Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹38.9 LAccepted-AOC B 12 VISHAKARMA JYOTI SUBHASH LANE MALAD E MUMBAI 400097 | MUMBAI SUBURBAN | MAHARASHTRA | 400097 | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.5 L+₹6.9 L (17.4%)Rejected-AOC | L2 | Rejected-AOC Not Accepted |
Tender Value
₹46 L
EMD Value
₹92,000
Closing Date
2 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Sanjeev Kumar Singh, IDSE, EE
Garrison Engineer North Mumbai-400029
REPAIR / MAINTENANCE OF E/M INSTALLATION AND OTHER ALLIED WORKS AT KALINA, KANDIVALI, MARVE, MALAD GHATKOPAR AND VIKHROLI UNDER GE (N) MUMBAI
2023_MES_583921_2
8124/E8
Open Tender
Civil Works
Item Rate
180 days
Garrison Engineer North Mumbai
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
Garrison Engineer North Mumbai
₹92,000
Yes
24 Jun 2023
2 May 2023
5 Jun 2023
2 May 2023
2 Jun 2023
19 May 2023
3 May 2023 - 10 May 2023
Amount
Demolition of brickwork built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for brick work built in cement mortar 1:6 using sub class 'B' bricks, straight or curved on plan exceeding 6 mtrs mean radius complete all as specified and as directed.
Demolition of cement concrete (un reinforced) in ground floors and paving not exc 15 cm thickness (below or above ground level) including chequered tiles and removal of rubbish to outside MD land etc complete all as specified and as per directed
Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.
Material and labour for 75mm thick plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in sub base of flooring / hard standing / path, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge.
Taking down of chowkats or frames with shutters not exceeding 1.5 sqm each (with out taking off shutters from the frames) after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.
Taking down of chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4.0 sqm each (with out taking off shutters from the frames) after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing on Serial Page No 178 of SSR Part II (pertaining to item No 08095) and edges to be painted to match with prelam sheet complete all as specified and as directed by Engr-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
Supply and fix factory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of M. S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC `C` channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at site as per specification & drawing on Serial Page No 174 of SSR Part II (pertaining to item No 08080) including necessary aluminium builders hardware for one door to be provided such as 100mm dia butt hinges - 3Nos, tower bolt 150mm dia - 2Nos, handle 150mm long - 2 Nos etc complete all as specified and as directed by Engineer-in-Charge. Make : RAJSHRI / SINTEX / TUFFFLON / M/s Navratan Specialty Chemical LLP – ‘Brand : GIZA’
Supply and fix 35mm thick factory made plain framed panelled door shutter 2nd class hardwood rail and style (any number of panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed by Engineer-in-Charge. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix 35mm thick factory made 2nd class hard wood glazed and skeleton shutter, open rebated, prepared to receive glass, gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutter as specified in SSR Part-I section 8, clause No 8.24 (b) complete all as specified and as directed by Engineer-in-Charge. Make: M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pvts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix aluminium anodized barrel tower bolt of extruded section of size 150mm long all as specified and as directed. Make : Crown / Jindal / Essess / Swastik
Supply and fix 150mm long extruded aluminium alloy anodized handles fabricated type all as specified and as directed. Make : Crown / Jindal / Essess / Swastik
Supply and fix 15 micron coloured aluminium sections for sliding or openable windows, ventilators, doors, partitions etc including fabrication of frame & shutters and fixing with necessary lugs, cleats, rollers, handles, locking arrangement etc including all accessories such as glazing clips and rubber beadings for fixing glass panes / wire mesh in frame complete all as specified and as directed by Engineer-in-Charge. Make : Hindalco/Indal (Indian Al Coy)/Jindal/Associated Profile & Aluminium Ltd/Ajit India Note: (i) Glass panes /wire mesh will be measured & paid separately. (ii) Rubber beading will not be weighed.
