ADDN /ALTN TO DINING HALL, COOK HOUSE AND WASHING BAY OF SNCOs MESS AT VSN, NAGPUR

Amount

Dismantling of wall and celling board (fiber, pulp, insulation, etc) or insulation board / slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

Material and labour for exposed metal frame ceiling with non asbestos fibre cement building boards of 4mm thick of 600mm x 600mm size fixed or laid / inserted to GI framework with appropriate numbers of hangers with screws complete all as specified and as directed.

Material and labour for providing 10mm thick Plaster of Paris (POP) false ceiling (gypsum anhydrous) to flat or curved surface as per design approved over GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (of any length) of 0.55 mm thickness having curled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre all as per manufacturer’s instructions including two coats of oil bound distemper over a coat of primer over a coat of putty complete all as specified and directed.

Dismantling asbestos cement, galvalume, fiber sheet (Plain, corrugated , semi-corrugated, etc.) sheet in roof covering complete all as specified and directed.

Supply and fixing Pre- painted GalvaIume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws etc complete all as specified and directed.

Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing of Steel work in tubular section as in trusses, post, purlin, rafter etc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 complete all as specified and directed.

Material and labour for preparing new surfaces of steel of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Material and labour for 18-20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and similar situations complete all as specified and directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed 20 mm thk in cm 1:6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and wax polishing complete all as specified and directed.

Material and labour for grinding and polishing of existing floor of stone slab like marble, granite, kota etc by using mechanical grinder/floor polish machine and finally cleaning and treating the surface with beeswax polish etc complete all as specified and as directed.

Surface excavation not exec 30 cm deep & average 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. Note : - All demolished items/ debris to be removed out side of MoD land.

Material and labour for plain cement concrete Type D-2, (1:4:8) (using 40 mm graded crushed stone aggregate) in foundation, sub base, below floor, filling and mass concrete etc complete all as specified and as directed.

Material and labour for factory made Machine pressed rubble moulded precast conctete interlocking paver block any shape and size with grey cement and pigments confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 40 mm thick stone dust cousioning complete all as specified and directed.

Material and labour for 25 mm thick cement concrete type B-0, 1:2:4 (12.5 mm graded aggregate) as on floor complete all as specified and directed.

Material and labour for polished chequered cement concrete tiles with grey pigment cement and pigments of size 30cm x 30cm x 25mm thick, set, jointed and pointed in coloured cement to match with the tiles over and including 20 mm thick screed bed in CM 1:6 in floors etc complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for premium quality non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the tiles including 15 mm thick screed bed 1:6 complete all as specified and directed.

Material and labour for premium quality digital glazed ceramic coloured tiles of approved quality ISI marked (450 X 350 X 7 mm / 450 x 300 x 7 mm / 600 x 300 x 7 mm thick) as in vertical surfaces such as skirting dados etc set jointed in neat cement slurry and pointed in coloured cement to match with the tiles including 1:4 cement plaster 10 mm thick on brick work and concrete surface complete all as specified and directed.

Supply and fixing any shade/double charged/ultracharged vitrified tiles 10 mm thick (square/ rectangular) polished area of each tiles exc 0.42 sqm but not exceeding 1.00 sqm in floors, parking etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in dark shade including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply and fixing light shade vitrified tiles 10 mm thick (square/rectangular) polished area of each tiles exc 0.36 sqm but not exceeding 1.00 sqm on vertical surfaces such as skirting, dado, risers to steps etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade including 10 mm thick rendering in cm (1:4) as in back coat complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each and removal from site complete all as specified and directed.

Taking down chowkats or frame with shutter (without taking out shutter from the frame) exceeding 1.50 sqm and n exc 4.00 sqm each and removal from site complete all as specified and directed.

Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in Charge. Notes: (i) Glass shall be measured and paid separately under relevant item. (i) For UPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (ii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made to contractor by department.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension, comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Notes: (i) Glass shall be measured and paid separately under relevant item. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (iii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made to contractor by department.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Notes: (i) Glass shall be measured and paid separately under relevant item. (ii) For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. (iii) Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made to contractor by department.

Material and labour for aluminium framed doors/windows/ventilators sections any pattern, fixed/side hung/silding (two or three track) using powder coated alluminium sections, of approved make with or with out sash bars suitable for glazing/gauzing including necessary jointed cleats, etc complete all as specified and as directed. Note: glazing/gauzing shall be measured and paid separatly under relevant item.

