Complete repairing, rectification works with spares full overhauling and maintenance works of one Rana make Tagger haulage assembly and its base frame of 7, 8 incline

Amount

Rana tagger haulage shaft damaged bearing seats welding, and machining as per bearing size and alignment checking, straightening, thread cleaning etc.

Damaged bearing housing of haulage drums mounting bracket welding and machining as per bearing size

Haulage drum damaged and worn out bearing seat repairing by CI welding by C I electrodes and machining by hand operated lathe machine.

2nd motion pinion damaged and broken teeth repairing by material depositing by cast steel electrodes and machining and its shaping by grinding and matching with drive pinion

Gun metal thrust bearing making as per sample with casting, machining, boring, grooving etc for balancing.

Tagger gear bearing housing damaged bearing seat CI welding and machining as per bearing size.

All threads cleaning, new threads making, over size threads making.

Old and damaged brake lining cutting and fixing as reqd.size.

Brake lining complete new making with liner as per sample size

Rana Tugger haulage sun pinion, star pin ion, drive pinion, master pinion all teeth’s checking one by one and its cheeps cleaning by grinding/shaping.

All pinions, body and bearing cleaning, washing & greasing.

Bearing 6213 (NTN) new providing and fitting.

Bearing 6315(NTN) new providing and fitting.

Bearing 6215 (NTN) new providing and fitting.

Bearing 6217(NTN) new providing and fitting.

Rana haulage repair kit like as keys, H.T. Allen bolts, hexagonal head bolts, spring washer etc.

Rana tugger haulage clutch and break operating accessories new making and fabricating as per required size and measurement like pins, clutch bolts, studs, adjusting handle, ‘U’ gutki, bolts and nuts etc.

Complete dismantling, full overhauling, all pinions and bearing cleaning greasing, resetting, assembling after repairing.

Base frame

Girder 10/05”size cutting in welded part about 03”X 20 mouth=

Girder 10/05”sizecutting by gas set 08 mouths= (20”X 8 Nos.)=

10/05”size channel cutting by gas set- 18 mouth= (20”X 18)=

3”X 5”angle cutting by gas set 20mouth= (3”+ 5”) X 20 Nos.=

Girder welding outer and inner 04 mouths in double layer= (20”X 04 X 02 X 02)

10/05” size channel welding 10 mouth inner and outer 02 layer= (20”X 10 X 02)

Plate cutting (5/8”X 05”square) X 04 Nos. =

Hole making in channel 3/4” size

Angle support welding in girder at different places for extra strength=(3”+ 3”) X 2 X16Nos.

Washer cutting 3” square 16 Nos.= (12”X 16) =

Hole making in washer 3/4”

Foundation bolt making as per size 300mm long X 24mm dia

Total impact of GST for the purpose of CTC

M/S VIVEK ENTERPRISES

MAA BHAGWATI ENTERPRISES