119(W)/EDCS/2023-24

Amount

Safe Carriage of Following line materials for 11 KV Line from Store Center to the actual site of work including measuring, weighing, loading, unloading at both ends and proper stacking at site.

STP SUPPORT 11.00 METER LONG FROM STORE BYEBAGH TO VARIOUS SITES UNDER EDD-II INCLUDING LOADING AND UNLOADING BOTH SIDES

PCC POLE SUPPORT 9.0 METER LONG FROM STORE BYEBAGH TO VARIOUS SITES UNDER EDD-II NCLUDING LOADING AND UNLOADING BOTH SIDES

100 KVA 11/0.430 KVA 3 PHASE TRANSFORMER

250 KVA 11/0.430 KVA 3 PHASE TRANSFORMER

ACSR WEASEL CONDUCTOR

11 KV CROSS ARM

ABC CABLE 3X120+1X35+1X16 SQ MM FROM STORE BYEBAGH TO WORK SITES INCLUDING LOADING AND UNLOADING BOTH SIDES

LT XLPE CABLE 1*240 SQMM

THREE PHASE DISTRIBUTION BOX

Disc insulator 11 KV

PIN INSULATOR

TOP CHANNEL, 125*65*2240

DROPPER CHANNEL100*50*2028 mm

BASE ANGLE (75*75*6*2028)

11 KV MS T OFF CHANNEL

PIPE EARTHING

STAY SET

SAFE CARRIAGE OF 11 KV TPMO

ERECTION OF ST SINGLE POLE 11.00 METER LONG, AND FIXING OF NECESSARY SINGLE POLE ACCESSORIES AS PER RESSPO NORMS. (ALL DECENTRALISED MATERIAL WILL BE PROVIDED AND ARRANGED BY THE CONTRACTOR)

ERECTION OF PCC DOUBLE POLE 9.0. METER LONG, AND FIXING OF NECESSARY DOUBLE POLE ACCESSORIES AS PER RESSPO NORMS. (ALL DECENTRALISED MATERIAL WILL BE PROVIDED AND ARRANGED BY THE CONTRACTOR)

MOUNTING OF 250 KVA NEW TRANSFORMER AT NEWLY CONSTRUCTED PLINTH INCLUDING FIXING ALL REQUIRED ACCESSORIES, MAKING CONNECTION, ENERGISATION, COMPLETE IN ALL RESPECT. (ALL DECENTRALIZED MATERIAL WILL BE ARRANGED BY THE CONTRACTOR)

MOUNTING OF 100 KVA NEW TRANSFORMER AT NEWLY CONSTRUCTED DOUBLE POLE STRUCTURE INCLUDING FIXING ALL REQUIRED ACCESSORIES, MAKING CONNECTION, ENERGISATION, COMPLETE IN ALL RESPECT. (ALL DECENTRALIZED MATERIAL WILL BE ARRANGED BY THE CONTRACTOR)

MAKING OF CAZE WIREMESH FENCING WITH PROVISION OF ENTRY GATE AROUND THE PLINTH (250/400 KVA T/f) ON THAT TOE WALL WITH 01 INCH SQUARE NET TO AVOID ELECTRIAL ACCIDENT OF HUMAN/ ANIMAL WITH PAINTING OF FENCING WITH 02 NO. COAT OF RED OXIDE PAINT AND 01 NO. SILVER PAINT COMPLETE IN ALL RESPECT.

CONSTRUCTION OF PLINTH 2 METER X 2METER X 1.5 METER FOR 100/250/400/630 KVA. TRANSFORMER. PLINTH WALL SHALL BE MADE OF BRICK/ STONE MASONRY OF 230 MM THICK, OUTSIDE OF THE WALL TO BE PLASTERED WITH 18 MM THICK CEMENT MORTAR (1:3), INSIDE OF THE PLINTH SHALL BE FILLED WITH BORROWED SAND DULY COMPACTED R.C.C. TOP SLAB (1:2:4) SHALL BE 75 MM THICK (CONSTRUCTION OF PLINTH SHOULD COMPLY WITH RESSPO NORMS) ALL DECENTRALISED MATERIAL WILL BE ARRANGED AND PROVIDED BY THE CONTRACTOR.

LAYING OF LT ABC CABLE 3*120+1*35+1*16 SQ MM ON POLE

STRING AND SAGGING OF ACSR WEASEL CONDUCTOR

Laying of LT XLPE CABLE 1*240 SQMM

INSTALLATION OF 3 PHASE D.O. FUSE SET

INSTALLATION OF 11 KV TPMO

AL LUGS 240 SQMM

CONCRETING OF STP POLE

Laying OF 11 KV FUSE SET

Laying of LT Tailless Unit

INCREASING CAPACITY

Description (ALL DECENTRALISED MATERIAL (SUCH AS AL. LUGS, GROUTING MATERIAL, FENCING MATERIAL)WILL BE ARRANGED AND PROVIDED BY THE CONTRACTOR.

SAFE CARRIAGE OF LT CABLE 1X400 MM SQ MM FROM STORE BYEBAGH TO VARIOUS SITES INCLUDING LOADING AND UNLOADING BOTH SIDES

SAFE CARRIAGE OF 400 KVA DTR FROM STORE BYEBAGH TO VARIOUS SITES UNDER INCLUDING LOADING AND UNLOADING BOTH SIDES

SAFE CARRIAGE OF 250 KVA DTR FROM STORE BYEBAGH TO VARIOUS SITES UNDER INCLUDING LOADING AND UNLOADING BOTH SIDES

CONSTRUCTION OF PLINTH OF SIZE 2.0X2.0X1.5 Mtr. CONSISTING EARTH WORK IN EXCAVATION, C.C. WORK IN RATIO 1:4:8, Ist CLASS BRICK WORKS IN 1:4:6, R.C.C. WORK IN RATIO 1:2:4 AND PLASTER WORK OF 10 MM THICKNESS IN RATIO 1:4.

EARTHING OF DISTRIBUTION TRANSFORMER OF 400/250 KVA BY EARTHING CHEMICAL BY DIGGING / DRILLING OF PIT APPROX 10 FIT (L.S.3 MTR) DEPTH AND INSERTING G.I. PIPE OF 1.25" DIA OF 'B' GRADE AND THEN FILL UP THE CHEMICAL WITH WATER AND COMPLETE TO THE REQUIREMENT. TWO NO. OF EARTHING OF EACH TRANSFORMER ONE FOR THE TRANSFORMER NEUTRAL AND ANOTHER FOR TRANSFORMER BODY, DOUBLE POLE & EQUIPMENT ETC. TO BE DONE. THE TOP OF THE INSERTED PIPE TO BE CONNECTED TO THE NEUTRAL AND TRANSFORMER BODY THROUGH G.I. STRIP WITH THE HELP OF NUT AND BOLT OR BY WELDING AS PER DIRECTION OF THE AUTHORISED REPRESENTATIVE OF THE DEPARTMENT. IT INCLUDES THE COST OF ALL MATERIALS, LABOUR, T&P PROVIDE BY THE CONTRACTOR FOR PROPER COMPLETION OF WORK.

PROPER WIRE MESH FENCING OF 630/400/250 KVA TRANSFORMER ALONGSIDE THE PLINTH. THE HEIGHT OF THE FENCE SHOULD BE 7 FEETS ABOVE FROM GROUND, PROVIDING FABRICATION AND FIXING THE MAIN GATE IN FRONT OF THE PLINTH WITH PROVISION FOR LOCKING SYSTEM. PAINTING OF ENTIRE METAL WORKS/ MAIN GATE WITH WIRE MESH WITH BUS GREEN SUPER ENAMELED PAINT IN TWO COATS ON THE PRIMER COAT OF RED OXIDE. COMPLETE IN ALL RESPECT

REMOVING ALL OLD CONNECTIONS, UNMOUNTING OF OLD 250 KVA TRANSFORMER

REMOVING ALL OLD CONNECTIONS, UNMOUNTING OF OLD 100 KVA TRANSFORMER

MOUNTING OF 400 KVA NEW TRANSFORMER AT OLD CONSTRUCTED PLINTH INCLUDING FIXING ALL REQUIRED ACCESSORIES, MAKING CONNECTION, ENERGISATION, COMPLETE IN ALL RESPECT. (ALL DECENTRALIZED MATERIAL WILL BE PROVIDED ARRANGED BY THE CONTRACTOR)

MOUNTING OF 250 KVA NEW TRANSFORMER AT NEWLY CONSTRUCTED PLINTH INCLUDING FIXING ALL REQUIRED ACCESSORIES, MAKING CONNECTION, ENERGISATION, COMPLETE IN ALL RESPECT. (ALL DECENTRALIZED MATERIAL WILL BE PROVIDED ARRANGED BY THE CONTRACTOR)

RECEIVED BACK OF OLD 250 KVA TRANSFORMERS FROM VARIOUS WORK SITES TO CENTRAL STORE CENTER, BAIBAGH, SHAJAHANPUR INCLUDING SAFE LOADING AND UNLOADING BOTH SIDE

RECEIVED BACK OF OLD 100 KVA TRANSFORMERS FROM VARIOUS WORK SITES TO CENTRAL STORE CENTER, BAIBAGH, SHAJAHANPUR INCLUDING SAFE LOADING AND UNLOADING BOTH SIDE

PROVIDING AND FIXING OF LT TAILLESS UNIT 400 AMP., COMPLETE JOB AS PER RESSPO SPECIFICATION. ( TAILLESS UNIT WILL BE ARRANGED AND PROVIDED BY THE CONTRACTOR.)

PROVIDING AND INSTALLATION OF AI LUGS FOR 400 SQ MM CABLE

M/S BEG ENTERPRISES