UPGRADATION AND RENOVATION OF EXISTING INFRASTRUCTURE OF BLDG NO P42 COOK HOUSE AND DINING HALL OTHER RANKS OF 24 MARATHA LI UNDER GE MH AND RH KHADKI

Amount

Dimolition of stone slabs and tiles laided, beded and pointed in any mortar of any description or thickness in floors, aprons and walls complete all as specified and directed.

Material and Labour for 25 mm thick PCC 1 :2 : 4 type B0 (Using 12.5 graded stone aggregate) as in base of floors complete all as specified and directed.

Material and Labour for Non Skid coloured ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding area of each tile exc. 0.06 sqm but not exceeding 0.11 sqm etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick in CM (1:6) Screed bed or bedding layer of mortar for laying floor finishes complete all as specified and directed.

Material and Labour for Coloured Non Skid ceramic joint free tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

Material and Labour for Coloured Non Skid ceramic tiles 7mm to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tile laid over and including 15 mm thick screed in CM 1:6 complete all as specified and directed.

Material and Labour for Coloured Glazed ceramic tiles 350 x 250 x 7 mm / 450x350x7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including 10mm thick rendering in CM 1:4 complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level ) complete all as specified and directed.

Material and Labour for PCC 1:3:6 type C-1, (40mm graded stone aggregate) 75 mm thick as in plinth protection, Path, floor complete all as specified and directed.

Demolition of brick work or stone masonry or block masonry built in cement or cement/lime mortar complete all as specified and directed.

Material and Labour for PCC solid block masonry of blocks of type C1 (20mm graded stone aggregate) (1:3:6) wall exceeding 10cm in width & built in CM (1:6) complete all as specified and directed.

Dismantling of old Granite slab of any description complete all as specified and directed.

Material and Labour for 20mm thick Granite slab machine cut laid over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including screed bed 15mm thick in CM 1:4 complete all as specified and directed.

Material and Labour for 20mm thick Granite slab machine cut in dado/skirting over cement screed and jointed with grey cement slurry and pointed with whiteor colour cement with admixture of pigment to match the shade of granite stone including cutting and polishing complete including rendering of 10mm thick in CM 1:4 complete all as specified and directed.

All as per item No 13 above here in before but 20 mm thick Machine cut Cudappah stone in floor or in any position of any colour and shape complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.

Material and Labour for machine cut kota stone slab flooring 20mm to 25mm thick in flooring but one piece as in treads of straircase etc over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing moulding complete, over 15 mm thick screed bed or bedding in CM 1:6for laying floor finishes complete all as specified and directed.

All as item No 16 here in before but in one piece on vertical surface as skirting over and incl 10 mm thick rendering in CM 1:3 to receive kota stone/slab etc complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls,ceilings etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and Labour for 15 mm thick plastering in cement mortar 1:4 on external surface finished the surfaces for and even without using extra cement (upto any height) complete all as specified and directed.

Material and Labour for preparing the new surfaces and applying two coats on walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) upto 4 storey complete all as specified and directed.

Material and Labour for complete removal of existing treatment, preparing the surfaces and applying two coats on walls with Premium Acrylic Smooth exterior emulsion paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)® upto 4 storey complete all as specified and directed.

Material and Labour for 10 mm thick plastering in cement mortar 1:6 on fair faces of brick or concrete surfaces of walls including finishing the surfaces with a thin layer of sagol finish ( upto any height) complete all as specified and directed.

Material and Labour for preparation of new plastered surfaces and applying two coats of oil bound distemeper over a coat of alkali resistant primer over a coat of 3 mm thik wall care putty on plastered surface complete all as specified and directed.

Material and Labour for complete removal of existing finishes and applying two coats of oil bound distemper on walls over a coat of alkali resistant primer including 3mm thick wall care putty preparation of old surfaces on plastered surfaces prepratary to distempering complete all as specified and directed.

Material and Labour for complete removal of existing treatment on wall through any means, wahing rubbing down stopping of distamper and and painted surface of any description and apply a coat of putty not less than 1mm prepare the surface and apply three coats of white wash complete all as specified and directed.