Supply and fixing for factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube fixed in opening complete as per manufacturer's specifications and as directed.

Supply and fixing for 30 mm thick factory made solid panel PVC door shutter conferming to criteria of testing as per IS : 4020, consisting of frame made out of MS tube of 19 guage thickness & size 19x19mm for stiles and 15x15mm for top & bottom rails MS frames shall have a coat of red oxide primer of approved make and shall be covered with 5mm thick heat moulded PVC `C' channel of size 30x50mm forming styles and 5mm thick 75mm wide PVC sheets for top rail lock rail and bottom rail on either side and 10mm (5mmx2) thick 20mm wide cross PVC sheet as gap insert for top rail and bottom rail panelling of 5 mm thick PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rail with 30 mm wide x 5 mm thick PVC sheet beading on either side and joined together with solvent cement, adhesive and an additional 5 mm thick PVC strip of 20 mm width is to be struck on the interior side of 'C' channel using PVC solvent adhesive complete as per manufacturers specifications & drawings ass as directed by Engineer-in-Charge.

Supply and fixing for 100mm long mild steel butt hinges, heavy weight cold rolled mild steel and fixed complete all as specified and as directed.

Supply and fixing 150 mm long aluminium anodised handles, cast type complete all as specified and as directed.

Supply and fixing 300 mm long aluminium alloy, anodised, sliding dooor bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fixing for 200 mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Material and labour mild steel frame work such as gates, grills with ends of bar shouldered, welded or forged into spikes conforming to Fe 410-0 complete all as specified and as directed.

Supply and fixing of double action floor spring hydraulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed.

Supply and fixing mild steel 4 levers Mortice lock, vertical type, size 100 mm complete all as specified and as directed.

Supply and fixing Door closer hydraulically regulated, designation No 3, aluminium (die cast ) body, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed including taking down old one complete all as specified and as directed.

Material and labour for 12 mm thick block boards, grade 1 quality exterior grade, decorative type with decorative face veneer on both faces fixed with any metal/wooden frame etc complete all as specified and as directed.

Supply and fixing Sheet glass, ordinary quality in square but exc 0.50 Sqm each pane, 5.5 mm thick fixed to any metal/PVC/UPVC section complete all as specified and as directed.

Supply and fixing Sheet glass, ordinary quality in square not exc 0.50 Sqm each pane, 4 mm thick fixed to any metal/PVC/UPVC section complete all as specified and as directed.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of decorative type harrison rail mild steel chromium plated of 25mm dia for curtain rod fixed with two Nos of decoratice brackets, stops for each rail complete all as specified and as directed.

Demolition of brickwork or stone /boulder masonry built in cement mortar complete all as specified and directed.

Material and labour for Brickwork with fly ash Bricks, straight or curved in plan exc 6 m mean radius built in CM(1:6) complete all as specified and as directed.

Material and labour for Brickwork with fly ash Bricks, straight or curved in plan to any radius in half brick thick wall in CM(1:4) complete all as specified and as directed.

Material and labour RCC (Nominal mix) type B1 1:2:4 (20mm graded aggregate) for Beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces complete all as specified and as directed.

Material and labour mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia. or securing with complete all as specified and as directed.

All as per item No 51 above but 5 mm dia & over upto & incl 10 mm dia in stirrups

Taking down cement plaster on brick or stone wall,concrete, etc including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:6 over brick /stone wall/block wall/concrete surfaces finished even and smooth without using extra cement all as specified and as directed.

Material and labour rendering 15mm thick on fair finish of bricks/concrete/stone surface of wall in CM (1:4) using WPC and finished the surface even and smooth without using extra cement (WPC to be mesuared and paid separately) complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified and directed.

Material and labour preparation of old distempered sufaces of walls by washing, rubbing down and stopping of distempered surfaces incl repair of damaged portion by applying wall care putty to achieved smooth surface and applying two coats of oil bound distemper with roller on walls complete all as specified and as directed.

- Ditto - as per item No 57 above but one coat of oil bound distemper with roller on ceiling complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces of walls and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying 2 coats of oil bound distemper with roller over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for preparation of new plastered wall surfaces and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Material and labour for complete removal of existing treatment of wall surfaces and applying 1mm thick wall care putty and making the surface even & smooth by rubbing and applying one coat of alkali resistant primer and applying distempering two or more coats with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete all as specified and as directed.

