Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹43.8 LAccepted-AOC BASTI GOVINDPURA SIMBAL MORH MAKHANPUR GOJRAN JAMMU J K 181101 | JAMMU | JAMMU AND KASHMIR | 181101 | L-1 | Accepted-AOC Being lowest bidder | |
| 2 | L-2₹44.0 L+₹23,614.81 (0.54%)Rejected-Finance | L-2 | Rejected-Finance Other than lowest bidder | |
| 3 | L-3₹46.7 L+₹2.9 L (6.66%)Rejected-Finance | L-3 | Rejected-Finance Other than lowest bidder | |
| 4 | L-4₹46.8 L+₹3.0 L (6.77%)Rejected-Finance | L-4 | Rejected-Finance Other than lowest bidder |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
9 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Jammu
GE Jammu c/o 56 APO Pin-900277
REPAIRS TO ROOF, SHAFT AND CHAJJA ALONGWITH CONNECTED ITEMS OF CERTAIN BUILDING AT MIRAN SAHIB UNDER GE JAMMU
2023_MES_623799_2
GEJC-69/2023-24
Open Tender
Civil Works
Item Rate
150 days
AOR of GE Jammu
Please refer Tender Documents
8 documents required · 8 mandatory
₹500
GE Jammu
₹1 L
Yes
24 Jan 2024
20 Dec 2023
11 Jan 2024
20 Dec 2023
9 Jan 2024
27 Dec 2023
Amount
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing waterproofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including waterproofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminuous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with overlaps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for cement concrete tiles 25 cm x 25 cm x 20-22mm thick, machine pressed, set, jointed and pointed in neat cement slurry as in floors / terraces over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.
Material and labour for provision of roof treatment with polymeric water proofing membrane all as given below: - (a) Taking down existing waterproofing treatment and cleaning roof surface by washing and rubbing etc. and removing the material retrieved to a distance not exceeding 500 m where directed. (b) Material and labour for plastering 10mm thick in CM 1:3 using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge. (c) Applying a coat of bituminous primer conforming to IS : 3384-1986 @ 0.25 Iitres/sqm on prepared surface and allowed to dry. (d) Applying and laying 3mm thick APP membrane having non oven polyester matt at core and covered with high quality polymeric asphaltic protected thermo fusible HMHDPE film on both sides with over laps 10cm and 15 cm at longitudinal and transverse direction respectively and sealed by flame, sealing all overlaps complete including treatment at all junctions and corners. The membrane shall be torched into groove on vertical plane and groove sealed with cement mortar (1:3). (e) Material and labour for applying two coats of aluminium paint on membrane surface complete all as specified and directed.
Material and labour for plastering 10mm thick in cement mortar (1:3) using 100% coarse sand on roof surface including water proofing compound as per manufacturer's instructions and as directed by Engineer-in-Charge.
Supply and applying two coats of undiluted thick coat of acrylic reinforcement liquid applied elastometric waterproofing membrane with ultravoilet resistant properties and solar reflective properties over one coat of primer (3:1 water dilution) before applying second coat, insert smart care roof tape corner/joints and allow it to dry then apply furthar coat complete all as specified and directed. Note: - Every coat time gap should be minimum 6 hours.
Supply only liquid water proofing compound complete all as specified and as directed.
Material and labour for cement concrete (1:2:4) type B-1 (using 12.5mm graded crushed stone aggregate) as in roof kerbs and coping rounded or chamfered on edges complete all as specified and as directed.
Demolition of brick work / stone masonary built in cement mortar including all quoins, arches, pillars, but excluding precast concrete articles complete all as specified and as directed.
Material and labour for brick work with sub class 'B' old size brick straight or curved on plan exceeding 6 metre mean radius built in cement mortar (1:6) complete and fixed all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces over newly plastered surfaces finished even and smooth without using extra cement complete all as specified and as directed.
Material and labour for rendering 15mm thick in cement mortar (1:4) on fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished fair and even without using extra cement and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Material and labour for rendering 5 mm thick on ceiling or concrete surfaces in cement mortar (1:3) finished even and smooth without using extra cement including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key complete all as specified and directed.
Material and labour for rendering 15mm thick in cement mortar (1:6) on other than fair faces of brick / concrete surfaces in patches including necessary scaffolding upto three storey etc surfaces finished even and smooth without using extra cement including two coats of oil bound distemper over and including taking down cement plaster from brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of cement base paint over and including one coat of primer complete all as specified and as directed.
Material and labour for preparing new plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.
Material and labour for preparing new plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty on a coat of primer complete all as specified and as directed.
