BARC/TSD/2/2022-23

Amount

Routine/Preventive/Breakdown Maintenance of following AHUs with motor (List as per Annexure - I) as per clause no. 1 of specification. (Only installation column shall be filled)

Capcity of AHU's 50 TR, (3 nos. Motor-of 20 HP, 4 nos. of 15 HP)

Capcity of AHU's 40 TR ( Motor-15HP)

Capcity of AHU's 30 TR (7.5 HP Motor -02 Nos. in each AHU & 10 HP motor in 2 nos. AHU)

Capcity of AHU's 28 TR ( Motor- 10HP in 5 nos. AHU & 7.5 HP motor in 1 no. AHU)

Capcity of AHU's 20 TR ( Motor-7.5 HP)

Capcity of AHU's 20 TR ( 5HP Motor- 02 Nos. Each AHU)

Capcity of AHU's 8 TR ( Motor-3HP)

Cleaning / washing of HDPE air filters (List as per Annexure- -II) as per clause no. 2 of specification. (Only installation column shall be filled)

Routine/Preventive/breakdown Maintenance of following pumps (Annexure -III) as per clause no. 3 of specicification. (includes motor, coupling, suction valve , discharge valve, NRV, strainer and pressure gauges )

Chilled Water Booster Pump- Motor 30 HP ( Sealing Type :-Mechanical Seal )

Chilled Water Booster Pump- Motor 25 HP ( Sealing Type :-Mechanical Seal )

Chilled Water Booster Pump , Motor-10 HP ( Sealing Type :- Mechanical Seal )

Chilled Water Booster Pump-Motor 10 HP ( Sealing Type _ Gland Packing )

Fire Hydrant Pump- Motor 20 HP (Type :- Mechanical Seal )

Service Water Supply Pump- Monoblock 7.5 HP

Centrifugal Pump- 1HP ( Motor coupled with tyre coupling )

Sump pumps

Mono Block Centrifugal Pump- 1HP

Portable fountain Pump- 5HP

Monoblock Centrifugal Pump-3HP

Portable Sump Pump- 5HP

Comprehensive Maintenance of exhaust fans (List as per Annexure-VI) as per calause no. 5 of specification

Routine & breakdown Maintenance of Tube Axial Fans as per clause no. 5.1 of specifications.

Comprehensive Maintenance of propeller type three phase exhaust fans as per clause no. 5.2 of specification.

Comprehensive Maintenance of Exhaust Blowers as per clause no. 5.3 of specification.

Routine & breakdown Maintenance of Tube Axial Fans of VIP canteen exhaust system as per clause no.5.4 of specifications.

Cleaning of grease filters installed on Central Complex Canteen kitchen hoods as per clause no. 6 of specification.

Cleaning and painting of kitchen hoods of Central Complex Canteen as per clause no. 7 of specification.

Supply and installation of ducting fabricated out of the following sizes of G.I. sheet as per clause no. 8 of the specification.

18 gauge G.I. sheet (1.25mm) ducting

22 gauge G.I. sheet (0.8 mm) ducting

Supply and installation of cold insulation with materials closed rubber cell insulation including 24 gauge aluminium clading for chilled water piping, valves, strainers, NRVs, pumps etc. as per clause no. 9 of specification.

Supply and installation of M.S. supports as per clause no. 10 of specification.

Emergency breakdown repair by welding of pipe and structural material complete with final run and DP test. as per clause no. 11 of specification.

Painting of M. S. Support as per clause no. 12 of specification.

Supply, installation, testing, commissioning & replacement of class 'C' old/defective GI pipeline. as per clause no. 13 of specification.

Collection and transportation of waste material of AHUs, pumps, valves, pipe line, ducting, filters, grilles etc. (after removing insulation) from different locations inside BARC campus and shifting to a desired place within BARC as decided by EIC in a truck with required manpower.