Improvement by Renovation of existing central office building SE C HP Erode at Erode

Special repair works

Dismantling and erection of existing shed PPGI sheet of 0.44 mm thick powder coated roll forming profile for roof with necessary channels made up of structural steel for vertical and horizontal supports and painting with 2 coats of enamel paint, necessary foundation for structural columns and finishing line with adjacent flooring area, including cost of material, labour lead, lift etc complete.

Dismantling of brick / stone masonry in cement mortar walls under height of 3m including initial lead of 10m and clearing away from the site and same disposing with additional transporting of 5km lorry leads and lifts etc., complete as directed by the engineer at site

Dismantling of doors and windows including removal of frames, hinges and clearing away from the site as directed by the engineer at site

Dismantling of Mosaic flooring with PCC in the existing Building including initial lead of 100m for removal of debris from the site

Earth work excavating and depositing on bank with initial lead of 10m and initial lifd of 2m in hard stiff clay. Stiff black cotton soil, hard red earth, shales, murram, gravel, stoney earth and earth mixed with small size boulders, as per standard specification, etc., complete.

Earth work excavating and depositing on bank with initial lead of 10m and initial lift of 2.0m in soft disintegrated rock, laterite, soft rock (or) kankar not requiring blasting, as per standard specification, etc., complete.

Earth work excavating and depositing on Bank with initial lead of 10m and initial lift of 2m in medium rock and dense medium rock not requiring blasting, as per standard specification, etc., complete.

Filling with M. sand for filling the foundation and floor including M. sand, filling charges, with all leads and lifts, watering, consolidation etc., complete.

Providing Plain cement concrete 1:4:8 using 40mm size of graded HBG stone for foundation, including cost of all materials, shuttering charges, labour, curing charges, lead lifts etc., complete.

Plain cement concrete in CC 1:3:6, using 40mm HBG metal for flooring including cost of cement, all materials, labour charges including consolidation, curing, all leads, lifts, as per standard specification etc., complete.

Random rubble masonry in CM 1:5 mix using good quality rough stone for foundation and basement including cost of all materials, labour, lead and lift etc., complete.

Providing Brick work in CM 1:5 using clay burnt bricks for super structure including cost of all materials, labour charges, curing scaffolding charges, curing all leads and lifts etc., complete and as directed by Engineer.

Refilling the foundation and basement with excavated earth other sand with all leads and lifts, watering, consolidation etc., complete as per standard specification and as per direction of the Engineer in charge.

Reinforced cement concrete in C.C. 1:1 ½ :3 mix using 12 to 20mm HBG machine crushed metal for plinth beam, Lintel, Sill beams, Tie beams including cost of cement, all materials, labour, curing, vibration charges, with shuttering all leads, lifts, as per standard specification, etc., complete. (but excluding cost of steel reinforcement.)

Providing steel reinforcement MS/RTS rods for all reinforced concrete works, including cost of steel MS/RTS rods, binding wire, labour charges for cutting, straightening bending as per type design drawing, placing aligning, and tying properly with all leads and lift as per standard specification, etc., complete.

Providing anti-termite treatment over the plinth area of building (Foundation stage, flooring stage and outside of the building) including cost of approved chemical, lead, lift, etc. complete

Plastering with CM 1:5,12 mm including cost of cement for Inner/Outer walls including labour, curing, all leads and lifts etc., complete as per standard specification. Ground Floor.

Outer/Inner colour washing with two coats using ready mixed Exterior/ Interior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior/ Interior emulsion water based primer exterior /Interior surfaces with three coats of wall putty including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete as directed by the engineer at site.

Colour washing with two coats using ready mixed Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of primer including through scrapping, clean removal of dirt, cost of all materials, scaffolding, Labour, Lead, Lift etc., complete as directed by the engineer at site.

Supply and fixing of AC Exhaust fan 375 mm (15'') Sweep (Heavy Duty) including cost of all materials, labour charges, all lead, lift etc., complete.

Painting with ready mixed Varnish of approved quality two coats for old wood work including cost of all materials, lead and lift etc., (complete).

Painting the existing iron works for Grilled windows with two coat of approved enamel paint over a existing painting including cost of scrapping all materials, labour, leads, lifts, etc complete.

Supplying and laying of Double Charged Vitrified tiles of size 600X600X8mm approved quality and colour with ISI std and pointing with filling materials using 0.40kg/m2 including finishing the joint , and pointing flush with tile surface including cost of all materials, lead, lift, labour, curing etc., complete as directed by the engineer at site.

Weathering course with PCC 1:1.5:3 using 6 mm HBG stone over R.C.C. roof slab, for required depth of 50 mm for giving required slope and thickness to roof as required and laying one course of solar reflective tiles of 305 mm x 305 mm x 7mm thick using CM 1:3,and pointed with the white cement including cost of cement, all materials, labour, curing, all leads and lifts, etc., complete as per standard specification.

Supplying and fixing in position of colour hand wash basin without pedestal of 550x400mm size of approved make including cost of all materials such as Cast Iron brackets, 32mm dia CP waste coupling, Rubber Plug and chain, 32mm dia 'B' class GI waste pipe, 15mm dia GM wheel valve, 15mm dia nylon connection, 15mm dia brass nipples, 15mm CP pillar tap, labour leads and lifts etc., complete and as directed by Engineer at site.

Supplying and fixing best quality of Special type mirror 1000 x 780mm mirror with SS soap tray, 600 mm SS towel rod, screw and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing best quality of mirror of size 600x450mm mirror with SS soap tray, 600 mm SS towel rod, screw and fixing near the wash basin teak wood round block including cost of all materials, labour, lead, lift, etc., complete.

Supplying and fixing of single box Street light type with Led 60 W light fittings with ISI mark with GI pipe stand pipe for exterior light unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete. ( philips/Crompton make ).

Wiring with 2.50 sq mm PVC unsheathed multi strand copper cable of 650 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with flush mounting boxes (GI) with continuous earth wire connection 1.50 Sq mm PVC insulated copper wire and making good the damaged portion of masonry for PVC concealed light / fan point as directed by the engineer at site.

Supplying and fixing of 4’ 20W single LED Tube light and fittings complete with ISI mark, electronic choke and condenser with PVC unsheathed leads from terminal to the fittings with tube including cost of all materials, lead, lift, fixing charges etc., complete. ( philips/Crompton make ).

Wiring with 2.50 Sq mm PVC unsheathed multi strand copper cables of 650V Grade in Suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable flush mounting boxes (GI) for 5 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 1.50 Sq mm PVC insulated copper wire and making good the damaged portion of masonry of PVC concealed plug point. (Make : Legrand)

Wring with 2.50 Sq mm PVC unsheathed multi strand copper cables of 650V Grade in Suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall using suitable flush mounting boxes (GI) for 15 A 3 pin non inter locking CS plug including pin top with continuous earth wire connection using 1.50 Sq mm PVC insulated copper wire and making good the damaged portion of masonry of PVC concealed plug point. ( Make: Legrand )

Supplying and fixing of 1200mm (48”) sweep AC ceiling fan with 300 / 600 mm down rod with appd. best quality make of standard specification with electronic regulators and switch including cost of all materials, labour, fixing, charges as per standard specification, etc., complete. ( Make : Crompton)

Supply and run of 2 of 4 sqmm (56/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V Grade in suitable PVC rigid pipe on wall and ceiling with continuous earth wire connection of 1.50 Sq mm PVC insulated copper wire with painting of suitable colour as directed by the engineer at site.

Supplying and fixing in position aluminium partition partly glazed & partly paneled above 12mm thick both side pre laminated boards [ Novanpan or Equivalent] and 5mm thick machine frosted float glass 9modi, saint gobine or Equivalent0 using aluminium box section of not less than 63x38.4x2mm x 1.174kg/m for vertical @ 955mm c/c approx and horizontals[4Nos] including cost of all materials, labour, lead, lift T&P etc. complete -1 M2

Supplying and fixing of aluminium anodized heavy section outer frame with single door fabricated with 5.2mm plain glass fully/partially (or) fixed with duraflux or Novopan board of 12mm thick, fully on partially locking arrangements, handle including cost of all materials with lead lift, etc. complete as per standard specification.

Design, fabrication, supplying and erection of shed using PPGI sheet of 0.44 mm thick powder coated roll forming profile with designed sheets for roof lean to roof with necessary channels made up of structural steel for horizontal supports and painting with enamel paint including cost of material, labour, lead, lift, etc., complete.

Supplying and fixing of Lane cable with suitable PVC Rigid pipe including materials, labour charges etc (Lane cable will be supplied by Department)

Dismantling and erection of existing Aluminium Partitions including cost of labour, lead, lift T&P etc., complete as directed by department Engineer at site.

Providing and fixing of gyp board false ceiling from floor level 12 mm thick, perforated sheets including providing openings for AC, Lighting and other auxiliary works, as directed by the Engineer in charge including cost of all materials, T&P’s labour charges, leads, lifts, etc., complete.