Material and labour for preparing old plastered surfaces and applying two coats of oil bound distemper over and including one coat of 1 mm wall care putty on a coat of primer complete all as specified and as directed.
Material and labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster (1:4) (1 cement : 4 coarse sand) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster (1:1/2:2) (1 cement : 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings including taking down old plaster complete all as specified and as directed.
Material and labour for cleaning of water storage tank 500 litres completely by removing all scale dirt/dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified and as directed.
Material and labour for cleaning of water storage tank 1000 litres completely by removing all scale dirt/dust of any description with chlorine complete all as directed at site including taking down and refixing of tank at the same place, any damage will be rectified by the contractor at his own risk and cost complete all as specified and as directed.
Hacking out old broken glass panes (any thickness, size, quality or description) from wooden / steel frames, glazed with putty or fixed with beads complete all as specified and as directed.
Supply and fixing 3 mm thick sheet glass ordinary quality and glazing with oil putty / beads in squares not exceeding 0.5 Sqm each pane complete all as specified and as directed.
Description all as per Ser item No. 21.00 here-in-before but figured glass, pin head type complete all as specified and as directed.
Demolition of concrete in ground floor not exceeding 15 cm in thickness below or above ground level including floor finish such as tiles of any thickness and any description etc. complete all as specified and as directed by Engineer-in-Charge.
Demolition of lean / cinder concrete filled in sunken slab, wire brushing the surface, cleaning all loose dirt by dusting / watering sunken portion of water closet, toilet etc and applying cement slurry @ 1.5 Kg per Sqm complete all as specified and as directed.
Dismanting floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
Material and labour for screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar (1:6) complete all as specified and as directed.
Material and labour for any coloured non skid jointless ceramic tiles 6 to7 mm thick, area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge complete all as specified and as directed.
Description all as per Ser item no 27.00 here-in-before but in vertical surfaces including 10 mm thick cement rendering / backing coat of cement in cement mortar (1:4) complete all as specified and as directed.
Material and labour for non skid tiles coloured exceeding 0.06 Sqm and not exceeding 0.11 Sqm, 6-7mm thick of any colour pattern and 1st quality as approved by GE in floor set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge complete all as specified and as directed.
Material and labour for coloured glazed ceramic tiles glossy finish of size 450 x 300 x 5-6mm thick in dado’s/skirting etc (1st quality) set and jointed in neat cement slurry and pointed in colored cement to match pattern, laying etc of tiles and shade, Colour shall be decided by Engineer-in-Charge including 10 mm thick cement mortar (1:4) complete all as specified and as directed.
Material and labour for 16 to 18mm granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including screed bed or bedding layer of mortar 20mm thick in cement mortar (1:6) and taking down old complete all as specified and directed.
Material and labour for machine cut kota stone slab flooring 18-20 mm thick over and including 20 mm thick cement screed bed in cement mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing complete including dismantling of old stone floor and PCC complete all as specified and directed.
Material and labour for 75mm thick cement concrete (1:3:6) type C-1 (using 20mm graded crushed stone aggregate) as in floor/plinth protection laid in suitable panels finished even and fair all as specified. 6mm joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 85/25 or 80/100 grade and three part of sand (all by weight) complete all as specified and as directed.
Dismantling stone slabs laid dry and tiles of any description or thickness in floors, aprons etc. and rubbish off the premises complete all as specified and as directed.
Material and labour for providing 75 mm thick plain cement concrete (1:4:8) mix, type D-2 (using 40mm graded crushed stone aggregate) as in sub-base, floor complete all as specified and as directed.
Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design and pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size / shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding / laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and as directed.
Taking down chowkhats or frames (without taking off shutters from the frame) not exceeding 1.50 Sqm each and removing from site complete all as specified and as directed.
Taking down chowkhats or frames (without taking off shutters from the frame) exceeding 1.50 Sqm but not exceeding 4 Sqm each and removing from site complete all as specified and as directed.
Taking down shutters from the frame of any description exceeding 1 Sqm but not exceeding 2 Sqm each leaf and removing from site complete all as specified and as directed.
Supply and fixing pressed steel frames of size 105 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.
Supply and fixing pressed steel frames of size 125 X 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate and one shop coat of primer etc complete and fixed all as specified and as directed.
Material and labour for cement concrete (1:3:6) type C-0 (using 12.5mm graded crushed stone aggregate) filling in pressed steel chowkhats bed block for holdfast and the like complete all as specified and as directed.
Supply and fixing 35mm thick second class hard wood panelled shutter plain, framed with panels of timber flat on both sides supplied and fitted to chowkhats complete all as specified and directed.