Material and Labour for rendering 10 mm thick on concrete surface in CM 1 :4 as in ceiling etc complete all as specified and directed.

Material and Labour for preparation of new plastered surface and for applying three coats of white wash on ceiling complete all as specified and directed.

Material and Labour for complete removal of existing treatment on ceiling through any means, wahing rubbing down stopping of distamper and and painted surface of any description and pepare the surface and apply three coats of white wash complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) n. exc. 1.5.Sqm each complete all as specified and directed.

Supply and Fixing aluminium powder coated window sliding type (3 track) with frame size100x35x1.2mm and shutter 39.40x17.70x1.2mm with tow glass shutter & one mesh shutter incl necessary jointing cleats cleats, glazing clips, rubber packing, powder coated aluminium snap beading screws with 4mm plain float glass & 0.56 mm dia SS wire mesh, fittings etc including taking down old steel window complete all as specified and directed.

Supply and Fixing aluminium louvered ventilators of section size 100mmx25mmx1.50mm including frosted glass fixed in half portion & adjustable type louvers in another half and stainless steel wire mesh fixed type on outside frame etc. including taking down existing steel ventilatorcomplete all as specified and directed.

Supply and Fixing in repair toughen glass plain or forsted partition min 12 mm thick including necessary joining cleats/clips with screw of standard and approved size etc making good connecting surface complete all as specified and directed by EIC

Supply and Fixing Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet rinforced with MS Square tube suppling and fixing in opening as per specification and drawing complete all as specified and directed.

Supply and Fixing stainless steel Butt hinges 75 mm long, medium weight, cold rolled steel complete all as specified and directed.

Supply and Fixing Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail ; Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and Fixing Aluminium, anodised, barrel tower bolts of extruded section 125mm long complete all as specified and directed.

Supply and Fixing Aluminium handles, cast type, anodised size 125 mm long complete all as specified and directed.

Taking down chowkat without taking off shutter from frame exc 1.5 and n.exc 4 Sqm each complete all as specified and directed.

Supply and Fixing pressed steel frame of size 105mm x 60mm made out of 1.25mm steel sheet for doors with one or more rebates including necessary fixing lugs , hinges , lock strike plate etc complete all as specified and directed

Material and Labour for PCC 1:3:6 type C-0 using 12.50mm graded stone aggregate as in filling of pressed steel chowkat complete all as specified and directed.

Supply and Fixing 35mm thick factory made second class hard wood plain, framed , panelled shutter (2 panel) with lock rail and panel commercial ply or 12 mm veneered particle board of 9 mm B.W.P commercial veneering on both faces.The size of rail and stile as per IS:1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and Fixing in repairs 18mm to 19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screws to timber frame work as in shelves complete all as specified and directed.

Supply and Fixing in repairs cup board knobs 40mm size with all fixing screws etc complete all as sepcified and directed.

Supply and Fixing in repair 2nd class hard wood plain, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed in cupboards, almirah in any position including polish complete all as specified and directed.

Supply and Fixing in repairs 40mm width continuous (paino) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed.

Supply and Fixing in repairs 100 mm mild steel butt hinges medium weight, cold rolled complete all as specified and directed.

Supply and Fixing in repair locking arrangements of CP brass for aluminium doors i.e , by placing new lock 4 lever, vertcal type of 65mm , with triplicate key complete all as specified and directed.

Supply and Fixing in repairs aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt 150mm complete all as specified and directed.

Supply and Fixing in repairs galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixing to steel window with nut bolt complete, complete all as specified and directed..

Material and Labour for preparation to new wooden surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Material and Labour for preparation of new steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint of approved colour over a coat of red oxide primer complete all as specified and directed.

Material and Labour for preparation of old surfaces and applying one coat of synthetic enamel paint on old wooden surfacess of any description exceeding 10 cm width or girth complete all as specified and directed.

All as per item No 52 above but for applying one coat of synthetic enamel paint on old steel surfaces complete all as specified and directed.

Taking up or down 15 mm bore steel tubing and connections including disconnection of fittings and cleaning for refixing where required complete all as specified and directed.