Material and labour for complete removal of existing treatment by washing, rubbing down and stopping of painted surfaces of walls, chajjas, columns, beams etc and applying 1mm thick wall care putty in two layers of opposite direction for making the surface even & smooth and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm complete all as specified and as directed. Note :- Shade and pattern of the colour to be approved by GE.

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Dismantling of old textile roof treatment of any type including roof tiles (if any) including cleaning the concrete surfaces of RCC roof slab thoroughly with wire brushes, washed and dried. etc all as specified and as directed.

Material and labour for PCC 1:2:4 type B-0 using 12.5 mm graded stone aggregate RCC roof slabs to fill undulations to achieve uniform slope complete all as specified and directed.

Material and labour for rendering over roof slab 10 mm thick in CM 1:3 on concrete surfaces mixed with water proofing compound @ 3% by weight of cement and finished surfaces fair and even without using extra cement all as specified and directed. Note : WPC shall be measured and paid separately

Material and labour for applying bitumen primer @0.30 Ltr/sqm evenly over plastered suface complete all as specified and directed.

Supply and fixing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by torch application complete all as specified and as directed.

Material and labour for applying bitumen base aluminium paint at 0.2 kg/Sqm in two coats over APP modified polymer for non accessible roof.

Material and labour for repair of joints of old APP membrane as in roof, chajja, parapet etc sealing with torching method including fixing of new APP membrane with primer and any other adhesive where is required etc complete all as specified and as directed.

Taking down or up 15 mm bore dia galvanised iron tubing and connection including cleaning for refixing or removal all as specified.

All as per item No 71 above but 20 mm bore dia.

All as per item No 71 above but 25 mm / 32 mm bore dia.

Supply and fixing GI tubing medium grade with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified.

All as per item No 74 above but 20 mm bore dia.

All as per item No 74 above but 25 mm bore dia.

Dismantling water tanks after disconnecting exc 500 ltr but n exc 1000 ltrs complete all as specified and as directed.

Refixing of water tanks exc 500 ltr but n.exc 1000 ltrs capacity after cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc complete all as specified and directed.

Supply and fixing in repair Rotational moulded polyethylene water storage tanks of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply & fixed in repairs 20 mm bore brass ball valves, high pressure with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply & fixed in repair 20 mm bore Gun-metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe and water tank nipal fixed complete all as specified and directed.

Supply and fixing vitreous China wash down water closet pan (padestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including plastic water closet seat (white or black in colour) , closed pattern with flat bottom, and cover and mild steel chromiuum plated or cluminised hinging device also making good to floor complete all as specified and directed.

Supply and fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including trap set in and including concrete and connection to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and directed.

Supply and fixing PVC low level fluslhing cistern of 10 lit capacity inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete all as specified and directed.

Supply and fixing in repairs vitreous china urinals, flat back, bowl type of size 465mmX355mmX265mm,white with grating and union for discharge pipe including connecting to waste pipe complete all as specified and directed.

Supply and fixing in repairs of vitreous china wash hand basin, white, flat back of size 550 x 400 mm including waste coupling, CI brackets, PVC waste pipe and connection 32 mm bore c complete all as specified and directed.

Supply and fixing in repairs of 15mm bore pillar taps, fancy type (long body), (Weight not less than 622 gms), cast copper alloy with capstan heads, Decorative type chromium plated screwed down, high pressure screwed for iron pipe complete all as specified and directed.

Supply and fixing in repair chromium plated concealed type stop valves (Weight not less than 575 gms), cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed.

Supply and fixing Chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union as in repairs complete all as specified and directed.

Supply and fixing Hand Shower (Health Faucet) (ABS Body) with 8mm Dia, 1.5 metre Long Spirochrome flex tube & wall hook complete all as specified and directed. Make ;-Jaquar model no-ALD 587 or equivalent in Cera/ Parryware

Supply and fixing decorated type two way bib cock chromium plated quarter turn with wall flangecomplete all as specified and directed. Make- Jaquar, model No FLR-5041N or equivalent in Cera/ Parryware

Supply and fixing in repair 15 mm bore chromium plated fancy type bib taps, (Weight not less than 575 gms), cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fixing in repair chromium plated fency type stop cock/angular cock (Weight not less than 575 gms), cast copper allay, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore complete all as specified and directed.

