works for effecting services in various schemes in Sampally Section in Mettur division

Amount

Work contract schedule

Excavation of pole pit upto 27" (8.0 m) Pole by using JCB

Excavation of pole pit for 30' RCC Pole/9.00m PSC Pole by using JCB or manual

Excavation of Stay pit 4.5' to 5' depth by using JCB or manual

Hard rock requires blasting

Hard rock without blasting (where houses are located)

Erection of PSC/RCC poles upto 8.00m. (27' ) by using Crane or manual

Erection of PSC/RCC poles upto 9.14m.( 30' ) by using Crane or maual

Erection of stay set complete

Fixing of HT "V" cross arms(all types) / channel cross arms/ guarding Cross arms

Fixing of HT pin Insulators 11 KV

Fixing of HT 11 KV strain disc.

Fixing of LT 3 phase cross arms

Fixing of LT Single phase cross arms

Fixing of HT/LT TI Fittings

i) Fixing of LT pin Insulator

ii) Fixing of LT shackle

iii) Fixing of Aluminium Knob

Paving and Stringing of 7/3.35 mm ACSR 7/3.0 mm AAAC

Paving and stringing of 7/2.59 mm/ ACSR 7/2.11 mm ACSR

Sleeve concreting including materials (Cement + River Sand/ M sand and Blue metals and watering)

Erection of Single Pole Transformer structure complete in all respects with wiring, Earthing, fixing of open type fuse units, HT/LT LAS and jumpering 3 Nos. Earth pit with collar including painting of metal parts, structure poles, fixing of tapping channel, transformer bed structure including concreting (Except erection of Transformer)

Erection of New Transformer all Capacities

Loading & Unloading of Transformer above 100 and upto 200

Transport of poles/Materials/ conductors and others. Below 8 Kms.

Loading of materials

Unloading of materials

Loading of Poles(7.5/8.0/9.14M)

Unloading of Poles(7.5/8.0/9.14M)

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual beyond 100 m

Transporting of poles from road side to pole pit including loading and unloading of poles by using JCB or manual up to 100 m

Alteration of Back clamp/Stay clamp

Drilling of hole in channel only 3/4" & 1" per hole

Cutting of flat

Earthing of pole with coil earthing including burying looping and binding.

Dismandling of RCC/PSG pole 8.0mtr/7.5mtr

Dismandling of 'V' X arm,channel X arm,guarding X arm(all types)

Dismandling of 22KV pin insulator

Dismandling of HT 11 KV strain disc.

Dismandling of LT single phase X arm

Dismandling of LT 3 phase X arm

Dismandling of LT shackle

Dismandling of LT pin insulator

Dismandling of Aluminium knob

Dismandling of stay set

Dismandling of ACSR 7/3.35mm conductor

Dismandling of ACSR 7/2.59mm/ 7/2.11mm conductor

Releasing of grills from RCC Poles

Releasing of 3 phase service and (upto 50 HP) re-fixing.

Releasing of single phase service and re-fixing.

G.S.T. @18% should be Entered by the Bidder