Supply and fixing 35 mm thick second class hard wood glazed and skelton shutters sizes of members as specified in SSR (Part-I) clause 8.24 (a), open, rebated and prepared to receive glass or gauge (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc complete all as specified and as directed.
Supply and fixing galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.
Supply and fixing 300 mm long aluminium anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding door bolt of extruded section complete all as specified and as directed.
Supply and fixing aluminium anodised barrel tower bolts 200 mm size and fixed complete all as specified and as directed.
Supply and fixing floor door stopper of aluminium alloy body and tongue 140 mm anodised with hard drawn steel spring fixed in floor complete all as specified and as directed.
Supply and fixing mild steel 300mm ordinary rat tail rod pattern springs including roller and roller plate fixed / welded to door frame complete all as specified and as directed.
Material and labour for preparing new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and as directed.
Material and labour for preparing primer painted steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.
Supply and fixing 30 mm thick PVC factory made panel door shutter (style) consisting of frame made out of mild steel tubes for top and bottom rail, Mild steel frame shall be covered with heat moulded wood grain printed PVC channel and 5 mm thick X 15 mm wide PVC sheet beading used inside style and rails and decorative PVC beading of 10x10 mm used instead of exposed portion of PVC sheet beading as in toilet / kitchen cabinet shutters complete all as specified and as directed.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5mm thick PVC sheet reinforced with mild steel square tube, in opening as per specification and drawing complete all as specified and directed.
Supply and fixing 100mm butt hinges stainless steel with stainless steel screw complete all as specified and as directed.
Supply and fixing aluminium anodised barrel tower bolts 150 mm size and fixed complete all as specified and as directed.
Supply and fixing 150 mm aluminium handle cast type complete all as specified and as directed.
Supply and fixing box type steel windows / Ventilator (factory made) outer frame made out of ERW tube 'P' section 65 X 45 X 25 mm and shutter of ERW tube 'P' section 50mm X 35mm X 20mm openable (double shutter) with glazed shutter on external side and gauzed shutter on internal side including steel pintel hinges steel handle 100 mm long mild steel tower bolt 02 no's on each shutter stopper of 'Z' section and its locking arrangement and mild steel hook and eyes suitable for fixing cooler / AC window complete all as specified and shown on drawings No CEPZTD-324/07 Sh 1/3 to 3/3 complete all as specified and as directed. Note: - The quoted rates shall also include: - (i) One shop coat of zinc chromate primer on all exposed surface and one coat of tar on the ends of steel surface in contact with bricks / concrete surface. (ii) 4 no's MS steel lugs made of 20X5 mm Iron flat 200 mm long. (iii) 10 mm Sq Bar grill / guard bar design as per drawing. (iv) PCC block for embedding lugs. (v) Two coats of synthetic enamel paint. (vi) Galvanized mild steel wire clothes power woven 0.46mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified.
Supply and fixing in repair powder coated aluminium window and ventilator shutters fixed type with / without sash bar, louvers, aluminium section weighing 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber packing, anodised aluminium snap beading and 5.5mm thick sheet glass, screws complete all as specified and directed.
Supply and fixing in repair powder coated three track aluminium window without sash bars, aluminium section weighing 0.55Kg/mtr including necessary jointing cleats, glazing clips, rubber packing, snap beading, screws and fittings as handle locking latch and stainless steel wire mesh and 5.5mm sheet glass complete all as specified and directed.
Supply and fixing in repair powder coated aluminium anodised grlll size of mesh 75x75x6mm fixed to window using U/Y channel of size 25x12mm and fixed with screws on aluminium section complete all as specified as directed.
Material and labour for providing water proofing treatment to sunken floors all as given below: - (a) Making fillet of size 25mm x 25mm at corner of slab and wall with polymer modified cementitious (PMC) mortar consisting of one part of tapecrete P-151, two parts of cement and 6 parts of fine sand by weight. (b) Sealing of joints of pipe with epoxy putty CICO POXY LC or epoxy mortar CICO POXY 2125. (c) Cleaning the concrete surface by brushing and watering and applying a coat of tapecrete P-151 Acrylic Polymer Modified cementitious slurry consisting of one part of TAPECRETE P-151 and two parts of cement by weight. The coating shall be carried out upto 300mm above FFL and shall be allowed to dry for 4-6 hours. (d) Appying a coat of TAPECRETE brush topping 1.5mm thick consisting of one part of TAPECRETE P-151, two parts of cement and two parts of silica sand by weight and cured to 2 days. (e) Applying 15mm thick plaster in CM 1:4 mixed with CICO super @ 100ml per 50 Kg cement on treated surface. (f) PCC 1:5:10 type E2 in sunken area.