Supply and fixing PVC connection 15 mm size with PTMT nuts of length 450 mm of approved quality complete all as specified and directed.

Supply and fixing of decorated type looking mirror of area exceeding 0.5 sqm but not exc 1.50 sqm, 6-8 mm complete all as specified and directed. Note : Design and pattern shall be approved by GE

Supply and fixing soap dish brass chromium plated decorative type approximate size 160x90mm complete all as specified and directed.

Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fixing brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges fixed with wall complete all as specified and directed.

Taking down rain water or soil waste pipes (any size or pattern) ,including all fittings complete all as specified and directed.

Material and labour for PVC (SWR) pipe of 110 mm bore single socketed in any length with rubber ring joint fixed to wall with suitable clamps of adequate numbers or in floors etc complete all as specified and directed.

Supply and fixing PVC(SWR) Bend 110mm bore complete all as specified and as directed.

Supply and fixing PVC(SWR) Tee 110mm bore complete all as specified and as directed.

Supply and fixing PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to floor/wall all as specified and directed.

Supply and fixing PVC (SWR) bends, 75 mm bore all as specified and directed.

Supply and fixing PVC(SWR) Tee 75 mm bore complete all as specified and as directed.

Material and labour for PVC (SWR) floor trap with grating, 75 mm bore, including jointing to waste pipe with solvent cement including taking down of existing old trap all as specified and directed.

Supply and fixing 40 mm bore low density polyethylene pipes (LDPE) of pressure rating 6 kgf/Sq cm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed.

Excavation in trenches n.exc. 1.50 m deep and n.exc. 1.50 m wide in soft / loose soil for drain pipes, manholes etc complete all as specified and as directed.

Returning, filling in including spreading levelling, watering and well ramming in layers n.exc 25 cm thick in layers etc completed all as specified and directed.

Removal of execavated material (soils) incl exc 250 mtr n.exc 500 mtr & deposite where directed completed all as specified.

Demolition & breaking up drain pipe (salt glazed, AC or reinforced concrete ) set in cement mortar for 150 mm internal dia of pipe completed all as specified and directed.

Demolition of cement concrete (unreinforced) of any description & in any position not otherwise specifically provided for completed all as specified and directed.

Material and labour for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in concrete bed to drain pipes, incl packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore RCC pipe completed all as specified and directed.

Material and labour for reinforced cement concrete pipes class NP - 2, laid in trenches & jointed complete with collars, bore of pipe 150 mm completed all as specified and directed.

Material and labour Cement Concrete (1:3:6) type C2 (40mm graded) in foundation filling and mass concreting completed all as specified and directed.

Material and labour for rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surface finished even and smooth without using extra cement completed all as specified and directed.

Material and labour for PCC 1:2:4 type B-1 (20 mm graded stone aggregate in coping, benching etc slightly rounded or chamfered completed all as specified and directed.

Demolition of cement concrete (reinforced) as in manholes or drain cover (reinforcement cut as required to facilitate demolition) completed all as specified and directed.

Material and labour for pre cast cement concrete cover slabs of PCC 1:2:4 Type B-1 set & jointed in CM 1:6 Note : Reinforcement shall be measured & paid separately under relevant item.

Material & labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement completed all as specified and directed.

E/M Portion

Taking down DB/main switch of any size and making good disturbed surface of wall/floor complete all as specified.

Taking down carefully sub-main wiring of any description and making good to ther disturbed surfaces to match the existing all as specified and as directed by EIC.

Material and labour for sub main wiring (concealed/ surface as required) complete with four single core 10 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 32 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 10 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Note: 5 run of 10 sqmm & one run of PVC conduit shall be measured as single unit.

Material and labour for sub main wiring (concealed) complete with two single core 6 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 6 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed.. Make of cable : Note: 3 run of 6 sqmm&one run of PVC conduit shall be measured as single unit

Material and labour for sub main wiring (concealed) complete with two single core 4 Sqmm FRLS PVC insulated unsheathed stranded copper conductor cable drawn through in and including 20 mm dia rigid non-metallic PVC conduit medium grade and conduit accessories including 4 Sqmm FRLS PVC insulated unsheated stranded copper earth cable connected to common earth dolly complete and including cutting chasing in walls for concealed wiring using machine cutting and making good the disturbed surface all as specified and directed. Make of cable : Note: 3 run of 4 sqmm&one run of PVC conduit shall be measured as single unit

Taking down carefully any type point wiring (light, fans, socket etc) complete including battens and fittings such as switch, ceiling rose, light fittings, regulators, socket, etc. and making good disturbed surface of wall/floor, etc. complete all as specified and as directed.