Ditto-all as above item No. 55 but 25mm or 32 mm dia pipe complete all as specified and directed.

Supply and Fixing 15 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to concealed walls and ceilings or laid in floors complete all as specified and directed.

.---- do ---- all as per serial item No 57 above but except steel tubing complete all as specified and directed.

Supply and Fixing 25 mm bore of pipe medium grade steel tubes, galvanised with & including all fittings and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply and Fixing in repair rotational moulded polyethylene water storage tanks of capacity 2000ltr hoisted and fixed in position including 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed complete all as specified and directed. (rates includes for removing of old tank of any description).

Supply and Fixing Gun-metal, globe or gate valves 25mm bore, with iron wheel head, screwed both end for iron pipe and fixed in repair complete all as specified and directed.

Supply and Fixing in repair stop valves fancy type chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unionSupply and Fixingixed - bore dia of pipe 15 mm complete all as specified and directed. (Make : Jaquar/Cera)

Supply and Fixing 15mm dia fancy type long body Bib taps chromium plated cast copper ally with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. (Make : Jaquar/Cera)

Supply and Fixing in repairs vitreous china wash hand basin white size 550mm x 450mm / 560mm x 410mm oval type including CP pillar taps fancy type suitable for 15mm bore pipe waste chain but including brackets cutting for pinning in ends of brackets of erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed. (Make : Hindware/Perryware/Cera)

Supply and Fixing CP ,15mm bore push cock, screwed for iron pipe and fixed complete all as specified and directed.

Supply and Fixing in Vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) ,fixed in repair complete all as specified and directed. (Make: Hindware/Perryware/Cera)

Supply and fix in repairs PVC flushing cistern 10 ltrs capacity valveless, syphonic action type including inlet, ball valve, float, handle and brackets complete all as specified and directed. (Make: Commander/ Perryware or equivalent)

Supply and Fixing in repairs vitreous china wash down water closet pan (pedestal pattern), white excluding flushing cistern but including bolts, Flush pipe , seat cover and connection to drain (or out going pipe) and to flushing pipe, anti-syphonage pipe complete all as specified and directed.

Supply and fixing in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed.

Supply and Fixing in repairs two way bib tap 15mm chromium plated complete all as specified and directed. (Make : Jaquar/Cera or equivalent)

Supply and Fixing in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect fixing to 15 mm bore pipe complete all as specified and directed. (Make : Jaquar/cera or equivalent)

Supply and Fixing in repairs towel ring chromium plated complete all as specified and directed. (Make : Jaquar/Cera).

Supply and Fixing in repair, 110mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid/fixed in trench or floor complete all as specified and directed. Make:Prince Supreme.

Supply and Fixing in repair, 75mm thick PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in treanch or floor complete all as specified and directed. Make:Prince Supreme

Supply and Fixing PVC (SWR) bends of any radius with access door bore of pipe 75 mm complete all as specified and directed.

All as per item No. 76 above but bore of pipe 110 mm with access door complete all as specified and directed.

Supply and Fixing in repairs Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) (20 mm graded stone aggregate) complete all as specified and directed.

Material and Labour For PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Supply and Fixing Hasp and staple 75mm long, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed.

Supply and Fixing 75mm long Mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed.

Taking down / removing existing water proofing treatment from RCC roof slab including removal of plaster bed below felt / membrane and disposal of the same to distance exceeding 50m but not exceeding 100m as and where directed and Material and Labour for 10 mm thick screeding / rendering in cement mortar 1:3 on concrete roof surface, using Water Proofing Compound @ 3% by weight of cement, surface finished even and smooth without using extra cement complete all as specified and directed. Note: Water Proofing Compound shall be measured and paid separately.

Supply only intergral water proofing compound complete all as specified and directed.

Material and Labour for Cutting out cracks to "V" section in existing roofs or terracing, cleaning out wetting grouting with cement and sand slurry 1:3 complete all as specified and directed.

Material and Labour for cleaning the plastered /concrete surface with wire brush and applying water proofing treatment complete all as specified and directed as under:- (a) Apply a uniform coat of primer at 0.70 kg/sqm over cement plaster. (b) 3 mm thick and weighing not less than 3.6 kg/sqm Atactic Polypropylene Polymer (APP) modified bitumen - based prefabricated five layer water proofing membrane reinforced with non woven polyester matt black finished over compatible primer at 0.40 Ltr/sqm of density at 25 degree centigrade 0.87 to 0.89 kg/litre and viscosity 70 to 160 cps or cold sticker and torch application of membrane with 10 cm overlap both ways after necessary preparation of surface complete as per manufacturers instructions. (c) Apply two coats of bitumastic - aluminium paint over the membrane.

Dismantling wall and ceilihg boards (Fiber pulp, insulation etc or insulation boards any thickness including cover fillets complete all as specified and directed.

Material and Labour for false ceiling/wall panellint of plain gypsum board 12mm thick and frame made out of MSGI BPS grade , angle 24mm x24mmx0.43mm, 'T' section 24mmx25mmx0.30mm and main runner 'T' section 24mmx38mmx0.35mm complete with angle fixed to wall with rawl plug 100mm long of maximum 600mm c/c , hanging with 2.50/3.00 mm dia GI wire suspenders fixed to ceiling with 80mm long rawl plug providing 1 No per Sqm complete with painting two coats of plastic emulsion paint over one coat of primer and preparation of surface complete all as specified and directed.

Supply and Fixing POP decorative cornice 100mm size of approved design and pattern fixing along wall and ceiling juction complete all as specified and directed.

Supply and Fixing in repair 5 mm thick coloured of any selecetd design hollow PVC wall cladding strips interlocked to each other fitted to wall including PVC 'U' shapes at top/ bottom and PVC angles at windows/door openings all as per manufacturer’s fixing instructions complete all as specified and directed.

Supply and Fixing in repair tubular towel rail 20mm dia, D type 60cm long between flanges brass chromium plated, complete all as specified and directed.

Supply and Fixing in repairs powder coated aluminium brakets for curtain rods complete all as specified and directed.

Supply and Fixing in repairs 20mm Harrison rails, mild steel, chromium plated with fixing brackets, stops, rollers etc complete all as specified and directed.

Supply and Fixing in repairs drawer handles , mild steel , flush drop (65mm to 75mm grip) on 4 screw plate complete all as specified and directed.

Supply and Fixing Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

Supply and Fixing aluminium extruded section body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851mm to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

Supply and Fixing in repairs 150mm rubber door stopper of aluminium alloy body, anodised complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors etc complete all as specified and directed.

Material and Labour for point wiring complete with and including 1.5 sqmm (nominal area) single core multi stranded copper conductor PVC insulated but unsheathed FRLS cable 1100 Volts drawn into PVC concealed conduit including its accessories such as tee, bend ,elbow, socket and chisselling on wall complete and also making good the disturbed surfaces of wall / ceiling by cement mortar 1:4 including painting to existing surfaces and also including 1.5 sqmm PVC insulated and PVC unsheathed single core multistranded copper conductor FRLS cable 1100 V grade as earth wire including concealed MS terminal box ISI marked of suitable size / 3 mm thick hylam sheet on MS terminal box for housing switch, socket, regulators complete all as specified and directed. for the following:-

One light point controlled by one switch

One Exhaust/Ceiling Fan point controlled by one switch

One 3 pin 6 Amps socket outlet on Same board.

One 3 pin 6 Amps socket outlet on independent board.

All as per item No 2 here-in-before but wiring with 2.5 sqmm single core multi stranded copper condcutor,FRLS 1100 V grade PVC insulated but unsheathed single core for 16 Amps power point on independent board and 2.5 sqmm cable as earthwire complete all as specified and directed..

Supply and Fixing switch piano type 240 volts single pole one way 6 Amps complete all as specified and directed.

Supply and Fixing switch piano type 240 volts single pole one way 16 Amps complete all as specified and directed.

Supply and Fixing socket outlet 2 IN 1, 3 pin 6 Amps shuttered flush type complete all as specified and directed.

Supply and Fixing socket outlet 2 in 1, 3 pin, 6 and 16 Amps flush type complete all as specified and directed.

Supply and fix in repair ceiling rose surface bakelite with three terminals 2 Amp,240 Volt AC complete all as specified and directed.

Taking down old unserviceable fitting and Supply and Fixing wall mounted extruded aluminium housing high quality indoor batten LED tube 20 watt colour temperature 6500 K (4 feets long) lumen 2000 -3000, PF> 0.95, THD less then 10% diffused connecting with three core flexible copper wire from connecto to ceiling rose/angle holder as per existing site requirement complete all as specified and directed.

Taking down old unserviceable tube light fitting and Supply and Fixing LED light fitting mirror type with high output diffuser 2 feet, 10 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Taking down old unserviceable ceiling fan of any type, depositing it to MES store and Supply & fixing ceiling fan complete with blades, down rods, electronic regulator/REMOTE and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Taking down old unserviceable exhaust fan of any type, depositing it to MES store and Supply and fix exhaust fan, steel body AC single Phase. 230V heavy duty of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and Fixing distribution board factory made TPN 4- way vertical type with busbars & MCB TP as incoming, Double door metal type AC 415V suitable for fixing SP /TP MCBs as out going complete all as specified and directed. Note: Cost of MCBs will be measured and paid seperately.

Supply and Fixing distribution board factory made SPN 16 way in, 240 Volt, Double door metal type suitable for provisioning and fixing MCBs as out going and including SPN MCB 32 Amps as main incoming complete all as specified and directed. Note: Cost of MCBs will be measured and paid seperately.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 60 Amps and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed..

Supply and fixing miniature circuit breaker (MCB) of Double poles, current carrying capacity 32 Amps,AC, 240V, 10 KA 'C' curve in the MCB DB Complete with connection testing and commissioning complete all as specified and directed..

Supply and fixing miniature circuit breaker (MCB) of single poles, current carrying capacity 5 to 32 Amps,AC, 240V, 10 KA 'C' curve in the MCB DB complete all as specified and directed.

Material and Labour for sub main wiring in repair but using two single core multistranded PVC insulated multistranded copper conductor FRLS Cable of size 10 sqmm 1100 volt grade drawn into PVC Conduit concealed in wall of suitable size including 10 sqmm PVC multi standard copper conductor FRLS cable in green colour for continious earthing including chislling/cutting of wall, floor, making hole through wall & making good disturbed surfaces of wall/floor/ceiling to match with existing surfacecomplete all as specified and directed.

Supply and Fixing fix high efficent LED building security light fitting in repair 36 watt , 240 V, 110 lumen/Watt, PF> 0.95, THD less then 10%, made of pressure cast aluminium housing with high power LEDs, lens and toughned glass IP 66 connecting with three core flexible copper wire 0.55 Sqmm from connector to ceiling rose including GI pipe 32/40 mm light grade with bracket made out of 25x 3 mm strip complete all as specified and directed.

Material and Labour for earthing complete in repairs with galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of plate not less than 1.5 m below normal ground level connected to 4.0 mm dia galvanised earth lead wire by means of nuts bolts check nuts and GI washers including PCC pit in PCC 1:2:4 type B-1 RCC cover 20 mm dia (medium grade) GI watering pipe with funnel wire mesh and protection pipe of GI of suitable size upto 7.5 mtr length including charcoal black cotton soil as required at site to achieve the earthing result and common salt & charcoal including , excavation earth work etc in any type of starta complete all as shown in electrical plate No 3 as specified, GI wire suitable size and length for continuity earth wire from test point to main distribution Board complete all as specified and directed. Note: (i) Rate for achieving required depth by compressor machine if required is deemed included in item unit rate.

Material and Labour for Cutting chases, pinning in making good to facing where requried and painting in cement mortar 1:3 to ends or edges of landing steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 20 cm girth complete all as specified and directed.

Material and Labour for Rendendring 10 mm thick on fair faces of brick work or concret surfaces with cement plaster 1:4 complete all as specified and directed.

ShreHari Civil Enginneering and Contractors (BID ID -3314372)

M/S JAYCONSTRUCTION CO (BID ID -3314548)

N AND G CONSTRUCTION (BID ID -3308221)