0.27 Cum of granite stone chippings, mixed with 14.6 Kg of paving bitumen binder of VG 30 spread, rolled and compacted to required camber and gradient etc all as specified and directed.

Material and Labour for two coat of water based Painting as in lines, dashes, arrows, letters, etc. on roads pavements and the like not exceeding 10cm wide with road marking paint, white or golden yellow as specified and directed.

Material and Labour for Roughening surfaces of old concrete floor or concrete surfaces by picking, sweeping clean and washing down with water to remove dust, etc.

Material and Labour for 75 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate finishing surface even and smooth without using extra cement as directed by Engineer-in-charge .

Material and Labour for Plastic dividing strips, 1.5mm thick and inserted in position to conform to design as directed by Engineer in Charge

SWASTHIK ENGINEERING WORKS

M/S PANNER SELVAM

M/S RAJBUILDERS

MAHESWARI CONSTRUCTIONS

Govinda Swamy Construction

M/s Pintu Furniture

V CHINNA DURAI