Material and labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit medium grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable ISI marked modular boxes ,inner and outer cover of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch

(b) One fan point controlled by one switch

(c) One exhaust fan point controlled by one switch.

(d) One switch socket outlet modular type 3 pin 6 amp on same board.

All as per item No 128 above but 1.5 sq mm cable size and 1.5 sq mm earth continuity wire for one 3 pin socket outlet, 6 amps on Independent board.

All as per item No 128 above but 2.5 sq mm cable size with 2.5 sq mm earth continuity wire for one 3 pin socket outlet, 16 Amps on independent board.

Note for Item No. 124 to 133 :- The disturbed surfaces of wall for concealing box/wiring shall be make good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. (ii) The cost of making good shall deemed to be included in quoted rate

Supply and fixing LED security light fitting 25 W made out of pressure die cast aluminium powder coated housing high impact resistant 4 mm thick toughened glass cover and matrix of power LEDs in built electronic driver up to 4 KV surge protection fitted with adjustable pole adopter to enable on site tilt angle setting and input power 25 W system lumens 85/W operating voltage 160-260 V of make : CG Cat Part No. LSTS-25-CDL :- Note :(i) Rates are deemed to be included for security ligh brackets made out of 25 mm / 20 mm dia GI medium grade tubing of suitable length and bend to shape including fixing MS flat iron clamps, bolts & nuts as per site requirement complete in all respect complete all as specified and as directed.

Taking down old Old u/s and Supply & fixing new master led tube 4ft 20 W LED batten of high-quality materials and design, Extruded aluminum housing enhances safety, High quality PC Diffuser. Reliable and robust housing structure having nominal system lumen output of 2500 lumens and a minimum system efficacy of 125 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) complete all as specified and as directed. Make : CG Cat Part No. CCS-100-20-65-HL2-DP-NWH or equivalent in Phillips/Wipro/Bajaj

Supply and fixing Surface mounting LED Luminaries and 1 x 10 Watt LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make : CG, CatPart No. TCS-104-10-65-SL-DP-NWH or equivalent in Phillips/Wipro/Bajaj

Supply and fixing Surface mounting LED Luminaries mirror light 9 Watt, 3 in 1 color LED fitting with connecting up with copper 3 core flexible cord of minimum size 1.5 Sqmm size complete all as specified and as directed . Make: Luker Cat Part No : LM3C9 or equivalent in CG/ Phillips/ Wipro/Bajaj

Supply & Fixing Decorative LED down light 36 watt recessed mounting type full lit luminaire with glare free uniform illumination with longer life and less maintenance, 2x2 Ft (>100 lm/W) complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, alongwith splite recessed mount ceiling frame kit of akuminium aloy complete all as specified and as directed. Make : CG Cat Part No. LCTLRNE-36-FO-CDL or equivalent in Phillips/Wipro/Bajaj

Taking out the existing any type fittings from ceilings and Supply and fixing new 18 Watt LED round/square recessed flat panel light pearl model with locking arrangement in ceiling with a nominal system lumen output of 1800 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70 complete all as specified and as directed. Make : CG Cat Part No. LSCRM-18W-CDL/NWor equivalent in Bajaj/Wipro/Philips.

Supply and fixing 0-4 step, one module, modular type electronic regulator for ceiling fan 1200 mm sweep, 240 volts, 100 Watts humfree single pole, all as specified and as directed. Make : Legrand Cat No. 675531 or equivalent in Havels/ L & T

Supply and fixing Switch modular type, single pole one way 6 Amps, 230 volts Ac suitable for modular switch boxes without indicator, all as specified and as directed. Make : Legrand Cat No. 675501 or equivalent in Havels/ L & T

Supply and fixing socket modular type 6 Amps 3 pin 2 module 230 volts all as specified and as directed. Make : Legrand Cat No. 675551

Supply and fixing for ceiling rose, surface bakelite, 65 x 50 mm, two to three terminals all as specified and as directed