Supply and fixing galvanised iron tubing of 15mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing galvanised iron tubing of 20mm bore medium grade including necessary fittings complete including taking down old pipe complete all as specified and as directed. ISI Marked.
Supply and fixing in repairs Bib taps, fancy type chromium plated (long body) with crutch or butterfly handle, screwed down, screwed for iron pipe of 15mm dia bore including necessary fittings complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repairs stop cock, chromium plated fancy type with long shank and cup (concealed type) screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe of size 15mm dia bore complete all as specified and as directed including cutting walls and making good surfaces. Note: - Including making good of surface as existing including tiling, color wash, distempering, plastering etc.
Supply and fixing in repairs chromium plated pillar taps, with capstan heads, chromium plated, screwed down high pressure, of size 15mm dia bore complete all as specified and as directed.
Supply and fixing in repair PVC connection 15mm bore and for 600 mm long with brass or PVC nuts and PVC washer complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 32mm bore complete all as specified and as directed.
Supply and fixing in repair PVC waste pipe 40mm bore complete all as specified and as directed.
Supply and fixing in repair soap dish chromium plated, screwed and fixed to wall complete all as specified and as directed.
Supply and fixing in repairs chromium plated tubular towel rail, 20mm dia 'D' type 60cm long between flanges complete all as specified and as directed.
Supply and fixing in repairs chromium plated shower rose with arm and not less than 125mm dia with or without swivel joints, including fixing to steel pipe complete all as specified and as directed.
Supply and fixing in repair 100mm dia steel grating with or without hole complete all as specified and as directed.
Supply and fixing in repair looking mirror with PVC moulded frame and hard board back white colour of size 450x600mm complete all as specified and as directed.
Supply and fixing in repairs PVC valveless syphon action type low level flushing cistern 8-10 litres capacity with inlet, ball valve, float valve, push button type handle including telescopic flush pipe 32mm dia of stainless steel with long bend of 32mm dia complete all as specified and as directed.
Supply and fixing in repair 1000 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repair 500 litre capacity rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) three layers hoisted and fixed in position including 20 mm float valve (PVC) and 02 no's GI tank nipple complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing in repairs sinks with drainage board made of stainless steel 1mm thick in kitchen with plugs, washers and waste, including bedding in cement mortar on wall including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410 mmx330 mmx160 mm complete all as specified and as directed.
Supply and fixing in repair stainless steel kitchen plate rack made out of not less than 1mm thick stainless steel sheet of size 750mm x 600mm x 250mm of approved pattern complete all as specified and directed.
Supply and fixing in repairs Vitreous chinaware wash hand basin white, flat back of size 550x400 mm excluding tap but including brackets fixing to wall and two No's 10mm dia 100mm long nut and bolt over brackets and chromium plated waste coupling complete all as specified and as directed.
Supply and fixing in repair water closet white vitreous china ware Orissa pattern of size 580x440mm with integral foot rest 'P' or 'S' trap front or back intlet incl provision of PCC (1:2:4) type B-1 and provision of cement concrete bedding and making good the dismantled surface and connection flush pipe (rate also including for taking off unhygenic old water closet) 15mm dia PVC connection 450mm long complete all as specified and as directed.
Supply and fixing in repair Vitreous China urinals, flat back size of 465x355x265 mm white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe brackets and chromium plated waste coupling complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 20 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Supply and fixing in repairs gun metal, globe or gate valve with iron wheel head, 15 mm bore, screwed both ends for iron pipe complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc. including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
Supply and fixing 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.
Supply and fixing 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, bends, Tees complete fixed to walls at any height complete all as specified and as directed.
Supply and fixing PVC (SWR) bends 110 mm radius complete all as specified and as directed.
Supply and fixing 110 mm PVC (SWR) junction single (T) equal / unequal complete all as specified and as directed.
Supply and fixing PVC (SWR) bends/shoes any radius of 75 mm dia complete all as specified and as directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 110mm dia complete all as specified and as directed.
Supply and fixing PVC (SWR) bends any radius provided with access door of 75mm dia complete all as specified and as directed.
NOTE NO 1: - Samples of materials as approved will be kept in GE's sample room. NOTE NO 2: - All fittings and fixtures mentioned above will be fixed to the satisfaction of Engineer-in-Charge and GE. NOTE NO 3: - Warranty certificate to the Engineer-in-Charge where ever applicable shall be submitted by the Contractor at the time of fittings.
PAKAYA BUILDERS AND DEVELOPERS PVT LTD
M/S M AAZAM CONSTFRUCTIONS
M/s Singh Constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .