Providing PUF Insulated roofing panel arrangements additional first floor class room at karumbalai middle school in ward 31

Amount

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid). For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing , etc.

Reinforced cement concrete 1:1 1/2 :3 (One cement One and half sand and three aggregate) using 20mm machine broken gauge bard granite jelly for RCC worksthe rate excluding the cost of reinforcement grills,centering and shuttering etc., complete in G.F

Supplying fabricating and placing in position of MS grills for reinforcement rate inc. the cost of steel for all works (the rate to include cost of binding wire also). Below 16mm Dia

Plastering with Cement Mortar 1:5 (One cement and Five Crushed stone sand ),12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Brick work in CM 1:5 (one cement & Five sand) using II class ground moulded bricks of size 9"X43/8"X 23/4" standard specification including finishing, curing, etc., complete complying with standard specification (Masonry projections wherever necessary for obtaining required elevation shall be done without extra cost) - Ground Floor

Supplying and laying in flooring with Polished Shahabad Stone Slabs 20mm thick with Machine Cut Edges of size below 2'0"x 2'0" laid over base layer of cement mortar 1:2 (one cement and three sand) -20mm thick and applying cement slurry & pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing in position M.S Steel framed weldmesh grill using 35x 35x 6mm angle for outer frame with 25 x 5 mm flats stiffeners welded horizontally an vertically in both direction and using 3"x 1" and 6 x 10 Gauge weldmesh with necessary locking facilities and hinges including cost of red oxide primer etc Complete

Providing and Fixing for 50mm PUF Insulated Roofing Panel is a type of sandwich panel designed for roofing applications, consisting of two metal sheets (usually steel or aluminum) with a Polyurethane Foam (PUF) core in between. These panels are engineered for thermal insulation, waterproofing, and fast installation — perfect for industrial, commercial, and even residential buildings.

Painting Two coats with ready mixed New Wall Surface Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m

Painting two coats with Ready Mixed Enamel Paint over the New iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVC insulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switch with continuous earth wire connection of 14 SWG TC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications. SD 23

Supply and Fixing for LED OUTDOOR FITTINGS (LIGHT EMITTING DIODE) HIGHER END etc Complete 30W LED Street Light Fitting with LED etc Complete

Supply nad Fixing for 4’ 18W Crystal Glass LED Tube Light Fitting including Labour Charges etc Complete

Supply and Fixing for AC Ceiling Fan complete 1200mm (48”) Sweep with 300mm Down Rod (without Regulator) (Higher End) Etc Complete.

Supplying, fabricating, erecting and fixing Calcium Silicate Board False Ceiling upto a ceiling height of 4.5m from floor level Using Perforated Sheets (10mm thick)

Add GST 18%

BASKARAN T (BID ID -1503271)