PROVN OF HARDSTANDING IN ASSEMBLY GROUND AND PROVN OF PARKING SHED AT KV NAMKUM UNDER GE RANCHI

Amount

Surface exavation n.exc 30cm deep and averaging 15cm deep and getting out in any type of soil all as specified and directed

Excavation in trenches n.exc 1.5 metres wide and n.exc 1.5 metres deep for for foundation etc for shafts, cesspits, manholes etc n.exc 10 Sqm on plan and n. exc 1.5 metres in depth and getting out in any type of soil.

M&L hard core of gauge n'exc 63mm deposited, spread and levelled in layer n'exc 15 cm thick watered and rammed to a true surface using broken stone or boulders.

M&L 75mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in path /plinth protection & hard standing, sub base finish even & smooth without using extra cement all as specified and directed.

M&L PCC 1:3:6, type C2 using 40mm gd stone aggs as in fdn filling and mass concretre complete all as specified and directed

M/L 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth complete all as specified & directed.

M&L Machine pressed precast concrete coloured Inter locking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment over sand cushion & laid over sub base all as specified and directed.

M & L Sand filling under floors including watering and consolidation

M/L brick work with sub class B bricks built in CM 1:6 straight or curved exceeding 6m mean radius all as specified.

Removing excavated materials (soils) to a distance not exc. 50 metre and depositing where directed at a level not exc. 1.50 above the starting point complete all as specified and directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick as in soft/loose soil complete all as specified and directed.

S&F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, Chhaja, etc fixed with self tapping screws as specified.

S&F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in Ridge,etc with self tapping screws or J hooks as specified.

Excavating in soft/ loose soil as in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface

M&L PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling.

M&L PCC (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete, complete all as specified and directed by EIC

M/L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, cills, coping, bed plates/blocks for hold fasts etc including necessary use & waste of form work complete all as specified

M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in surface channels and drains complete all as specfied and directed

M/L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces finished even and fair complete all as specified & directed.

S/F mild steel work as in tubular post and the like conforming to FE-410-W, Gde E-250, quality-A, complete all as specified and directed by EIC

S/F rolled mild steel structural work as in joist, channel, angle or tee/tubular section, fixed independently without connecting plates etc cut to ordinary lengths. conforming to FE-410-W, Gde E-250, quality-A, complete all as specified and directed by EIC.

M/L preparation of new steel surfaces of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified & directed.

Preparation of new palster surface of wall and applying three coats of white wash complete all as specified & directed

M/S SHAMBHU SHARAN SINGH (BID ID -3166366)

jai maavindwashni sales & supply (BID ID -3165817)

BHARATI ENTERPRISES (BID ID -3166712)

M/S JAI MATA DEE CONTRUCTION CO. (BID ID -3166206)

M K Enterprises (BID ID -3165730)

M/S ABDHESH CONSTRUCTION (BID ID -3165958)

india trading company (BID ID -3166515)

ISHAAN ENGINEERING (BID ID -3162993)