PROVN OF FLASE CEILING, ALUMINIUM DOOR AND WINDOWS OF OFFRS MESS BC 77 AT THE MARATHA LIRC , PROVISION OF ALUMINIUM SLIDING WINDOWS ALONGWITH GUARD BARS AND TILING IN BLDG NO 86 1 to 8 AT LAXMI TEK ,SPECIAL REPAIR TO SEWAGE LINE AND DRAINS AT LAXM

Amount

Supply and fix Suspended false ceiling system with 16mm thick mineral fibre acoustical MINA TUFF EDGE TILES (MIRO LOCK) ,white ,fibre performance Class-I (BS 456,Part 6&7) with bio coating on the exposed face of tiles,module size 600mm x 600mm, laid on 15mm thick SILHOUTTE EXPOSED GRID system,with minium load carrying capacity of 11.68 Kg/Sqm,white/black colour complete all as specified and as directed.

Material and labour for Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm including provision of 4mm sheet glass ordinary quality for panels and stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40mm for panel and provision of all hardware fittings such as aluminium anodised handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed. Note:(i) Each window shall be provided with 2 Nos. of glazed shutters + 1 No. of wire mesh shutter of required size.Notes: (ii) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets etc (iii) Thickness of Anodisation shall be of 15 micron . (iv) Make of Aluminium section : :Jindal/Hindalco/Indal

Material and labour for Aluminium anodised doors standard section of size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet glass ordinary quality in top pannel and 12mm thick pre laminated particle board exterior grade pre laminated both sides with decorative choice lamination includind fitting etc with Aluminium die cast body hydraulic door closer ,designation no :01 , universal type ,Aluminium ,handle,Aluminium mortice lock heavy duty vertical type , size 100 mm and Double action floor door spring heavy duty ,hydraulically regulated made up of 1.25 mm thick aluminium alloy sheet foundation box ,main body with stainless steel cover ,governing pivot made of brass and other parts made of mild steel etc complete all as specified and directed.

Notes: (i) The rate quoted by the contractor shall be deemed to include necessary grouting/ embedding of the aluminium frames/ supports into floors/ walls and making good the disturbed surfaces to match with the existing surfaces and provision of necessary rubber gaskets etc (ii) Thickness of Anodisation shall be of 15 micron . (iii) Make of Aluminium section : :Jindal/Hindalco/Indal (iv) Make of Hydraulic door closer/Floor spring : Everite/Hardwyn (v) Make of mortice lock :Godrej/Harrison/Dhanraj (vi) Make of Glass : Saint gobain/Modi guard/Gold Fish (vii) Make of Prelaminated particle board : Kitply /Centuary/Novopan/Anchor

Material and labour for Machine cut Granite stone tiles, 20mm thick, Premium quality, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the tiles over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Taking down chowkhat with shutters (without taking off shutters from the frame) area not exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Material and labour for Rendering 10mm thick in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall , pilasters, cornices, etc. and applying two coats of oil bound distemper (Acrylic distemper washable), any colour,over a coat of 1mm thick layer of wall care putty complete all as specified and as directed.

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; framed ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc complete all as specifed and as directed.

Material and labour for Premium quality Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed of 15mm thick in CM 1:6 all as specified and as directed.Note : Make of Vitrified Tile : M/ S Naveen Tiles /M/S Khajaria /M/S Somany

Material and labour for Premium quality Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade, area of each tiles not exceeding 0.36 sqm, in skirting /dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick backing coat in CM 1:4 complte all as specified and as directed. Note : Make of Vitrified Tile : M/ S Naveen Tiles /M/S Khajaria /M/S Somany

Material and labour for Premium quality Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over screed bed of 15mm thick in CM 1:6 complete all as specified and as directed.Note : Make of Ceramic Tile : M/ S Naveen Tiles /M/S Khajaria /M/S Somany

Excavation over areas not exceeding 1.5 metre deep and getting out in soft / loose soil etc complete all as specified and as directed.

Returning filling in including spreading, leveling, watering in layers n. exc. 15cm thick in soil complete all as specified and as directed.

Removing excavated soil n. exc. 50m and depositing where directed at a level n. exc. 1.5m above starting point complete all as specified and as directed.

Material and labour for Plain Cement Concrete (1:4:8) type D2 using 40 mm graded aggregate as in foundation, filling and mass concrete etc complete all as specified and as directed.

Material and labour for Providing Plain Cement Concrete (1:2:4) type B1 using 20 mm graded aggregate as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, coping, kneelers, apex stones etc water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary form work etc complete all as specified and as directed.

Material and labour for Precast cement concrete block masonary 1:3:6 type C1 using 20mm graded stone aggregate with solid blocks, exc 10cm in width and setting in cement mortar 1:6 complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar 1:4 on fair faces of brick wall or concrete surfaces, finished the surfaces even and fair without using extra cement complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a one coat of chalk whiting primer complete all as specified and as directed. . .

Excavation in trenches n exceeding 1.5 metre wide and n exc 1.5 metre deep for foundations etc n exc 10 Sqm on plan and getting out in hard/dense soil complete all as specified and as directed. . .. .

Material and labour for Plain cement concrete 1:3:6, type C1 using 20 mm graded stone aggregate, as in coping including necessary form work complete all as specified and as directed.

Material and labour for Rendering 15mm thick in CM 1:4 using water proofing compound finishing surface even and smooth without using extra cementcomplete all as specified and as directed. . Note: Water proofing compound shall be measured and paid separately.

Supply only water proofing compound.Make :Impermo/Cico/Roff

Material and labour for 200mm RCC pipes class NP-2 (ISI MARKED) laid in trenches and jointed in cement mortar 1:3 complete with collar inclding demolition and breaking up PCC and SGSW/RCC drain pipes jointed in cement mortar and taking out from trenches and removal of debris off the premises complete all as specified and as directed. . .

Material and labour for concrete bed to drain pipe 200mm dia including packing under and haunching against the sides of pipes after they laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed. . .

Material and labour for PCC 1:2:4 type B1 using 20 mm graded aggregate as in surface channel/ benching inside the manhole complete all as specified and as directed. . .

Material and labour for Precast RCC slab 1:2:4 type B-1 using 20mm graded stone aggregate as in manhole cover slab set in CM 1:6 including necessary moulds ,form work complete all as specified and as directed. . .

Material and labour for MS TMT bar 8mm dia cut to length bent to shape required including cranking ,bending spirally for hooping for columns ,hooking ends and binding withand including mild steel wire not less than 0.9mm dia complete all as specified and as directed

Demolition of Precast RCC manhole cover slab of any description and in any position (reinforcement cut as required to facilitate demolition) and removal of debris off the premises and scrap iron taken as credit complete all as specified and as directed.

Demolition of brick/stone work masonry wall built in cement mortar of any descriptionand in any position and removal of debris off the premises and serviceable items taken as credit complete all as specified and as directed.

Material and labour for Cutting into existing man hole for connecting new drain pipe of 200mm internal dia making good to pipe and rendering cutting out existing benching for and forming bench channel (half round or 3/4 section) in cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate smooth finished and re forming benching as required complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:2:4, type B1 (using 20 mm graded stone aggregate) as in haunching / channel inside manholes, surfaces finished even and smooth using extra cement, including necessary formwork complete all as specified and as directed

M/s. KIRAN M CHOUGULE

ASHOK M RAJGOLKAR

M/S MAHADEV M PATIL