Supply and fixing socket modular type 6/16 Amps, 3 pin combine, 2 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675555 or equivalent in Havells/ L & T

Supply and fixing switch modular type 16 Amps,one way with indicator, 1 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675513 or equivalent in Havells/ L & T

Supply and fixing power unit for upto 2 ton AC and geyser up to 3.5 KW modular type , 4 module,230 volts all as specified and as directed. Make : Legrand Cat No. 675558 or equivalent in Havells/ L & T

Supply and fixing sheet metal enclosures for DB's for incorporating MCBs, TPN, 4 way, IP-43 with metal double door, 415 volts, as per IS-8623 including taking down the old Old u/s TPN DB, all as specified and as directed. Make : Legrand Cat No 507670 or equivalent in Havells/ L & T

Supply and fixing MCB TPN, 40-63 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. Make : Legrand Cat No. 408683 or equivalent in Havells/ L & T

Supply and fixing sheet metal enclosures for SPN DB's with metal double door for incorporating MCBs,IP-43 , 12 way, 240 volts, as per IS-8623 complete all as specified and as directed. Make : Legrand Cat No 507612 or equivalent in Havells/ L & T

Supply and fixing MCB SPN, 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc.complete all as specified and as directed. Make : Legrand Cat No. 408617 or equivalent in Havells/ L & T

Supply and fixing MCB SP 6-32 Amps, breaking capacity 10 KA 'C' curve confirming to IS/IEC 60898-1 2002,integrated label holder, sliding bottom clamp , IP 20 protected terminal, sliding shutters, 240 volts, 50 HZ including making necessary incoming and outgoing electrical connection with suitable size of copper lugs etc. complete all as specified and as directed. Make : Legrand or equivalent in or equivalent in Havells/ L & T

Taking down old exhaust fan and depositing it to E/M store and refixing the same exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and as directed.

Supply & Fixing New Exhaust fan PVC body 10" ( 250 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Supply & Fixing New Exhaust fan heavy duty metal body 18" ( 450 mm) sweep 230 V, 50 Hz, complete with all accessories & connector etc internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed.

Taking down fan of any size and any make, sealing cable end, dismantling the fan blade and removing fan and blade to store complete all as specified and as directed.

Hanging only ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and as directed.

Supply and fixing Energy saving ceiling fan 1200 mm sweep min air delivery 210 CFM with double ball bearing in opal white colour and BEE 5 star rated BLDC complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed.

Supply & fxing, testing of water heater storage vertical type of capacity 25 Ltrs, 5 Star rating, rated presuure of 8 bar,unique polymer coating tech, special titanium enamelled heating element of capacity upto 2 KW, special deflector alongwith grouting and fixing with suitable size of nuts and bolts fixing in the wall with PCC 1:2:4 type BI using 20 mm graded stone aggregate and making good the disturb sufrace including electric and water connection complete all as specefied and directed .

Supply & fxing wall mounted fan hi speed of size 16" plastic body including all acessories and connected material complete all as specefied and directed.

Dismantling of 1.5/2 TR capacity of split type Acs and removing of existing indoor/outdoor units, including MS angular frame /MS channels, copper tube , foundation frames etc, complete and closing of holes of pipe line and drain water opening and making surface good with plastering and painting to match the existing colour of walls complete all as specefied and directed.

Fixing of 1.5/2TR capacity of split type Acs indoor& outdoor units including MS chanels, modification of copper tubes including installation foundation frames of out door unit complete and provision of opening of through holes for pipe line and drain water in brick/stone masonary wall and disturbed surface making good with plastering and painting to match existing colour of walls complete all as specefied and directed. Notes: (i) Item obtained from the above ser No 160 shall be reused. (ii) The cost of extra length of copper tubing including insulation (if required) at site shall deemed to be included in quoted rate. No extra payment shall made to contractor for extra piping. (iii) All necessary cutting of POP/ ceiling/wall if required shall deemed to be included in the quoted rate.

Supply and fix PVC rigid conduit pipe 20/25 mm dia including all accessories and necessary saddles with fixing screwa, gutties etc.for drain out water complete all as specefied and directed.

Rajveer Infrastucture (BID ID -3360788)

Dua Construction (BID ID -3361122)

Bidder Name

Rajveer Infrastucture

M/s Ashwin Bhange

Dua Construction