Supply and fix 15 micron coloured aluminium anodised grill of design No DG-101 or RG 102, 10 mm thick, cut to required size/shape, and fixed in position with and including aluminium beading and frame complete all as specified and as directed by Engineer-in-Charge. Make: DECOGRILLE of Associated group / Royal Alum grill Pvt Ltd or equivalent make as approved by GE
Supply and fix 4mm thick sheet glass, ordinary quality fixing with oil putty and glazing clip, in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain
Supply and fix 4 mm thick figured glass, pin head type and glazing with oil putty in square not exceeding 0.5 sqm each pane complete all as specified and as directed by Engineer-in-Charge Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain
Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish out side MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for non skid coloured ceramic tiles, 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in CM (1:6) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s RAK tiles
All as per item No.20 but in skirting/dado including 10mm thick CM 1:4 rendering of backing layer complete all as specified and as directed by Engineer-in-Charge
Material and labour for joint free, coloured glazed ceramic tiles of size 350mm x 250mm x 7 mm thick/ 450mm x 350mm x 7mm , on vertical surfaces etc., set and jointed in neat cement slurry and pointed in coloured cement to match over & including cement plaster 10 mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s RAK tiles
Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for APP modified waterproofing treatment to parapet wall with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4 lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. (c) Over the membrane provide a solar reflective bituminous aluminium paint @ 0.1 Kg/Sqm prescribed by manufacturer complete all as specified. Make of APP Membrane- (a) STP Ltd (b) Texsa India Ltd (c) IWL Ltd (d) TIKIDAN Note : Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.
Material and labour for APP modified waterproofing treatment to parapet wall with following specification including brushing off the surface to receive the treatment obtain the required surface complete as directed by Engineer-in-Charge :- (a) Applying oil bound bituminous primer @ 0.4 lit/Sqm of density 0.87-0.89Kg/lit of 250C on the prepared dry roof surface. (b) Laying 4mm thick APP membrane weight not less than 3.90 kg per sqm by torch application with minimum 10cm side lap and 15cm end lap. The laying of membrane shall be got done through an authorized applicator of manufacturer of APP membrane. Make of APP Membrane- (a) STP Ltd (b) Texsa India Ltd (c) IWL Ltd (d) TIKIDAN Note : Quoted rate includes the disconnection existing tanks of any litres capacity including all fittings, setting aside (for lowering if reqd) for roof treatment & reconnecting and refixing in position including all fittings complete all as directed.
Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mps as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge. Make: JINDAL / INDALCO / HINDALCO / ASSOCIATED Profiles and Aluminium Ltd / ESSAR colour coated sheets
Material and labour for rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates conforming to Fe- 290, Gde 165 etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints/Nerolac Paints/Berger Paints/Shalimar Paints
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. laid dry or laid dry and pointed complete all as specified and as directed by Engineer-in-Charge.
Material and labour for granite (mushroom granite) slab, 20mm thick, machine cut, work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of mushroom granite stone including necessary moulding of edges as required at site including grinding and polishing, over and including 15mm thick cement mortar (1:4) complete all as specified and as directed.
Material and labour for marble work 18 to 20 mm thick machine cut, table rubbed and polished, bedded and jointed as in steps, jambs, pillar, window cills, cooking platform and like bedded and jointed with grey cement slurry and pointing in white cement 1:2 using marble dust with admixture of pigment to match including 15mm thick screed bed in cement mortar 1:4 etc complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed by Engineer-in-Charge
Material and labour for 10mm thick rendering with cement mortar 1:6 on fair faces of brick or concrete surfaces, finishing even and smooth without using extra cement all as specified and as directed.
Material and labour for rendering 5mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering in cement mortar 1:6 of any thickness on fair faces of brick or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparing new surfaces of wall and applying two coats of cement based paint on wall surfaces complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar
Material and labour for 1.5mm thick wall care putty on plastered wall / ceiling surfaces complete all as specified and as directed.
Material and labour for complete removal of existing treatment of paint on old wall surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Material and labour for complete removal of existing treatment of paint on old ceiling surfaces and applying two coats of oil bound distemper with roller over a coat of alkali resistant wall primer etc complete all as specified and directed by Engineer in Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & NIcholson / Shalimar Paints
Supply and fix in repairs, 10 litre capacity, PVC flushing cistern, white, symphonic action type, low level, with in let, ball valve float and handle, PVC flush pipe, CI brackets etc complete all as specified and as directed by Engineer-in-Charge. Make : M/s Hindustan Sanitary Ware / Parryware / Commander / CERA / M/s Johnson Peddar
Supply and fix in repairs vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm excluding taps, waste pipe, chain and plug and porcelain stopper including brackets, chromium plated waste coupling, waste fitting etc, cutting for and pinning in ends of brackets, connecting to supply and waste pipe complete as specified and directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson Note:- Pillar taps, waste fittings, PVC connection, PVC waste pipe shall be measured and paid separately.
Supply and fix in repairs pillar taps fancy type cast copper alloy with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly nuts, screwed for iron pipes, 15mm bore complete all as specified and directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko
Supply and fix in repairs 15mm bore bib taps, fancy type, chromium plated, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule of 15mm all as specified and as directed by Engineer-in-Charge. Make : Jaquar (Essco)/Prayag / Seiko
Supply and fix in repairs, concealed type stop valve, cast copper alloy, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes or for unions of 15mm bore complete all as specified and directed by Engineer-in-Charge Make : Jaquar (Essco)/Prayag / Seiko
Supply and fix in repairs, 100 mm bore CI floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh
Supply and fix in repairs, UPVC Nahani trap,100 mm dia with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) etc, complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Supreme / Finolex
Supply and fix in repairs vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) with PVC seat cover chromium plated hinges & nuts including ‘P’ trap / 'S' trap, connection to drain flushing pipe, antisphonage pipe etc complete all as specified and as directed. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson/Neyveli Ceramics (Neycer)
Supply and fix in repair Swivel Shower of PTMT, 125mm, any colour for fixing with 15 mm pipe (Minimum weight 40gms) complete all as specified and as directed by Engineer-in-Charge. Make : Prayag / R.S. Industries (POLYTUF)
Supply and fix mild steel tubing medium grade 15mm bore, galvanized iron with all fittings such as Tees, elbows, sockets, bends, unions, short pieces, nipples, brass nuts and diminishing pieces complete all as per IS 1239, fixed to wall / ceiling or laid in floor with suitable size GI clamps including taking down existing GI pipe and making good disturbed surfaces as per existing surfaces complete all as specified and as directed by Engineer-in-Charge. Make: Tata / Jindal / Surya Prakash / Zenith
All as per item No.52 described here-in-before 20mm bore
All as per item No.52 described here-in-before 25mm bore
Supply and fix in repair 32mm bore low density polyethylene pipes(LDPE) of pressure rating 6 kg/ cm2 complete all as specified and as directed by Engineer-in-Charge. Make: Finolex/Prince/Kisan/Supreme/SFMC
Supply and fix rotational moulded polyethylene water storage tanks 750 litres capacity with inlet connections, three layer (cylindrical or vertical with closed top) HDPE with ISI marked, hoisted and fixed in position either inside or out side of the building, including fixing accessories and connecting up pipes securing access covers including taking down existing tank etc complete all as specified and directed by Engineer-in-Charge Make : Sintex / Polycon, Jaipur / Rotex / Infra
Supply and fix in repairs Ball Valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed of 25mm bore complete all as specified and as directed by Engineer-in-Charge (Minimum weight - 142 gms) Make : Jaypee/GMP/Neta/Zoloto/Prayag/Symet
Supply and fix in repairs gun metal gate valve, 25mm bore, with iron wheel head, screwed both ends for iron pipes, ISI marked and fixed with suitable size of new union complete all as specified and as directed by Engineer-in-Charge. Make : Leader/Zoloto/Seiko/Sant/Soma
Material and labour for providing Anti-termite Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing Anti-termite Treatment Treating to the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed by Engineer-in-Charge.
Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigments, set, jointed and pointed in neat cement slurry in floors including 20mm thick screed bed in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make- (a) M/S Mehatab Tiles, Indore (b) National Tiles(c) Bharat Tiles and Engg Coy, Bangalore (d) Modern Tiles and Marbles Bangalore (e) M/s NITCO, Mumbai (f) Ultra (g) Duracrete
Material and labour for machine pressed precast concrete interlocking paver block lacquer finish of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including 25mm thick crushed stone sand cushioning including watering and consolidation below paver block cushioning complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur
Supply and fix Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, complete all as specified and as directed by Engineer-in-Charge. Make- (a)Shree Lakshmi EnggWks, Bangalore (b) M/S Prakash & Co, New Delhi (c) M/S Senthil Rolling Shutters &Engg Co, Chennai (d) M/S Swastik Rolling Shutters, Mumbai (e) M/S Jayaraj Industries, Chennai (f) M/S Darshan Rolling Shutters, Nasik (g) M/S Shalimar Rolling Shutters & Co. (h) M/S Ganesh Rolling Shutters Hyderabad (j) M/S Shaparia Dock & Steel
Material and labour for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe- 410W, Gde 250 quality complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 75mm thick plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in flooring & finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply and fix plain solid straight chowkats, second class hardwood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints including making good frame in cement concrete complete all as specified and as directed by Engineer-in-Charge.
Disconnecting of PVC water storage tank of capacity exceeding 500 ltrs and not exceeding 1000 ltrs, setting aside (or lowering if required) for repairs, cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting if required reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge.
Disconnecting of PVC water storage tank of capacity exceeding 1000 ltrs and not exceeding 2000 ltrs, setting aside (or lowering if required) for repairs, cleaning with bleaching powder and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc., and hoisting if required reconnecting and refixing in position including provision all necessary fittings etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing plain cement concrete 1:2:4, type B0 using 12.5mm graded stone aggregates mixed with water proofing compound at the rate of 2% by weight of cement as in levelling course of haunching, coping, and similar work over RCC roof surface and RCC over head tank top surface including rounded or chamfered on edges and formwork etc, laid in slope as required, finished even and fair etc complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately
Supply only integral water proofing compound ISI marked complete all as specified and as directed by Engineer-in-Charge. Make : Pidilite Industries Ltd, Taloja /Super Aquacem (India) Ltd /FOSROC/Siko/Dr Fixit
Material and labour for 10mm thick rendering with cement mortar 1:3, mixed with waterproofing compound, over roof concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. Note: Water proofing compound will be measured and paid separately
Material and labour for removing vegetation, trees, plants and shrubs etc in any position by cutting hole into brick wall / concrete surfaces (for removing the roots of trees/plants) area not exceeding 0.50sqm each and using acid to burn the all roots of tree/plants and making good disturbed surfaces with cement concrete 1:2:4 type B1, using 20mm graded stone aggregate mixed with and including water proofing compound @ 3% by weight of cement and including making good adjoining surface with existing finishes all as specified and as directed by Engineer-in-Charge. Note: The unit quoted rate shall be deemed to include WPC & necessary scaffolding as required.
Material and labour for providing plain cement concrete 1:3:6 type C2 using 40mm graded stone aggregate Nominal mix as in foundation, filling and mass concrete all as specified and as directed by Engineer-in-Charge.
Material and labour for mild steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS. 1161-1979 grade St-240, complete all as specified and as directed by Engr-in-Charge.
Material and labour for preparing old plastered/ unplastered surfaces including completely removing existing treatment and applying two coats of cement base paint on RCC OHT n.exc 30 metres height wall surfaces including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge and as per manufacturers instructions. Note :- The quoted Rate is inclusive of necessary scaffolding and connected items/equipment 's for painting of RCC over head watre tank n.exc height of 30 metres. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar
Material and labour for Building up the profile of structural members by using polymer modified mortar upto 20mm average thickness including levelling profiling work rate including following all process with material :- (a) Surface preparation of existing concrete components including grinding/rubbing carefully by grinder without damaging the existing concrete and debris removed outside MD area. (b) Providing & applying rust cleaner to existing corroded reinforcement of approved make (c) Providing and applying two coat of anticorrosive epoxy phenolic rebar protective system to existing as well as new reinforcement (d) Priming cum bonding coat of two component peroxide resin confirms to ASTM-C-882-91 including providing and inserting 10 mm mild steel shear key bars (minimum 3 nos per sqm), shear key fixing with drilling and epoxy grout wherever required, Scaffolding at any height & mixing, laying, levelling and finishing including curing and work shall be execute as per manufacturer instruction and from authorised applicator complete all as specified and as directed by Engineer-in-Charge. Note : All materials should be approved make such as Dr Fixit, Fosroc, Sika, Krishna conchem or equivalent.
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of pipe etc complete all as specified and as directed by Engineer-in-Charge.
Returning, filling in including spreading, levelling, watering and well ramming soil in layers not exceeding 25 cm thick complete all as specified and as directed by the Engineer-in-Charge
Removing excavated soil to a distance exceeding 1.5 Km but not exceeding 5 Km and depositing where directed outside MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for walling random rubble, uncoursed, well bonded, bedded and solidly headed built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour for extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought up to courses hammer dressing with maximum depression on face from straight edge held against the dressed surface n exc.40mm complete all as specified and as directed by Engineer-in-Charge.
Material and labour for providing Plain cement concrete 1:2:4, type B0 Nominal mix using 12.5mm graded stone aggregates as in coping and the like including weathering, slightly rounded or chamfered angles and throating, as directed including necessary form work for fair finished surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 15mm thick rendering in two coats (10mm + 5mm) with cement mortar 1:4 including dubbing out plaster in cement mortar 1:6 of any thickness on stone masonry surfaces/ brick or concrete surfaces, mixed with water proofing compound all as per manufacturers instructions & finished even and smooth complete all as specified and as directed by Engineer-in-Charge Note: WPC will be measured and paid separately.
Material and labour for raised pointing to random or polygonal rubble, uncoursed or brought up to course in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly plastered ceiling surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and as directed by Engineer-in-Charge. Make: Asian Paints (Tractor) / Nerolac Paints /Jenson & Nicholson / Shalimar Paints
Dismantling of wall and ceiling board (fibre, pulp, insulation etc) or insulation boards/slabs/blankets of any type & any thickness including cover fillets and removal of rubbish outside of MD land complete all as specified and as directed by Engineer-in-Charge.
Material and labour for anodised aluminium snap grid frame work for false ceiling confirming to designation 3600 in IS-207-10985 including all ceiling cleats 4 mm dia GI wire suspender with necessary main tee 35.00x23.50x1.50mm , cross tee and wall angle of size 23.50x23.50x1.5 mm with 605x605 mm grid system complete all as specified and directed by Engr-in-Charge.
M&L PVC false ceiling of 10mm thick PVC insulation panel with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of aluminium/ GI /MS as per specification & drawing complete all as specified and directed by Engr-in-Charge. Make- (a) Rajshri (b) GIZA (c) Echon (d) Accucel
Material and labour for rolled mild steel sections as in roof trusses (framed), trussed, purlins, crane gantries, rails, and fastenings and heavy bracket framing, (beam, tee, angle, channels or flat sections) including notching, drilling, fitting, riveting and / or welding or connecting with bolts and nuts (including rivets or bolts and nuts) conforming to Fe 410 W Gde E- 250, Quality B complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of old painted steel surfaces over 10 cm width or girth and applying one coat of synthetic enamel paint with necessary scaffolding / shuttering etc complete all as specified and as directed. Make : Asian paints/ Nerolac paints/Berger paints/ Shalimar paints/ Dulux
Material and labour for 100mm thick plain cement concrete 1:2:4, type B1, using 20mm graded stone aggregate as in flooring / hard standing / path, in alternate bays, area not exceeding 2 Sqm in each panel & joints filled with bitumen mastic (1:3) & finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 10mm thick rendering with cement mortar 1:4 including dubbing out plaster in cement mortar 1:6 of any thickness on fair faces of brick or concrete surfaces and finished even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for rendering 5mm thick in cement mortar 1:3 including dubbing out plaster in cement mortar 1:6 of any thickness on fair faces of concrete surfaces of ceiling and finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Supply and fix hold fast, framed brackets for swan neck frame on top of boundary or any other uses of angle or tees with web flanges cut to a shape,drilled and counter sunk for screw,incl bending and welding angle asnecessary plates,riveting etc, confirming to Fe-290 Grade E-165 complete including all as specified and directed by Engineer in charge.
Material and labour for plain cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in bed plates, concrete block for hold fast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 30mm thick flush shutter, solid core construction with block board core and plywood face panels, commercial type on both side all as specified and as directed. Make : M/s Goel Brothers, Raipur / M/s Pioneer Timber, Chandigarh / M/s Goyal Industries, New Delhi / M/s Jain Doors pvt Ltd, Haryana / M/s India Wood & Wood Pdts, Mangalore / M/s MP Wood Products, Indore / M/s A1 Teak Products, Indore / M/s Jain Wood industries( Brand : JAYNA)
Supply and fix stainless steel butt hinges, medium weight, 100mm size all as specified and directed. Make : Classic/ Shalimar/ CLIF/ARGET
Supply and fix aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed by Engineer-in-Charge
Material and labour for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation for pole, mass filling and finished even and fair complete all as specified and as directed.
Supply and fix in repairs UPVC (SWR) floor trap outlet dia 75mm, plain with gratings including jointing etc complete all as specified and as directed by Engineer-in-Charge. Make : Prince / Finolex / Supreme
Supply and fix in repairs tubular towel rail aluminium anodised 20mm dia, 'D' type, 60cm long between flanges fixed to walls with screws complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repair vitreous china squatting pan Orissa pattern of size 580 x 440mm white with integral foot rest, 'P' or 'S' trap front and back inlet and including connection to trap and to flushing pipe, anti syphonage pipe etc (excluding flushing cistern & flush pipe) all as specified and as directed by Engineer-in-Charge. Make : Cera/Hindustan/Parryware/Jaguar/Hindware/Johnson
Supply and fix flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low level cistern complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs CI nahani trap 100mm with grating including jointing with waste pipe, fixed in cement concrete 1:2:4 type B1, Complete all as specified and as directed by Engineer-in-Charge. Make : NECO/Sighal iron Foundry/Bengal iron Co/Dhatu Udyog/Kapilansh
Supply and fix in repair PVC connection, 15 mm size 450 mm long both end socket fix complete all as specified and as directed by Engineer-in-Charge.
Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever CI brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste pipe etc complete all as specified and as directed by Engineer-in-Charge. Make : Diamond / Nirali / Neelkant/Parryware/Prayag
Supply only 32mm, waste fittings, brass chromium plated for glazed ware sink, basins, etc. with long screw shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engineer-in-Charge.
Demolition of cement concrete unreinforced in roof, floors (other than ground floors), beams, staircase landing, chajjas and similar suspended work of any description and on any position complete all as specified and as directed by Engineer-in-Charge.
Material and Labour for reinforced cement concrete(Nomonal mix) 1:1.5:3 using 20mm graded stone aggregates as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs, chajja and in shelves etc complete all as specified and directed by Engineer-in-Charge.
Material and labour for 20-25 mm thick machine cut cudappa stone slab in jambs / cills / soffits of window / ventilator as in frame work to support for aluminium section, laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over backing coat 10 mm thick in CM (1:4)complete all as specified and as directed by Engineer-in-Charge.
Material and labour for machine cut Kota stone slab flooring 20-25 mm thick over and including cement screed bed 15 mm in Cement Mortar (1:4) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engineer-in-Charge.
Supply and fix 4.0mm thick black glass, ordinary quality in square exceeding 0.5 Sqm in each pane, fixed in aluminium windows complete all as specified and as directed by Engineer-in-Charge. Make : Modiguard/Atul/Kohinoor/Swastik/Saint Gobain
Material and labour for non skid coloured ceramic tiles (joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including screed bed of 15mm thick in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles
Material and labour for non skid coloured ceramic tiles (joint free), 7 to 8mm thick (square/rectangular), area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles
Material and labour for for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
Supply and fix galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.
Supply and fix razor type concertina coil, SG hot galvanized spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge Note :- The length shall be measured along the centre-line of the perimeter of fencing.
Supply and fix floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring 150mm size, complete all as specified and as directed. Make : Classic/ Shalimar/ CLIF/ARGET
Material and labour for coloured glazed ceramic tiles, for skirting, dado, risers, on vertical surfaces etc, set and jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge. Make: M/s H R Johnson / M/s Kajaria / M/s Somany Tiles Ltd / M/s Orient bell / M/s RAK tiles
Demolition of the existing brick coba treatment over roof slab completely including thoroughly cleaning complete all as specified and removal of the demolished material to outside of MD land complete all as specified and as directed by Engineer-in-Charge.
Dismantling of false ceiling / wall cladding sheets of any description including cover fillets etc complete all as specified and as directed by Engineer-in-Charge
Supply and fix anodised aluminium snap grid frame work for false ceiling conforming to IS 733, IS 737 and IS 1265 using T section of sizes ( 25X25 mm , 1 mm thick ) in square pattern of grid sizes (600 X 600 mm) framework to be supported by hangers 6mm dia. G.i. ( upto 1200mm length ) adjusting levelfixed to roof slabs by means of ceilling cleats made out og G.I. (upto 1200mm length ) adjusting level fixed to roof slabs made out of G.I. Flat 40 X 3 mm size 60 mm lonfg and expansion hold fasterns 12.5mm dia 40mm long complete all as specified all as specified and as directed by Engineer-in-Charge. Make: Gypsum board /Arm Strong/Ramco/Bisan
Material and labour for brick work with sub class 'B' bricks, straight or curved on planto any radius 1/2 brick thick wall built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-
Taking down shutters of any description exceeding 1 sqm but not exceeding 2 sqm each including fittings & removing clear off site after credit for the same is recovered by dept complete all as specified and as directed by Engineer-in-Charge.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out, in hard/dense soil returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, and removing surplus soil to a distance not exceeding 50 m and depositing where directed and making good the disturbed surface complete all as specified and as directed by Engineer-in-Charge.
Dismantling Asbestos cement (corrugated, semi corrugated, etc.) sheets in roof coverings including ridges all as specified and as directed
Note: Deduct Credit for demolished / dismantled material of Rs. (-) 72,599.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'
Chaudhary Enterprises
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .