Renovation and Interior fitout work for Startup India at Udyog bhawan, New Delhi

S NO DESCRIPTION AMOUNT AMOUNT

3.00 ELECTRICAL WORKS 1,045,710.98 640,603.00

7.00 IT WORKS , WIFI, EPABX 0.00 649,521.00

9.00 FIRE ALARM & PA SYSTEM 165,351.00 0.00

Total (DSR+MR) 15,340,000.01

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - CIVIL WORKS

S NO DSR/MR DESCRIPTION QUANTITY UNIT RATE AMOUNT AMOUNT

DSR 2023 VOL-1 DSR RATE NON DSR

1 FLOORING WORKS

CEMENT CONCRETE: Providing and laying in position CEMENT CONCRETE of specified grade exluding the cost of centring

1.01 and shuttering-all work upto plinth level.

4.1.8 1: 4: 8 (1 Cement: 4 coarse sand: 8 graded stone aggregate 40mm nominal size) 11.5 CUM 6812.00 78338.00

RAISED FALSE FLOOR: Providing and fixing removable raised/false access flooring with systemand its components of approved

make for different plenum height with possible height adjustment upto 50mm, comprising of modular loadbearing floor panels

supported on G.I. rectangular stinger frame workand G.I. Pedestal etc. all complete, as per the architectural drawings, as specified

and as directed by Engineer-in-charge consisting of:

(a) Providing at required spacing to form modular framework, pedestals made out of GI tube of thickness minimum 2 mm and 25

mm outer diameter, fully welded on to the G.I. Base plate of size 100mm x 100mm x 3mm at the bottom of the pedestal tube, G.I.

pedestal head of size 75mmx75mmx3.5 mm welded with GI fully threaded stud 16mm outer diameter with two GI Check nuts

screwed on the stud for level adjustment upto 50mm, locking and stabilizing the pedestal head in position at the required level.

The pedestals shall be fixed to the subfloor (base) through base plate using epoxy based adhesive of approved make or the

(b) Stringers system in all steel construction hot dipped galvanized ofrectangular size 570x20x30x0.80mm thick having holes at

both ends for securing the stringers on to the pedestal head using fully threaded screws ensuring maximum lateral stability in all

directions, the grid formed by the pedestal and stringer assembly shall receive the floor panel, this system shall provide adequate

11.54 solid, rigid support for access floor panel, the system shall provide a minimum clear uninterrupted clearance between the bottom

of the floor for electrical conduits and wiring etc. all complete as per the architectural drawings, as specified and as directed by the

(c) Providing and fixing Access Floor panel of 600x600x32 mm medium grade Filled Steel anti static high pressure Lamination of

800H grade (FS800H). Access Floor panel shall be steel welded construction with an enclosed bottom pan with uniform pattern of

64 hemispherical cones. The top and bottom plates of Steel Gauges: top 0.6 mm and bottom 0.7 mm fused spot welded together

(minimum 64 welds in each dome and 20 welds along each flange). The panel should be Corroresist epoxy coated for lifetime rust

protection and cavity formed by the top and bottom plate is filled with Pyrogrip noncombustible Portland cementitious core mixed

with lightweight foaming compound. The access floor shall be factory finished with Anti-static High Pressure laminate with Non

Warp technology upto 1mm thickness for superior adhesion and Surface flatness within 0.75mm.The panel is to withstand a

Concentrated Load of 363 kgs applied on area 25mm x 25mm without collapse in the centre of the panel which is placed on four

steel blocks. The panel will withstand and Uniformly Distributed Load (UDL) minimum 1250 kg/sqm and an impact load of 50kg all

complete as per the approved manufacturers specification and as per the direction of Engineer-in-charge. All specification must

be printed on the side of the panel to ensure the quality of the product.

11.54.2 450mm Finished Floor Height (FFH). 5 sq m 5977.35 29886.75

ALUMINIUM SKIRTING: Supply of 100mm Aluminium (Grade 6063) Skirting with 15 micron anodising In Natural Finish.

Thickness 1.30 to 1.50mm. Designed to conceal screws. Seamless finish. Complete with Rubber/ PVC Jointers and Gasket.

ENGINEERED WOODEN FLOORING: Supplying and Installation of engineered wooden flooring of total thickness 13 mm -16

1.04 MR mm, Toplayer PEFC controlled Core board PEFC controlled Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue 18 sq m 4797.00 86346.00

and groove Length Uniclic Width Uniclic Multifit Domestic use Conditions as per direction of engineer in charge.

VITRIFIED TILES: Providing and laying vitrified floor and wall tiles in different sizes (thickness to be specified by the

MR manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades,

1.05 laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including

grouting the joints with white cement and matching pigments etc., complete.

MR Size of Tile 1200x600 mm 45.4 sq m 2056.00 93342.40

b MR Special Subway Tile 10 sq m 3563.00 35630.00

CARPET TILES: Providing and laying carpet tile flooring. Carpets shall be of Type 6 nylon loop pile carpet tiles/Plank. The carpet

shall have sufficient gauge (1/10 ~ 1/12) with sufficient stitches (10~13) per inch. The carpet shall be solution dyed fibre content or

with injection printing technology. The carpet shall have the pile height ranging from (2.0 ~ 3.0) mm with average density higher

than 4500 Oz/ cubic yard. The total thickness of the carpet tile shall also range from (5.5 ~ 6.0) mm.

IPS FLOORING: 52mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete

1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12mm thick cement hardener

1.07 11.4 consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound 150 sq m 978.45 146767.50

mixed @ 2 litre per 50 kg of cement or as per manufacturer's specifications. This includes cost of cement slurry, but excluding the

cost of nosing of steps etc. complete.

TOTAL FLOORING WORKS 254992.25 518198.4

2 FALSE CEILING WORKS

1 Digitally signed by AMIT

GYPSUM BOARD CEILING: Providing and fixing false ceiling at all height including providing and fixing of frame work made of

special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS

: 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed

to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed

with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5

2.01 12.45 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall

be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long

G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long,

the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230

mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x

25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with

recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both

12.45.1 12.5mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) 86.25 sq m 1355.80 116937.75

LOUVERED WOODEN FALSE CEILING & WALL PANELS: Providing and fixing CUSTOM Channeled woodwork ceiling

panel600 DENSITY / fire Test certificate as per BS_476 part 7) acoustic wall panel of width of 192mm with finishing of 15 mm

thick Grooved wooden acoustic panel of size 2400 mm, Groove Size 3mm at an RANDOM interval of 13MM,21mm,42MM, and28

mm , the wooden acoustic panels to be backed with black acoustic fleece with NRC of 0.6 the edge of panel shall be Tongue and

groove to be fixed with clips on The grid should be of “BOLLARD” make with 24mm wide T - section flanges color white. The

2.02 MR main T runner with length and size of 24X38mm made from .30mm thick sheet spaced at 1200mm Centre to Centre and cross T 33.96 sq m 3426.00 116346.96

of size 24X38mm made of .3mm thick of 1200mm long spaced between main T at 600mm center to centre to form a grid of

1200X600mm and second cross T of length 600mm and size 15X38mm made of 0.30mm sheet to be interlocked at middle of the

1200X600 mm panel to form grid of 600X600mm and wall angle of size 19X19

The grid frame should be suspended from ceiling using M-6 fastener, L Cleat, threaded rod of galvanized steel 6mm dia along

with L shape Grid holder which will be fixes to Main Runner at spaced of 1200 c/c.

Formaldehyde: E1-M1

GYSPUM DESIGN PANEL : Providing and fixing suspended false ceiling- Danoline - : Designpanel Size 900X2400X12.5mm

perforation tangent 4mmx14mm,10/20 mm C/C with 15.8 % perforation and NRC upto 0.70: Micro perforation of glass-fibre

reinforced gypsum material, which includes providing and fixing GI perimeter channels The furring should be min. 60 mm wide at

the short end joints (if wood is used; the steel furring can be min. 45 mm). The remaining furring can be 45 mm wide. of size 0.55

mm. Thk. having one flange of 20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw

fixed to brick wall/ partition with help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of

size 45 mm,0.9mm thk with two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x

10mm x 0.55mm thk fixed to soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of

51.5mm & two flanges of 26mm each with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and

in direction perpendicular to the intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling

section with 25 mm dry wall screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either

with screw driver or drilling machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush

look with jointing compound.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or

WAVE BAFFLE CEILING: To Supply & Install Custom made Vertical curve Polylam Blades Ceilings as per the design intent. The

vertically curve baffle system POLYLAM exhibiting space- delineating characteristics. The system comprises vertically curve

baffle with 75-150mm deep curved rafters manufactured out of 1.2mm Aluminium to provide wave effect. The module for fixing

baffle shall be 150mm centres as per design requirement. The carrier rails run perpendicular to the baffles axis and can be

2.04 MR mounted with M6 threaded rods using technical approved fasteners as per EN 13964 standards. The individual baffle lengths 5 sq m 7538.00 37690.00

between 1200- 2400 mm can be selected. Baffles lengths less than 1500mm required two carrier rails mounted at the baffle ends.

Baffle longer than 1500mm require additional carrier rails mounted in the centre. Finish RAL Powder Coated.No Pre Coated

products shall be accepted. The spacing of the grid angles is according to the requirements of DIN 18168 and DIN EN 13964 and

quality controlled to ISO 9001:2015 approved by SIS & LEED certification by Indian Green Building council (IGBC).

GYPSUM ACOUSTIC PERFORATED GRID CEILING 300X1200 : Providing and fixing suspended Demountable acoustic ceiling

in visible, but flush grid system -Knauf Danoline : Belgravia ( with technical panel ) 300 x 1200 x12.5mm flush grid system with

high grade, glass fibre reinforced, acoustic, white painted, gypsum tile with acoustic perforation as Unity Round 4mm c/c 10mm .

Material: Perforated plasterboard

Board type: Ceiling tile

Length x width x thickness: 300X1200X12.5mm

2.05 MR Edge: E, recessed grid system ( 8mm recess) 34.4 sq m 3152.00 108428.80

Perforation: Unity 4mm round

Perforation percent: 11.0%

Surface: Water-based acrylic paint

Colour: White NCS 0701 Y24R, RAL 9003; gloss 5

Attachment: 15mm T-grid system

Edge section: 20x24 mm angled profile, 15+15 x 8+25 mm cornice moulding

2 Digitally signed by AMIT

GYPSUM LOUVERED CEILING: 12.5x600x600 high grade, glass-fibre reinforced, acoustic, gypsum panel with acoustic

perforation as Unity 3 - square 3.5x3.5mm c/c 8.33 type U3. The ROLD 12 tiles with Strip shall be screw fixed on minimum 60mm

wood or steel furring. The ROLD 12 with strips tiles are with edge B+ and are pre-painted ready for installation on site. ROLD 12

screws, type Torx 15, with white-painted head are used for screw-fixing. The acoustic ROLD 12 tiles are furnished with a grey

(white) absorbent felt backing with an airflow resistance of 330-460 Ns/m³ (DIN 53887).Colour - White, NCS 0701 Y24R, gloss 5

(standard) or re-paintable at site with water based acrylic paint.Closest match for repainting: NCS 0700/RAL 9003. Paint Type -

Waterbased acrylic emulsion paint including titanium for hygienic indoor climate. Light Reflection: 69.2% according to DIN Norm

5036.Acoustic Property - αw: 0.95; NRC: 0.90.Fire Class - A2-s1,d0 .Suspension - The ROLD 12 must be screw fixed to furring of

METAL BAFFLE CEILING : Providing & fixing POLYLAM®• is vertical & horizontal baffle system, exhibiting space-delineating

characteristics.

The system comprises baffles 50mm wide & 150 Deep thickness of minimum 0.5mm GMS, installed at 150mm C/C . The C

shaped shaped carrier rails run perpendicular to the main baffles profiles. Individual baffle lengths between 300 and 2400 mm can

be selected. Baffle are supplied with the end cap matching the similar finish of baffle. Tolerances according to TAIM, DIN EN

13964 and quality controlled to ISO 9001:2015 approved by SIS. Substructure for POLYLAM®• Vertical baffle system consisting

2.07 MR of C shape carrier of minimum 1.2mm thick installed perpendicularly to baffles, same was hanged to wall with the help of wall 5 sq m 6853.00 34265.00

anchor fasteners. Baffles to be connected perpendicular to C shaped carriers with the help of baffle hanger brackets. The primary

profiles must be connected to one another with longitudinal splice connectors. C shaped baffle carriers to be installed at maximum

distance of 1200mm. in a length of 2400 mm baffles.Manufacturer shall have the fully automatic powder coating system with

power and free conveyorize 3mtr/minute capacity. Powder coating plant shall be equipped with latest modern technology with fully

automatic inline Pre-treatment using nano technology, Inline automatic water Drying system after pre-treatment. Mode of

Measurements: Measurements shall be wall to wall without any deductions for lights, diffuses, columns etc.

GYPSUM TILE FOR WET AREAS ( TOILETS & PANTRY ) : Providing & fixing of DANOTILE , high humidity resistant, made of

special high grade, glass fibre reinforced gypsum, 600x600x9.5mm thick, 30 min fire rated* (third party certificate ), A2,s1-d0,

mounted on T-24 exposed Grid suspended ceiling system which includes Main Tee at every 600mm c/c and Cross Tee, 600mm.

Wall angle is then fixed along the perimeter of wall with screws (as per manufacturers specification). The suspension is done with

all accessories like Soffit cleat, leveling clips & wire rods as per design, drawings and architects instruction.The tiles are machine

laminated with non-toxic PVC free foil on the face side & red poleyethelene foil backing on the reverse side. Charachteristics :

2.08 MR The Tiles shall be: 11 sq m 1919.00 21109.00

• Manufactured from high grade non-combustible glass fibre reinforced gypsum board produced according to EN 520.

• Tested to meet the safety requirements of EN 14190.

• Tested in accordance with EN 13501-1 to achieve minimum fire classification A2-s1,d0.

• Resistant to 90% RH and short term exposure for higher humidity.

• Non hazardous and fully recyclable.

The entire work shall be done as per design, drawings and direction of engineer in charge.

PERFORATED GYPSUM BOARD CEILING : Providing and fixing suspended false ceiling- Danoline - : solopanel Size

1188X1998X12.5mm Globe perforation 8/18 with 8.7% perforation with NRC upto 0.6 : Regular round perforation of glass fibre

reinforced gypsum material, which includes providing and fixing GI perimeter channels of size 0.55 mm. Thk. having one flange of

20 mm and another flange of 30 mm and web of 27 mm along the perimeter of the ceiling, screw fixed to brick wall/ partition with

help of nylon sleeves and screws, at 610 mm centers. The suspended GI intermediate channels of size 45 mm,0.9mm thk with

two flanges of 15 mm each from the soffit at 900 mm centers with ceiling angle of width 25mm x 10mm x 0.55mm thk fixed to

2.1 MR soffit with GI cleat and steel expansion fasteners. Ceiling section of 0.55 mm thk having web of 51.5mm & two flanges of 26mm 11.5 sq m 2947.00 33890.50

each with lips of 10.5mm are fixed to the intermediate channels with help of connecting clips and in direction perpendicular to the

intermediate channel with centers of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm dry wall

screws at 300 mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or drilling

machine with suitable attachment. Finally the boards are to be joined and finished so as to have a flush look with uniflot.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

reduces concentrations of VOC’s like alcohol, aldehydes, ketons and esters as well as unpleasant odours from e.g. food or

LOOP CEILING: Providing & fixing LOOP® Type 2 system formed as an open metal ceiling with an open area of more than 50%

and to the flare [5mm] of the perforation pattern [RV-50-40] the ceiling has a three-dimensional visual effect and hides the insight

into the plenum. Bypassing the perforation, the S-shaped sides of the LOOP® interlock both the long and front side joint with a

non magnetic suspension, the elements are installed with a circumferential 1 mm joint, thus compensating tolerances in x and y

direction. The non-magnetic suspension system effectuates a self-alignment of the elements [puzzle effect]. The module size

2.12 MR 966x1115x1.0mm GMS is perforated with 60mm deep drawn holes .The substructure consists of a form perforated L profile 5 sq m 17000.00 85000.00

[U1040] as a lateral grid which is suspended from the ceiling with nonius adjustable upper and lower parts or with threaded rods

using official approved dowel plugs. The grid profiles are to be connected together at the ends by means of longitudinal

connectors [U 1041] [s of 333 mm perforated gypboard is then screw fixed to ceiling section with 25 mm dry wall screws at 300

mm centers to G.I. framing in perfect level. Screw fixing is done mechanically either with screw driver or drilling machine with

suitable attachment. Finally the boards are to be joined and finished so as to have a flush look with uniflot.

Cleaneo Technology - Air purification & Air quality.Active reduction of air polluants thanks to Cleaneo Technology effectively

3 Digitally signed by AMIT

LINEAR OPEN CELL CEILING: Providing and fixing of Starlum 9 linear cell ceiling made out of Aluminium. The assembled cell

ceiling panels shall be in size of 600x1200mm. The assembled cell ceiling panels shall made out of main blades in 9mm (W) x

40mm (H) in 1200mm (L), installed at 66.66 mm c.c. and cross connected to secondary blades in 15mm(W) x 37mm (H) in

600mm (L) with 240 mm pitch. The assembled cell ceiling panels are then clipped into U-94 carriers in GMS,coated in black

enamelled finished at 1200mm c.c. Wire clips shall hold the cell ceiling panels into the U-94 carriers. Once the U-94 carriers are

installed then primary angles made out of GMS, type U1040 are cross connected to the U-94 carriers at 1200mm c.c. for lateral

bracing The whole ceiling shall be suspended by M6 threaded rods installed at 1200mm c.c. The panels are fully downward

demountable / hinged from the proprietary U 94 carrier section using C 94 spring panels.The system should be in accordance with

Material class A2-s1, d0 according to EN 13501-01 “non-combustible”, as per the Direction of Arch-in-charge. The system will

meet fire retardant standards of BS 476: Part 6 & Part 7. Tolerances according to TAIM, DIN EN 13964 and quality controlled to

ISO 9001:2015 approved by SIS, LEED certification by IGBC.All panel modules must be hinge able through wire clips. Finish of

cell ceiling panels: Metallic silver in RAL 9006 & RAL 9016 White White colour.

TOTAL FALSE CEILING WORKS 116937.75 1270700.26

3 WALL FINISHES WORKS

STYLED GLASS DOOR: Supply & Installation of aluminium Door frame of 82X55mm and double glazed stile door frame of size

82x40 mm with necessary seals in natural anodized / black finish with specially designed Aluminium Hinges (5 Nos.) ) & Lever

Handle in Oval shape SS304 with SS 35mm Backset of 22mm Square Forend with Strike plate. Door should have Lock, oval

3.02 MR escutcheons, strike plate, EPC One Side Key other side knob-70mm and Geze Concealed Door closer with 12x20mm Sleek 7 Nos. 68529.00 479703.00

Track Channel with 320mm Small Arm length. Door should have glass combination of 8mm toughened glass+Airgap + 8mm

toughened glass and necessary seals to be provided all around the door frames along with drop down seal. Cost should be

inclusive of installation charges for Doors.

WOODEN DOOR FRAMES: Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought

9.1 framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall

be paid for separately).

9.1.1 Second class teak wood 0.0435 cu m 142949.70 6218.31

WOODEN BATTENS: Providing and fixing specified wood frame work consisting of battens 50x25mm fixed with rawl plug and

3.04 drilling necessary holes for rawl plug etc. including priming coat complete.

8.27.1 Kiln seasoned and chemically treated hollock wood 0.5 CUM 187277.65 93638.83

FLUSH DOOR SHUTTERS: Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative

9.21 type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with

vertical grains or cross bands and face veneers on both faces of shutters:

9.21.1 35mm thick including ISI marked Stainless Steel butt hinges with necessary screws 2.4 SQM 2392.65 5742.36

WOODEN LIPPING: Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush

door shutters (over all area of door shutter to be measured).

WOODEN DOOR LOCK: Providing and Fixing Dead lock Back set- 50 mm with Key Hole of approved make and model all

complete as per the direction of Engineer-in-charge.

GLASS FILMS: Providing & Fixing Frosted Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce

3.14 MR Sand-blasting effect on glass with customised designs, thickness of 2 mil (0.05mm) without adhesive & 3mil (0.8)with adhesive 14.4 SQM 1295.00 18648.00

having minimum tensile strength of 3.5 pound/inch at 73 F(0.6 kg/cm at 23 C). Adhesion after 24hrs of installation should be 4

pounds/inch (0.7 kg/cm) on Acrylic, Glass Polycarbonate: MCS warranty of 3yrs (if exposed to direct sunlight) to 15yrs (indoors) .

LACQUERED GLASS: Providing and fixing of 6mm thick annealed SGG Planilaque Evolution (premium GRIHA rated lacquered

glass from Saint-Gobain) of approved color by Architect/ Client / Customer, fixed with SGG ULTRAFIX (compatible neutral core

silicon/ double sided tape) on a perfectly leveled 12mm thick water proof marine plywood / MDF / Mineral fibre board which is

3.15 MR mounted on the RCC wall/any other structure. Lacquered glass must be made industrially (via curtain coating process); opaque (if 30 SQM 4317.00 129510.00

viewed against a support wall), coated with PU lacquer (50 micron thick); color consistency (measured by Minolta

spectrophotometer CM5081); highly durable (passes PERSOZ hardness test for minimum 220 oscillatios); humid resistant

(conforms to BS EN 1036 1999); environmentally friendly (no lead, no arsenic, no copper, noformaldehyde); appropriate recycled

content (12% post industrial/ 6% post consumer); compressive strenght (1000 MPa) & tensile strength (40 MPa), same as float

4 Digitally signed by AMIT

GYPSUM BOARD PARTITION: Providing and fixing partition upto ceiling height consisting of G.I. frame and required board,

including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120

gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm

thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm

length or suitable anchor fastener or metal screws with nylon plugs and the studs 48mm wide having one flange of 34 mm and

other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610

9.105 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with

3.16 suitable anchor fastener or metal screws with nylon plugs at spacing of 450mm centre to centre, and fixing of boards to both side

of frame work by 25mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300mm centre to centre. The

boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99mm width (0.9mm

thick having two flanges of 9.5mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to

metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle

beads at corners (25mmx25mmx0.5mm), joint finisher and two coats of primer suitable for board as per manufacturer's

75mm overall thickness partition with 12.5mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board

conforming to IS: 2095: part 3 (Board with BIS certification marks)

ACRYLIC SOLID SURFACE CLADDING: Supply & Installation of 12 mm thick Thermoformable Acrylic Solid Surface Sheets

(DuPont Corian/ Tristone/ Lotte), over a robust substrate made out of BWP/ Flexi Ply/ MS- Aluminum sections etc. as required, to

3.17 MR achieve stated design intent. ASS in 12mm thickness, shall be manufactured as per guidelines of ISO 19712. ASS sheets to be 22 SQM 10793.00 237446.00

cut, pasted and finished over the substrate as provided, to achieve smooth and seamless finish. Item cost include intend

adaptation, supply, freight and installation of ASS sheets to site, wastage, finishing, creating provisions/ cut-outs for accessories

and final placement of table. Work shall be done by company's authorized Quality Network (QN) fabricator, as per satisfaction of

WINDOW BLINDS : Providing & supplying of fabric venetian Window Blinds as per the approved sample, consisting of 3" vane

size having head rail, rotator rail and bottom rail made of aluminium alloy 6063-T6 PER ASTM B221 - 85 extruded profile, powder

coated and provided in standard natural white color. The rolling tube should be made up of aluminium alloy from extruded profile

of 34mm dia. The head rail dimensions should be of suitable size according to the length of head rail and space available and

finished with fabric cover matching with the louver fabric. The cassette should conceal the working mechanism rotary-clutch.

(White polycarbonate spring tempered rotary clutch which raises), lower and tilts the blinds. White polycarbonate limit assemblies

control vane over-rotation, located on either side of individual blinds. The room darkening fabric of Blind should be of anti-static

polyester vanes which have facings between two sheer layers (50 mm wide) to reduce glare. Sheer layers should be of white

100% knit polyester, the colors, textures and opacities as approved. The fabric shall be made of spun- bonded 100% polyester

fiber (having green guard certification) treated with soil & dust repellent requiring minimum regular interval cleaning. GREEN

PELMET: Fabricate and install pelmet made of 19 mm thick board, up to 300 mm high and in line with external glazing as per

details of Architect. Rate to include finishing exposed surfaces of the Pelmet with 1mm laminate.

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS

13.48A 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon

3.24 additives

New work (Two or more coats applied @ 1.43 litre/10 sqm) over and including priming coat of exterior primer applied @ 0.90

PLY : Providing and fixing plain lining with necessary screws/ nuts & bolts/ nails, including a coat of approved primer on one face,

3.25 9.140 fixed on wooden/ steel frame work, complete as per direction of Engineer-in-charge. (Framework shall be paid for separately)

12mm thick commercial ply conforming to IS: 1328 BWR type 150 SQM 1224.65 183697.50

5.5mm THICK FSP HDHMR BOARD: Providing and fixing in wall lining, partitions etc. Confirming to ASTM E-84-2021 class1 one

side 1mm decorative Lamination, having even grade low emission, high moisture resistance, fire resistance, borer, termite &

3.26 MR fungus resistance, green material and environmental friendly with necessary fixing arrangement and screws etc. , complete as per

direction of Engineer-in-Charge

5.5mm thick FSP HDHMR Board 125 SQM 576.00 72000.00

ALUMINIUM FRAME: Providing and fixing partition, frame work in 50x25x1.5mm Aluminium Section placed at 600mm centre to

3.27 MR centre both ways (horizontal & vertical) fastened to floor, ceiling and horizontal member. The item includes providing and fixing 150 SQM 1347.00 202050.00

50mm thick polyester synthetic insulation as insulation of 100 GSM.

3D ACOUSTIC PET WALL PANELLING :Providing and fixing Smart Acoustical Wall Panels with square edges made of

Polyester fiber substrate 12mm thick with acoustical properties and with an option of 12 colours as per the choice of the Architect/

Person in-charge, providing a minimum sound absorption level of 0.50-0.90 NRC, to be affixed to wall using Adhesive. The

3.29 MR material should adhere to Formaldehyde emission standards of GB18580-2001 class E1, asbestos-free, non-toxic, non-irritant and 35 SQM 3426.00 119910.00

recyclable. Material to have fire resistance as per B1 Chinese standards. The sheets to have density of 200 kg/m3 and weight of

2.0 kg/m2. The sheets to be made available as per the V groove design approved by Architect/ Person in charge(attached Pic).

Cutting to be in done by supplier using blade cutting as per requirement.

5 Digitally signed by AMIT

WOODEN LOUVERED PANELLING : Providing and Fixing of ACOUSTIC WALL PANELS. The MDF wall panels shall be

composed of Medium Density Fiber board (MDF) with a minimum density exceeding 710 kgs/m³, and they shall be covered with

PP foil of Renolit, Germany brand/make with a thickness of 120 microns. The adhesive used for affixing the panels must be PUR

(polyurethane) hotmelt glue, and the design of the panels will be as per the specifications provided by the architect. The

dimensions of the panels are 17-18mm in thickness, 130.5mm in width, and 2745mm in length.The scope of work includes

providing and fixing these MDF wall panels onto a framework constructed either from MDF or plywood. The framework should

have a thickness of 50 mm and a width ranging from 8mm to 12mm. The installation of the panels can be executed through either

the nail-down method or the pasting method, with the use of a high bonding adhesive suitable for MDF and plywood, NRC 0.65

upto 1 NRC . The finishing of the MDF wall panels should adhere to the approved architectural drawings and the directions

provided by the Engineer-in-Charge (EIC).

LAMINATE PANELLING : Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/

3.31 DSR/MR suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type 125 SQM 1224.65 153081.25

S, including cost of adhesive of approved quality.

9.127.2 1.0 mm thick

TOTAL WALL FINISHING WORKS 570358.72 1760393.00

4 MISCELLANEOUS WORKS

MODULAR KITCHEN - UNDER COUNTER STORAGE CABINETS:

Modular kitchen - Under counter storage cabinets:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk.HDHMR board with lamination in frosty white laminate with 0.8 mm laminate

complete with 0.8 mm edge banding.All shelves should be supported on approved quality SS pins and shall be adjustable for

different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with

4.01 MR 18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make- 4.5 SQM 10965.00 49342.50

Rehau,Ornare,Senosan and having handless profiles.The cabinet boxes of floor units will be supported by 100mm height vertical

adjustable legs (Hettich make) which will be covered with PVC skirting (Rehau or equivalent make ) in brushed aluminum finish

attached by hardware of skirting. The unit shall be fixed to the floor/ wall/slab using metal screws of appropriate size and raw

plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for measurement and payment.

Cabinet boxes size would be varies from 400X580X710MM to 1000X580X710MM (approx.) and join together as per site

requirements etc. Handle Profile,Aluminum Handle Profile for lift ups,O* Hinges,Corner Hinges,PVC

legs,Skirting,Connector,Screw,Wall Mount set. Complete all as per the direction of Engineer in Charge.

MODULAR KITCHEN - OVERHEAD STORAGE WALL UNITS:

Modular Kitchen - Overhead storage wall units:

Providing & fixing factory made modular kitchen cabinets in modular type knockable cabinet boxes with openable shutters and

sufficient number of drawers made of 18 mm thk. HDHMR board with lamination in frosty white laminate with 0.8 mm laminate

complete with 0.8 mm edge banding.All shelves should be supported on approved quality SS pins and shall be adjustable for

4.02 MR different heights as per requirements.Shutters and drawers fascia shall be at least 18mm thic with laminate on both sides with 4.5 SQM 10249.00 46120.50

18mm wide 2mm thick PVC edge banding, All Shutters/ drawers finished in high gloss acrylic of approved make-

Rehau,Ornare,Senosan and having handless profiles. The unit shall be fixed to the floor/ wall/slab using metal screws of

appropriate size and raw plugs. Only front face area of cabinets and skirting from floor to top of boxes shall be considered for

measurement and payment. Cabinet boxes size would be varies from 400X320X710MM to 1000X320X710MM (approx.) and join

together as per site requirements etc. Handle Profile,Aluminum Handle Profile for lift ups,O* Hinges,Corner Hinges,PVC

legs,Skirting,Connector,Screw,Wall Mount set. Complete all as per the direction of Engineer in Charge.

4.02A MR Providing and fixing of Innotech with metal sides and quadro channels .Make.Hettich,Samsung,Irex,Hafale 5 Each 7943.00 39715.00

4.02B MR Providing and fixing of Bottle pulout 200mm. Make Hettich, Samsung,Irex,Hafale 2 Each 11531.00 23062.00

SHOP DRAWINGS: Preparation of complete set of shop drawings including finishing, MEP services, details, design calcualtions

4.05 MR etc. and for prepration of as built drawing any other details as and when desired by Engineer Incharge/ client. A qualified 1 LS 100000.00 100000.00

professsional for the purpose shall be appointed after due appproval from Engineer InCharge.

TOTAL MISCELLANEOUS WORKS 0 258240.00

6 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - SANITARY & PLUMBING WORKS

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO S NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2023 DSR (INR) NON-DSR (INR)

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings

17.28.2 Flexible pipe

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved quality

2 conforming to IS : 8931

18.53.1 15 mm nominal bore EACH 4 574.30 2297.20

Cutting chases in brick masonry walls for following diameter sand cast iron/centrifugally cast

(spun) iron pipes and making good the same with cement concrete 1:3:6 (1 cement: 3 coarse

3 sand: 6 graded stone aggregate 12.5 mm nominal size) including necessary plaster and pointing

in cement mortar 1:4 (1 cement : 4 coarse sand) :

18.76 Cutting holes upto 30x30cm in walls including making good the same.

18.76.1 With common burnt clay F.P.S. (non modular) bricks EACH 1 416.80 416.80

Making chases upto 7.5 X 7.5 cm in walls including making good and finishing with matching

surface after housing G.I. pipe etc.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe

with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC

solvent cement and testing of joints complete as per direction of Engineer in Charge.

Internal work - Exposed on wall

18.7.2 6 20mm nominal outer dia pipes METRE 10 335.00 3350.00

18.7.3 25mm nominal outer dia pipes METRE 10 401.55 4015.50

18.7.4 32mm nominal outer dia pipes METRE 5 518.75 2593.75

18.7.5 40mm nominal outer dia pipes METRE 5 702.95 3514.75

18.7.6 50mm nominal outer dia pipes METRE 5 934.15 4670.75

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot

& cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with

clamps at 1.00 m spacing.

This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of

cutting chases and making good the same including testing of joints complete as per direction of

7 Engineer in Charge.

Concealed work including cutting chases and making good the walls etc.,

18.8.1 15mm nominal outer dia pipes METRE 10 497.80 4978.00

18.8.2 20mm nominal outer dia pipes METRE 10 537.60 5376.00

18.8.3 25mm nominal outer dia pipes METRE 5 627.25 3136.25

18.8.4 32mm nominal outer dia pipes METRE 5 739.30 3696.50

Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards

8 and weighing not less than 690 gms.

18.51.1 15 mm nominal bore EACH 2 798.95 1597.90

Digitally signed by AMIT

Providing, fixing, jointing and testing in position of ISI marked UV stabilized UPVC pipes for

soil, waste, and vent, Type-B as per IS : 13592 suitable for rubber ring joints, including all

neccessary specials and fittings (confirming to IS:14735) i.e. bends, tees, junctions (with or

without doors), reducers, WC connectors, couplers, expansion joints / bellows, cowels, clamps,

rubber rings, clean outs etc. fixing at wall/ ceiling/ floor level supported by clamp & hangers etc. in

concealed / inside duct / under floor & basement ceiling / external work etc. including chase

cutting as required, excavation and back filling in all kind of soils, suspended from floor under

false ceiling or embedding the pipes laid under floors / building in 75 mm. alround 1:2:4 cement

concrete (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including

MR cost of shuttering for proper completion of the work, breaking and making good the walls and

floors etc. after pipes have been duly laid and tested. The rubber ring shall confirm to IS:5382.

The Pipes will be supported with threaded G I rods & U clamps with nuts, washers etc on

50x50x5 mm slotted angle. The cost will include all support arrangements. The work includes

commissioning of all pipes lines as per drawings and specifications and as directed by engg-in-

charge at site.

a 110 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 20 536.00 10720.00

b 75 mm dia (Wall Thickness - 3.2 to 3.8 mm) METRE 5 416.00 2080.00

Providing, fixing, jointing and testing in position ISI marked (IS:4985) UPVC pipes of min 6 Kg/

Sqcm rating with fitting for waste pipe from fixtures to floor trap including reduces, enlarger,

MR 10 socket, couplers, bends, tees etc including fixing at wall/ ceiling level supported by clamp &

hangers etc. cutting holes in wall/ floors/ slabs and making good the same with cement concrete

1:2:4 complete as required.

Providing & fixing UPVC Floor trap of self cleansing design with stainless steel grating complete

MR 11 in all respects.

Plain Floor Trap (4" Ht) with 50 / 75 outlet and with height raiser EACH 2 536.00 1072.00

MR 12 Extra for providing & fixing 125 mm dia C.P. grating in place of C.I. grating over floor traps. EACH 2 726.00 1452.00

Providing & fixing of SS Floor Cleanout, round or square with rubber seal and flat round cover

with screws and other required fitting complete as required.

Supply, Installation, testing and commisioning of toilet waste water super quiet portable pumping

station. Pump upto vertical 5 meters and horizontal 100 meter from toilet to vertical shaft with inlet

connection in portable pump side inlet of 50, 75, 110 as per requirement to complete the work as

per the directions of engineer in charge

Supply, Installation, Testing and Commisiong of single lever sink mixer (table mounted) with

extractable hand shower dual flow complete with 1.2 m long tube with 450 mm long braided

MR 16 Supply, Installation, Testing and Commissioning of 15 litre geyser EACH 1 12004.00 12004.00

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I.

17.10 brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and

17 making good the walls wherever required :

17.10.1 Kitchen Sink with Drain Board

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - ELECTRICAL WORKS

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION TOTAL AMOUNT TOTAL AMOUNT

S NO UNIT QUANTITY RATE

2022 DSR (INR) NON-DSR (INR)

A POINT WIRING

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC conduit,

A.1 with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS

PVC insulated copper conductor single core cable etc as required.

Wiring for group controlled (looped) light point/ fan point/call bell point (without independent switch

etc.) with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface /

A.2 recessed PVC conduit, and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper

conductor single core cable etc as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core

A.3 1.12 cable in surface/ recessed medium class PVC conduit alongwith 1 No 4 sq. mm FRLS PVC Metre 1497.47 334.00 500153.98

insulated copper conductor single core cable for loop earthing as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 amp socket outlet Each 120 122.00 14640.00

1.24.5 6 pin 15/16 amp socket outlet Each 14 197.00 2758.00

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

1.27 Supplying and fixing following size/module, GI box along with Modular base & cover plate on

existing modular metal boxes etc. as required.

B SUBMAIN AND CONTROL WIRING

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated

copper conductor, single core cable in surface/ recessed medium class PVC conduit as required

1.14.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire Metre 80 233.00 18640.00

1.14.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Metre 150 275.00 41250.00

1.14.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire Metre 30 334.00 10020.00

1.14.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Metre 30 439.00 13170.00

1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 30 1005.00 30150.00

1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 30 1365.00 40950.00

Supplying and making end termination with brass compression gland and aluminium lugs for

9.1 following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV

C.1 grade as required.

Supply of following XPLE armourned 1.1 KV grade conforming to I.S.7098/1554Aluminium

Conductor Cables :

MR Supply of following sizes of PVC sheathed PVC/XLPE insulated Aluminium conductor armoured

C.2 cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI marked.

(d) 3.5 C x 50 Sqmm XLPE cable RM 35 510.00 17850.00

(e) 3.5 C x 35 Sqmm XLPE cable RM 35 378.00 13230.00

Supply of following sizes of copper cables -PVC sheathed PVC/XLPE insulated Copper conductor

C.3 MR armoured cable of 1.1 KV grade conforming to IS:7098 part-1 / IS:1554 part-1 respectively & ISI

(a) 4 C x 16 Sqmm XLPE copper cable RM 20 1446.00 28920.00

(b) 4 C x 25 Sqmm XLPE copper cable RM 20 2253.00 45060.00

D.1 2.11 Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. Each 20 13.00 260.00

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker

2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

2.13 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

2.4 distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus

D.4 bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But

without MCB/ RCCB/ Isolator)

MR 12 way (4 + 36), Double door Each 3 9081.00 27243.00

Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual

2.14 current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing

MCB DB complete with connections, testing and commissioning etc. as required.

E PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

E.1 MR Supply, installation, testing & Commissioning of 1 module 16A SWITCH SP 1 way for floor box. Set 1 216.00 216.00

E.2 MR Supply, installation, testing & Commissioning of 2 module 16 A Socket for floor box box. Set 2 577.00 1154.00

Supply, installation, testing & Commissioning of Specific Backbox for Carpet for Floor Box along

E.3 MR with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and single cable Set 1 12106.00 12106.00

outlet/ glavanized steel, paint RAL 7031 for floor box .

Supply, installation, testing & Commissioning of Specific Backbox for Wooden Flooring for Floor

E.4 MR Box along with LID and TRIM for tiles/ marble 15 to 20mm thickness material for headband and Set 2 6803.00 13606.00

single cable outlet/ glavanized steel, paint RAL 7031 for floor box.

E.5 MR Supply, installation, testing & Commissioning of flat support plate 8 module for integration of Set 2 263.00 526.00

Mechanism for Floor Box

Supply, installation, testing & Commissioning of waved support plates for 4 module (2x2) modules

Supplying and fixing following modular switch / socket on the existing modular plate & switch box

E.7 including connections but excluding modular plate etc. as required.

1.24.7 TV socket outlet Set 3 148.00 444.00

Supply, Installation, Testing and Commisioning of Galavanized Iron (GI) Raceways along with

MR required suitable number of GI couplers for joining raceways and fixing GI brackets and all

accessories complete in all respect as per the directions of engineer in charge

(a) 300mmx38mm(GI) - 3 compartment Mtr 52 1738.00 90376.00

E.9 (b) 225mmx38mm(GI) - 3 compartment Mtr 10 1420.00 14200.00

Supply, Installation, Testing and Commisioning of Junction boxes for direct access to cables at the

MR intersection of raceways supplied completely with base and cover plates, height adjustable

junction box 65- 90 mm including all accessories ss plate of 3mm thick complete in all respect as

E.10 per the directions of engineer in charge

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

E.11 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the exisitng Meter 90 47.00 4230.00

surface/recessed steel/ PVC conduit as required

Supplying and fixing of following sizes medium class PVC conduit aong with accessories in

1.21 surface/ recess including cutting the wall and making good the same incase of recessed conduit

Supplying and Installation of following size perforated of painting with powder coating M.S. cable

4.1 trays of perforation of not more than 17.5% in convinient sections, joined with connectors

E.13 suspended from the cieling with MS suspenders including bolts and nuts painting suspenders etc

4.1.6 450 mm width x 50 mm depth x 2 mm thickness Metre 50 1137.00 56850.00

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and

F.1 5.6 providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 SET 4 13838.00 55352.00

metre long etc. with charcoal/ coke and salt as required.

F.2 5.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as MTR 50 1162.00 58100.00

F.3 5.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as MTR 50 244.00 12200.00

F.4 5.16 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. MTR 200 70.00 14000.00

G PANEL BOARDS

G.1 MR Floor Panels/ HVAC Panel

Designing, fabricating, transporting, unloading, storing, fixing in position, testing and

commissioning the following sheet steel cubicle type panels fabricated from 1.6mm thick CRCA

sheet, dust and vermin proof, indoor type TPN Panels with hinged lockable doors fabricated from

2mm thick CRCA sheet, suitable for 415V, 3 phase 4 wire 50Hz AC supply with rear access for

cable alley and with segregated bus-bar chamber with tinned aluminium bus bar and including

supplying and fixing following switchgears, meters and accessories, inter-connections, bonding to

earth, powder coated painting and marking as specified. Switch boards complete as per schematic

Type of construction: Form 3

IP classification: 42

The LT PANEL shall be electrically inter-locked as shown in Schematic diagram and as detailed

in the Specifications

Colour: Gray Powder Coated, as per approved sample.

1 nos, 100 Amps. 4 pole MCCB , i.e four pole Moulded Case Circuit Breaker of fault breaking

capacity 25 KA (ICS=ICU up to 433 V) complete in all respect

TPN aluminum bus bars of minimum of 200 Amps capacity with heat shrinkable colored sleeves

and I/C DMC/SMC bus bars supports at required intervals complete for cross section, size

supports & their spacing etc. for withstanding fault level of 25 MVA for 1 Sec.

(a) 63 Amps, TPN, MCB - 1 Nos.

(b) 40 Amps, TPN, MCB - 4 nos

Panel complete as above Each 2 125000.00 250000.00

H SAFETY ITEMS

Providing and fixing MV danger notice plate of 200mm x 150mm made of mild steel, atleast 2 mm

H.1 2.21 thick, and vitreos enamelled white on both sides and with iscription in single red colour on front Nos. 2 269.00 538.00

side as required

Total of Electrical items 1045710.98 640603.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES - LIGHTING WORKS

S NO DSR/MR Description Image Unit QTY Rate DSR AMOUNT NON DSR AMOUNT

Supply, Installation, Testing and Commissioing of Recessed downlightwith HPE (High-

Performance Efficiency) with LED (Light Emitting Diode), system power: 12 W, Luminous

flux of luminaire 1320 lm, 110 LM/W system efficacy, Colour temperature of 4000 K,

Neutral white, CRI > 80, 230V constant current driver, 70% of luminous flux after 50,000

1 MR operating hours; energy-efficient LEDs, direct light emission, housing in die-cast Nos 39 1394.00 54366.00

aluminium, Polyester powder white coloured coat applied over a 5-stage pre-treatment

trim, prismatic diffuser for homogenous light distribution, ZHLS (ZERO HALOGEN LOW

SMOKE) wiring, Electronic control gear, Protection class II, IP 40, Ø = 175 mm, DA(Ø) =

Pendent luminaire with HPE (High Performance Efficiency) LED (Light Emitting Diode),

system power: 28W, Luminous flux of luminaire 3080 lm, 110 LM/W system efficacy,

colour temperature of 4000 K, neutral white, CRI > 90, THD<5%, SDCM 3, 230V constant

current driver, 70% of luminous flux after 50,000 operating hours, Energy efficient LEDs,

2 MR Direct light emission, Luminaire profile in aluminium, Polyester powder aluminium white Nos 46 4001.00 184046.00

coloured coat applied over a 5- stage pre-treatment, prismatic diffuser for a homogenous

light distribution ZHLS(ZERO HALOGEN LOW SMOKE) internal wiring, integral electronic

control gear, Protection class I, IP 40, L = 1175 mm, B = 52 mm, H = 70 mm,

Recessed with trim luminaire Pinspot light with LED(Light Emitting Diode) system power:

5W, luminous flux of luminaire 400lm, colour temperature of 4000K, Neutral white, CRI>90,

230V constant current driver, 70% of luminous flux after 50,000 operating hours, direct

3 MR light emission, aluminium housing with trim, polyester White powder coat applied over a 5 Nos 4 1200.00 4800.00

stage pre-treatment on trim, with lens and a beam angle of 24° and external electronic

control gear, Protection class II, IP20

Supply, Installation, Testing and Commisioning of Round Ring shaped Suspended

mounted LED Ceiling luminaire with Downlight distribution with Ring shaped Diffuser

having system power: 70W, Luminous flux of luminaire 7000lm, direct light emission, CRI >

80, 230V constant current driver, 70% of luminous flux after 50,000 operating hours,

energy efficient LEDs with Dia. (Ø) 1200mm with Opal PC/PMMA diffuser for homogenous

4 MR uniform, soft and glare free light distribution, luminaire housing profile in extruded

aluminium with efficacy of 100Lm/W, Power Factor of more than 0.90 & CCT -

4000K/5700K, Powder coated White/Black coloured, Internal wiring along with Integral

Electronic Driver having an in built Surge Protection of 2.5kV, Adjustable wire suspension,

Protection class I, IP20.

1 Digitally signed by AMIT

SCHEDULE OF QUANTITIES - HVAC WORKS

DSR HVAC TOTAL

S No 2019/DSR DESCRIPTION UNIT QUANTITY RATE AMOUNT

EM 2022 DSR (INR) NON-DSR (INR)

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant Flow/Variable

Refrigerant Volume air cooled Outdoor units suitable for cooling and heating, having all hermetically

sealed inverter type Scroll Compressor(s), minimum two compressors for above 14 HP modules,

microprocessor based Controller, top discharge type condensing unit(s), with R 410 A Refrigerant,

1 1.0 vibration isolators, with suitable foundation etc. complete as required. The unit shall deliver the rated per HP 24 16415.00 393960.00

capacity at AHRI Conditions and work even at 50°C ambient temperature without tripping. The unit

shall be suitable to work on 400V +/- 10%, 3 Phase, 50Hz AC power supply. The unit shall be filled

with first charge of the refrigerant and ready for use as required. The COP at AHRI conditions shall

not be less than 3.1 and IEER not less than 6.5 .

Supply, installation, testing and commissioning of following minimum capacity 4-way flow VRV/VRF

Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan

section with low noise fan/dynamically balanced blower, multispeed motor, coil section with DX

Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary supports,

2 2 vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity

of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Supply, installation, testing and commissioning of following minimum capacity 1 (ONE)-way flow

VRV/VRF Cassette Type Indoor ceiling mounted unit equipped with synthetic washable media pre-

filter, fan section with low noise fan/dynamically balanced blower, multispeed motor, coil section

with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill, necessary

3 MR supports, vibration isolation, cord less remote control etc., suitable for operation on

single phase 230 V ± 10%, 50Hz AC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity

of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.

Lifting, Shifting, Supply, Installation, Testing & Commissioning of Interconnecting "Y" & "T" Joints i.e.

Refnet Joints/ Header with Insulation for refrigearnt piping

Refrigerant Piping

Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of

following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete

6 5 with fittings, with suitable adjustable ring type hanger supports, jointing/brazing including

accessories, insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for Suction and Liquid

lines, all accessories as per specifications etc. as required :

6.1 5.1 6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 90 245.00 22050.00

6.2 5.2 9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 120 331.00 39720.00

6.3 5.3 12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 90 466.00 41940.00

6.4 5.4 15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 120 588.00 70560.00

6.5 5.5 19 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 707.00 70700.00

6.6 5.6 22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 100 865.00 86500.00

6.7 5.7 25.4 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1022.00 51100.00

6.8 5.8 28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation m 50 1108.00 55400.00

6.9 5.9 31.8 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 25 1170.00 29250.00

6.1 5.1 34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 25 1230.00 30750.00

6.11 5.11 38.1 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1265.00 6325.00

6.12 5.12 41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation m 5 1309.00 6545.00

Supply, Laying, Termination of ISI Certified 2 Core 1.0 sq.mm ATSC, FRLS,PVC insulated,

7 MR Unarmored, Tinned Copper, twisted, shielded, PE insulated, VAV Communication Cable with Rmt 210 235.00 49350.00

proper ferrules, lugs and other necessary accessories. The spec shall meet the system

manufacturer specifications.

Supply, Installation, Testing and Commisioning of Central Controller with independent touch screen

having capability of catering maximum 64 IDU.

9 1.14 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as

Supply, installation, testing and commissioning of PVC drain water with necessary clamps, fittings

such as bends tees etc. and duly insulated.

40mm dia (9mm thick insulation) Rm 210 374.00 78540.00

11.0 Supply, Installation, Testing & Commissioning of Silent type circular /rectangular inline

a 200 CFM S P of 13-14 for Toilet Nos. 1 6899.00 6899.00

Total HVAC WORKS 1222974.00 548441.00

Digitally signed by AMIT

Schedule of Quantities: Integrated IT ACTIVE, PASSIVE, Wi-Fi & EPBAX SYSTEM

S No Item Description UoM QTY Rate DSR Amount NDSR Amount

Supply Installation Testing & Commissioning of Cat6A UTP 24 AWG Patch Cord Patch cord (2 mtr.): 6A UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed

Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100- Base-T and 1000-Base-T. Available In LSZH Jacket-Reduced

Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 3 Prong Design for accurate termination, 50µ" Gold Plated Contacts , Insulation Thickness 0.16mm, 100% Factory Tested , Transparent

1 Boot Cable Assemblies.ETL Verified 4 connector channel performance with MTPL up to 635 MHz, and registered under a ETL Followup Program. Complaint to RoHS Directive 2011/65/EU and Set 156 325.00 50,700.00

(EU) 2015/863. OEM should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and and should have a certified PMP, CDCP and ITIL on the OEM’s payroll sitting in India whose services

can be utilized for this project for Data as per given Specification etc. all complete

Supply Installation Testing & Commissioning of Cat6A UTP 24 AWG Patch Cord Patch cord (1 mtr.): 6 UTP Patch Cords are Factory Tested for Better Quality and Suitable for the High Speed

Data Transmission. Complies to the Standard ANSI/TIA/EIA-568-C.2 Standard. Supports Data Networks Speeds Up to 10/100- Base-T and 1000-Base-T. Available In LSZH Jacket-Reduced

Toxic Gasses Emitted During Combustion , RJ45, 8P8C, 3 Prong Design for accurate termination, 50µ" Gold Plated Contacts , Insulation Thickness 0.16mm, 100% Factory Tested , Transparent

2 Boot Cable Assemblies.ETL Verified 4 connector channel performance with MTPL up to 635 MHz, and registered under a ETL Followup Program. Complaint to RoHS Directive 2011/65/EU and Set 156 275.00 42,900.00

(EU) 2015/863. OEM should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and and should have a certified PMP, CDCP and ITIL on the OEM’s payroll sitting in India whose services

can be utilized for this project for Data Jack Panel end as per given Specification etc. all complete

Supply, Installation, Testing and Commissioning of loaded Patch Panel 24 Port Cat 6A U/UTP ,The Cat-6Atransmission performance is in compliance and Exceeds ANSI/TIA/EIA-568.2-D

Standard. Supports 1000-Base-T. 90 Degree (Top Entry) or 180 Degree Punch Down Design for Convenient Network Terminations, Individual replaceable jack module panel design as

3 applicable.UL Listed, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863 and ASTM B 117 Certified. OEM should have ISO 9001:2015, ISO 14001:2015and ISO 45001:2018 or Nos 5 12,500.00 62,500.00

latest.All networking passive material (Fiber Cable, Copper Cables, Networking Racks and their connectivity components) should be from one OEM make only for Data as per given

Specification etc. all complete

4 Supply Installation Testing & Commissioning of 1 uPVC Cable Manager as per given specification etc. Nos 5 1,250.00 6,250.00

5 Supply, Installation, Testing & Commissioning of Mounting Hardware pack of 10pcs as per given specification etc. all complete Nos 1 200.00 200.00

6 Supply, Installation, Testing & Commissioning of 24U Closed Network Rack , 6/16Amp PDU with fuse, 4X Fans standard accessories as per given Specification etc. all complete Nos 1 35,000.00 35,000.00

Supply, Installation, Testing and Commissioning of Information Outlet Set(I/0) : Single/Dual Face Plate Square (86 x 86mm) x 12 mm Shutter on Face Plate Two Piece design : Mounting Frame

and Cover Plate Should support UTP and STP Jacks Cat5e, Cat6 and Cat6A Plug Reliability : 750 Cycles minimum Cover Material : ABS UL94-V0 Base Material : ABS- UL94-V0 Dust Cover

7 Material : ABS-UL94-V0 ,Should have Robust and installer friendly design Surface Mount Boxes for Face Plates for a variety of media including voice and data, Audio, video and CATV distribution Nos 156 214.00 33,384.00

to the work area. Material : ABS, Shape : Square Size : 86 x 86 , White colour. Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863. OEM should have ISO 9001:2015, ISO 14001:2015,

ISO 45001:2018 and should be present in India for at-least 10 years or more

Supply,lnstallation,Testing & Commissioning of 4 pair Cat6A U/UTP Cable in the existing surface/ recessed steel/ PVC conduit as required (Approx. Cable length per Box: 305 mt): The 4 pair

Unshielded Twisted Pair cable shall be UL Listed,exceeds the requirements of ANSI/TIA-568- C.2 and ISO/IEC 11801 Class E, 4 twisted pairs separated by internal HDPE Cross Separator. Full

separator. Half shall not be accepted. Rip Cord is must,lnsertion Loss of 32.8 db/l00m at 250 MHz ,Cable should support operating temperature from -20°C to +60"C Cable support Conductor

8 Resistance ≤ 9.38ꭥ/100m Max., Cable support Delay Skew:< 45 ns/100m, Operating Voltage: 72V , Impedance: 100 ± 15 @100 MHz. and Propagation Delay @250 MHz : 536 ns/100m, ETL Nos 13 25,935.00 337,155.00

Verified 4 connector channel performance with MTPL up to 635 MHz, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863, OEM should have ISO 9001:2015, ISO 14001:2015 and ISO

45001:2018 or latest.All networking passive material (Fiber Cable, Copper Cables, Networking Racks and their connectivity components) should be from one OEM make only as per specification

etc. all complete

Supply, Installation, Testing and Commissioning of Information Outlet Category 6A Keystone is Punch Down Type 50 Micron Gold Plating Suitable For 23~24 AWG Stranded and Solid Wire.

Skilled Design on Jack and PCB. Ergonomic Design and Easy Termination, Compliant to T568A and T568B Wiring Schemes, Backward compatible with both RJ11/RJ12 Plug,Housing : High

9 impact flame retardant plastic, UL 94V-O rated. ETL Verified 4 connector channel performance with MTPL up to 635 MHz, Complaint to RoHS Directive 2011/65/EU and (EU) 2015/863. OEM Nos 156 522.00 81,432.00

should have ISO 9001:2015, ISO 14001:2015, ISO 45001:2018 and should be present in India for at-least 10 years or more. Blue Colour for Data as per specification etc. all complete

S.No. Item Specifications Qty Unit Rate Amount

Meeting Room 01 & 02

Supply, Installation, Testing and Comissioning of 65" or

larger LED display. Brightness -400nits or better,

Resolution- 4K UHD or better, Viewing Angle (H/V) -

65" inch 178/178 or better, Contrast Ratio - 4,000:1 or better,

Display Ports - Minimum 2 x HDMI, 1 xDisplay port, 2xUSB, 1 x

RJ45, 1xRS232 or more. Bluetooth and WiFi

connectivity options. With standard accessories and

suitable MS wall mounting bracket.

Supply, Installation, testing and commissioning of

Ceiling Microphone tile with 15 or more no. of built-in

microphone, coverage area : 39sq mtr or more, should

be Powered over Ethernet, Should have Dante and

control over single CATx cable (qty of microphone will

3 vary as per the mentioned coverage area and built in 1 Nos ₹ 518,000.00 ₹ 518,000.00

micorphone), should come with lighting indicator, It

should work on open control protocol software and

compitable to monitor with a single sofware for all the

microphone in the campus etc complete required as per

the specifications.

Suppy Installation Testing and Commissioning of digital

signal processor with minimum 14no. Or more Mic /

line input with phantom power and AEC and 8 or more

line level output, 1no. Or more GPIO at least 2 channel

of USB input and output for software Video

Digital Conferencing, should have 64x64 channel of digital

4 Signal dante input output, Should have sampline rate of 1 Nos ₹ 457,500.00 ₹ 457,500.00

Processor 48kHz or better, Should be expandable for port

expansion, should support Control with App via iOS

and Android devices, or any third-party control

system, Shall have Built-in filters, feedback

suppression, AGC etc complete as required as per

Supply, Installation, testing and commissioning of

Quad channel energy star rated digital power

amplifier,Quad channel 4 Ohm or 8 ohm energy-

efficient amplifier - 4 x 30W or more 70/100V

Technology : Class-D,Input linking through miniature

switches, Switching mode power supply, Protection :

DC Short circuit & Over heating & Over load & Signal

limiting, Frequency Response 120 Hz - 20 kHz or

better, Silent passive cooling etc complete required as

per specifications.

Supply, Installation, testing and commissioning of 6.5"

two-way coaxial thin edge ceiling loudspeaker, 100V

transformer power taps : 24,12,6, watts, Conical

dispersion : 145° or more, impedance : 8, low

impedance RMS continous power : 30watts, frequency

range : 50 Hz - 20 kHz or better, frequency response :

60Hz - 20KHz or better etc complete required as per

specifications.

Supply, Installation, Testing & Commissioning of Full

HD PTZ Camera supporting 1080p at 60 Frames per

Second, minimum 12X Optical Zoom with FoV of 72

degree and minimum 255 presets. Camera should

support simultaneous outputs through HDMI, USB 3.0,

IP/3G-SDI, Audio In and can be controlled via

RS232/422 and IP. Panning angle -170° ~ +170° ,

Tilting angle -30° ~ +90. Camera should support SRT,

PoE & should be compatible with Virtual USB Driver.

OEM should be BIS, CE, Clickshare, RoHS & FCC

Certified with test lab report supporting the

certifications.

Supply, Installation, testing and commissioning of

HDMI RX extender with complies with the advanced

HDCP 2.2 and HDMI 2.0 standards, uncompressed HD

audio and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and

upto 40mat 4K, HDBaseT feature support: HD Video

and Audio, and Control (IR/RS-232 pass-through) and

CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream

and HD Bitstream

Supply, Installation, testing and commissioning of

HDMI TX extender complies with the advanced HDCP

2.2 and HDMI 2.0 standards, uncompressed HD audio

and video as well as control via a single run of

Cat.5e/6/7 cable over distances of up to 70 meters and

upto 40mat 4K, HDBaseT feature support: HD Video

and Audio, and Control (IR/RS-232 pass-through) and

CEC bypass, Supports pass-through of many audio

formats including LPCM (up to 8 channels), Bitstream

and HD Bitstream

Supply, Installation, testing and commissioning of

Cable cubby (1 HDMI, 1LAN,1 Charging socket)

11 Cables Cables & connectors 1 Lot ₹ 15,000.00 ₹ 15,000.00

SCHEDULE OF QUANTITIES - FIRE ALARM

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

DSR NO DESCRIPTION UNIT QUANTITY RATE TOTAL AMOUNT TOTAL AMOUNT

2022 DSR (INR) NON-DSR (INR)

Supplying, installation, testing & commissioning of intelligent analog addressable photothermal

detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of response indicator on surface/recessed MS

Box having two LED, metallic cover complete with all connections etc as required.

Supplying, installation, testing & commissioning of fault isolator complete with base as required.

Supplying, installation, testing & commisssioning of intelligent addressable programmable

sounder complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete as

Supplying, installation, testing & commissioning of 1.5/3/6W ceiling speaker complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed

7 17.5.2 copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as Mtr. 288 173.00 49824.00

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the

17.5.3 existing surface / recessed steel conduit of following pairs, cores and size including connections

and interconnections etc. as required.

17.5.3.2 speaker cable Two pair, 2-core, 1.5 sqmm Mtr 108 89.00 9612.00

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and

accessories like coupler etc. as required.

TOTAL FIRE ALARM WORKS 165351.00 0.00

Digitally signed by AMIT

SCHEDULE OF QUANTITIES: FIRE PIPING, HYDRANTS, SPRINKLERS AND ACCESSORIES

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

S No DSR 2022/ DESCRIPTION QTY UNIT RATE TOTAL TOTAL AMOUNT

DSR (INR) NON-DSR (INR)

Providing, laying, testing & commissioning of 'C' class

heavy duty MS pipe conforming to IS 3589/IS 1239

including Welding, fittings like elbows, tees, flanges,

18.7 tapers, nuts bolts, gaskets etc. and fixing the pipe on the

1 wall/ceiling with suitable clamp/support frame and painting

with two or more coats of synthetic enamel paint of

required shade complete as required :

Providing, fixing, testing & commissioning of 15mm dia

18.21 quartzoid bulb type sprinklers of rating 68 degree

centigrade with required accessories :

18.21.1 Pendant type 40 Each 522.00 20880.00

Supplying, installation, testing & commissioning of sprinkler

flexible pipe (UL Listed) of stainless steel complete with 15

NPT on reducer thread with maximum working pressure of

175 PSI test pressure of 875 PSI (Burst) with branch line

3 18.25 (Inlet) 25mm NPT male thread to sprinkler head (Outlet)

15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes

complete as required.

Providing and fixing ISI Marked of approved make Fire

4 Extinguishers complete with all accessories as per

manufacturer's specifications.

a) CO2 gas nozzle type - 9 Litre capacity (IS:15683). 1 NOS 12912.00 12912.00

Mechanical Foam gas cartridge type. 9 Kg capacity

ABC dry powder stored pressure type 6 kg capacity

Digitally signed by AMIT

Item Total Amount

Item Description Technical Specifications Unit Rate

No. Qty (in Rs.)

The worktop shall be made of 25mm thick pre laminate partical boards with E1 norms dully finish with 2mm pvc edge band all the

side of worktop. Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering

the board at 45 degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on

automatic machine. The understructure of the table shall be provided with heavy duty 4 vertical legs made up of Oval shaped

Solid wood with Tapper at the bottom size 68 to 32. Horizontal cross beams under table top that shall be connected to all 4

vertical legs through pressure die cast aluminium connector. The connector having Y-shape which having 2 rectaangular face for

cross beam and one having oval shape for solid wood. The connector shall connect one vertical leg and two nos Rectangular

horizontal frames on either ends to form sturdy structure between horizontal beams and vertical legs. The entire metal

understructure shall be powder coated to 40-60 microns thickness. The vertical legs shall be provided with 6mm tap drill for

1 buffer Levelers to adjust for floor undulation. all the visible surface of the boards shall be sealed with 2mm thick PVC edge

banding on automatic machine. The Intermediate leg: Two Verticals of Intermediate leg will have to be with 60x40mm

rectangular ERW tubes and both legs are joined using a beam section of 40x40x1.6mm thk at the top side. The 60x40 verticals to

have through “U” notch or through cut out of 40x41mm size at the top side to locate 40x40 cross beam. For ease of wire

management, a 350 mm length & 142mm breadth flip up cover made up of aluminum having soft closure & with option to fix

laptop ring should be provided. A flip down mechanism enabled cable tray shall be provided below the worktop to mount switches

A Linear workstation Size - 1200L x 750D x 750H 20 45000 900,000

B Sharing workstation Size - 1200L x 750D x 750H 22 40000 880,000

Mid Back Chair: The overall size of Chair shall be height 1050 to 1170 +/-5 mm, Back Width 495 mm at Top and 385mm at

bottom, Seat Width 500 +/-5 mm, Seat Depth 390 to 450 +/-5 mm and Seat height 480mm to 600 mm +/-5mm range. And over

all chair width should be 690 +/-5mm and Overall chair depth should be 630 to 690 +/-5mm. Seat should be made up of foam

pre moulded at 55 kg/m3 density. hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. Seat shall be upholstered with

Workation and Polyester & viscose- 380 GLM, Abrasion- > 45000 cycles. The chair shall be supplied with Lenear Mesh at the back & shall be

2 Meeting table provided With 290mm width. Adjustable Lumbar Support full length of size 325 mm,105 mm height and 3mm thickness in 48 25000 1,200,000

Chair contoured form can travel upto 30mm at the back . The Chair should be provided with Synchro tilt Mechanism with Multi lock

features. The mechanism shall allow 360 degree revolving feature along with height adjustablility. chair shall have seat sliding

mechanism.Three Way Adjustable Arms to be provied with height adjustment button made of Delrin P 500 and arm height

adjustability nob shall be provided under the armrest. The mechansim shall possess seat to back recline ratio of 3:7.Tension

adjustment knob shall be provided under seat. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Nylon Base

The size of the main table shall be 1800 length x 900 Depth x 750 mm height. The side unit shall be of size 1200 length x 750

depth x 750 mm height. The table top of main & side unit shall be made up of 25mm thick prelimated particle board of E1 norms.

Two Long sides of the work surface shall be provided with reverse tapered edge design created by chamfering the board at 45

degree inside for 17mm length & keeping 8mm straight & then edges sealed with 2mm thick PVC Lipping on automatic machine.

Modesty panel shall be made up of 18mm thick prelaminated particle board of E1 norms. The modesty panel shall be connected

through 3 nos L-shape pressure aluminium die casted connector of size 80L x 25D x 3mm thick. The worktop shall be connected

with the understructure with the help of cross beam of size 40x20mm The side unit shall be made up of 18mm thick pre

laminated particle board E1 norms and there shall be drawers in the middle and shutter storage on either ends. Handless Finger

groove shall be created on top edge of shutter top / drawer top by providing a reverse tapered profile edge of 6mm straight

surface & 12 mm tapered towards inside at 45 degree & then sealed with minimum 2mm thick PVC lipping on automatic machine.

3 Cabin table 1 75000 75,000

Suitable lock shall be provided. The understructure of the Main table shall be provided with heavy duty 4 vertical legs made up of

Oval shaped Solid wood with Tapper at the bottom size 68 to 32. Horizontal cross beams under table top that shall be connected

to all 4 vertical legs through pressure die cast aluminium connector. The connector having Y-shape which having 2 rectaangular

face for cross beam and one having oval shape for solid wood. The connector shall connect one vertical leg and two nos

Rectangular horizontal frames on either ends to form sturdy structure between horizontal beams and vertical legs. The entire

metal understructure shall be powder coated to 40-60 microns thickness. The vertical legs shall be provided with 6mm tap drill

for buffer Levelers to adjust for floor undulation. all the visible surface of the boards shall be sealed with 2mm thick PVC edge

banding on automatic machine. The front fabric screen shall be provided of size 1050 mm L x 350 mm ht. made up of 18 mm

thick prelam particle board of grade E1 upholstered by fabric, having aluminum extrusion at all three sides having cross section

size of 12mm x 5mm & joined at all 4 corners with Zinc mazak5 die cast connector of size 15 L x 15 H x 12mm W.

The overall size of Chair shall be : Width 660mm , Depth 660mm & Height 1250 to 1350 mm. Seat Size shall be : width 490mm,

Actual depth 520mm, Effective depth 430mm and height 475mm to 575mm. Width of the back shall be 425mm at bottom &

Lumbar level 440mm & min 480mm at shoulder level. Back height shall be 690mm as measured from seat level. The chair shall

be supplied with high quality Mesh at the back. Back outer shall be injection moulded with Nylon GF30% material. Seat should be

made up of foam pre moulded at 55 kg/m3 density & hardness of 25+ 3kgf at 50% deflection conforming to IS 3400.The chair

shall be supplied with Dynaflex Two Piece Back Construction with IS20D Mesh upholstred. Back shall be provided With 260mm

width, 160mm height and 50mm height adjastable Headrest Thickness of seat foam shall be 55 mm. Seat shall be upholstered

Cabin table High with micro fabric 100% polyster 180 GSM having abrasion > 50000 cycles fire rated fabric confirming to BS EN 1021. Plywood

4 used shall be 12mm thick 9 ply hot pressed. The Chair should be provided with Synchro tilt Mechanism (Bio Snchyro mechansim) 1 35000 35,000

allowing 360 degree revolving movement along with height adjustablility & tilt tension. The chair shall have seat depth

adjustment. The mechansim shall allow seat to back recline ratio of 2:5. The Gas Lift used shall be class 4 tested as per ANSI

BIFMA standards. Height adjustable Arms to be provied operated through button made of Delrin P 500. Arm pad material shall be

polyurethane with 2mm metal insert. Nylon Base having PCD of 660mm five pronged base made up of PA6, 30% glass filled

reincforced with bottom ribbing to be provided. 50mm dia twin castors with PA6 material to be provided.

The overall size of Chair shall be : Width 660mm , Depth 660mm & Height 1150 to 1250 mm. Seat Size shall be : width 490mm,

Actual depth 520mm, Effective depth 430mm and height 475mm to 575mm. Width of the back shall be 425mm at bottom &

Lumbar level 440mm & min 480mm at shoulder level. Back height shall be 570mm as measured from seat level. The chair shall

be supplied with high quality Mesh at the back. Back outer shall be injection moulded with Nylon GF30% material. Seat should be

made up of foam pre moulded at 55 kg/m3 density & hardness of 25+ 3kgf at 50% deflection conforming to IS 3400. The chair

shall be supplied with Dynaflex Two Piece Back Construction with IS20D Mesh upholstred.Thickness of seat foam shall be 55 mm.

Seat shall be upholstered with micro fabric 100% polyster 180 GSM having abrasion > 50000 cycles fire rated fabric confirming to

BS EN 1021. Plywood used shall be 12mm thick 9 ply hot pressed. The Chair should be provided with Synchro tilt Mechanism (Bio

5 tablemedium 3 35000 105,000

Snchyro mechansim) allowing 360 degree revolving movement along with height adjustablility & tilt tension. The mechansim

shall allow seat to back recline ratio of 2:5. The Gas Lift used shall be class 4 tested as per ANSI BIFMA standards. Height

adjustable Arms to be provied operated through button made of Delrin P 500. Arm pad material shall be polyurethane with 2mm

metal insert. Nylon Base having PCD of 660mm five pronged base made up of PA6, 30% glass filled reincforced with bottom

ribbing to be provided. 50mm dia twin castors with PA6 material to be provided.

The overall size of discussion table in Dia. 1200mm X 750mm H that is to be assembled at site. The table top shall be made up

of 25mm thick Pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. The

table top profile shall be in circular shape and the edges shall be sealed with 2mm thick thin strip of impermeable PVC that is

Round meeting cut to fit the size of board panel and duly pasted with the assistance of edge banding machine Leg: shall be made up of high

table pressure aluminum die casted 20 degree tapered, number “7” shape & oblong cross section of about 55mm on top, 45mm at

bottom and of 725mm length to get 750mm table height, it acts as vertical structural support member, connected by a horizontal

cross beams 50x25x1.6thk (16g) ERW tube & connected to the Aluminium diecast vertical legs through a high pressure

Aluminium diecast connectors.

Basic Total 3,265,000.00

Total Amount 3,852,700.00

Total Amount 3,852,700.00