SYSTEM TENDER NO NIT NO: 132/S.E.E/M Raipur /2026-27 Dated:.14-10-2026

Supplying and laying one number following sizes XLPE, steel armoured, aluminium conductor power cable of 33 KV grade direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as per specification and IS: 7098 (2011, Part 2).17.1.9 3 x 400 sq mm

Supplying and making OUTDOOR cable end jointing with heat shrinkable cable jointing kit including lugs and other jointing materials, for following size of 3 core, XLPE aluminum conductor cable of 33 KV grade as per specification. :17.12.9 400 sq. mm

Supplying and making STRAIGHT THROUGH cable jointing with heat shrinkable cable jointing kit including ferrule and other jointing materials, for following size of 3 core, XLPE aluminum conductor cable of 33 KV grade as per specification. : 17.13.9 400 sq. mm

Supplying and laying HDPE pipe of 4kg/Sqcm in ground below road, path etc at a depth not less than 40 cm and upto 90 cm including excavation, dismantling of road if required and refilling the trench with excavated material, ramming and making the surface good etc. as per specification.14.2.6 160 mm outer dia

Supply of "H" beam steel pole as per IS specifications in standard length for over head line work:19.1.2 "H" beam steel pole 152x152x7x12 mm standard weight 37.1 kg /metre

Supply of steel R.S. JOIST as per IS specifications in standard length for over head line work:19.2.1 Designation ISMB200 size 100x200x10.8x5.7mm weight 25.4 kg /metre

Designation ISMB175 size 175x90x8.6x5.5mm weight 19.3 kg /metre

Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length:19.10.6 13 metre to 14 metre

Supplying and erection of single piece nonlinear resistor type lightning arrestor suitable for 3 wire, 33 KV overhead lines with rated voltage 30 KV (rms) with a nominal discharge current rating of 10 KA (station class) and complete with galvanised clamping arrangement, G.I. bolts, nuts, washers etc. as per specification.

Supplying and fixing G.I. pipe along with wall or pole/ support with 2 Nos MS clamps for protection of under ground cable in approved manner including bolts and nuts or metal dash fasteners complete as per specification. 14.5.2 40 mm dia

Supply and fixing following overhead line accessories. 20.1.1 Stay rod (19/20mm dia 1.8 metre long) with anchor plate 300x300x6.4mm in CC

Stay wire 7/4.0mm dia

Turn buckle (19/20mmx60mm)

MV Strain insulator

Bow tightener

MV Shackle insulator 100x110mm with G.I. bolts and nuts

MV Pin insulator 100x80mm with G.I. spindle and nuts etc.

Bituminous cable compound

DC cross arm made of MS channel 100x50x5 mm @ 9.56 kg/m

Supplying and erection of stay set complete (galvanized) with 19/20mm dia x 1.8 metre long stay rod, anchor plate of size 300mm x 300mm x 6.4 mm, thimble stay clamps, turn buckle (19/20mm x 600mm), strain insulator and specified G.I. stay wire etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as per specification. 20.2.1. With 7/4.00 mm dia G.I. stay wire

Supplying and fixing of channel iron 100x50x5 mm (9.56kg/m) cross arm (1.15m long) for 4 wire overhead line complete with clamps, bolts and nuts including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Supplying and erection of MV horn gap lightening arrester.

Supplying and fixing approved make 33 KV (3x11KV) glazed porcelain disc type insulator with tension hardware on existing pole/ support/ cross arm channel as per specification complete:

Supply and erection standard ACSR (aluminium conductor steel reinforced) confirming to IS 398-1961 of approved make at existing insulator at height upto 14m from ground level including stringing, binding with insulator, jointing wherever required, jumpering, tearing off connection etc complete etc. as per specification including clearing off obstacle if any:20.32.5 Dog 6/4.72(AL), 7/1.57(S) mm dia with calculated aluminium area 105 sq.mm , weight 394 kg/ km (248 amps)

Supplying and erection DANGER BOARD made MS sheet duly painted and maked as per IE rules and specification.

Supplying and laying 8 SWG copper wire at 0.50 metre below ground level for conductor earth electrode, including soldering etc. as per specification.

Metre

Supply of "H" beam steel pole as per IS specifications in standard length for over head line work:19.1.2 "H" beam steel pole 152x152x7x12 mm standard weight 37.1 kg /metre

Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length:19.10.6 13 metre to 14 metre

Supply and fixing following overhead line accessories. 20.1.1 Stay rod (19/20mm dia 1.8 metre long) with anchor plate 300x300x6.4mm in CC

Stay wire 7/4.0mm dia

Turn buckle (19/20mmx60mm)

MV Strain insulator

Bow tightener

MV Shackle insulator 100x110mm with G.I. bolts and nuts

MV Pin insulator 100x80mm with G.I. spindle and nuts etc.

Bituminous cable compound

DC cross arm made of MS channel 100x50x5 mm @ 9.56 kg/m

Supplying and erection of stay set complete (galvanized) with 19/20mm dia x 1.8 metre long stay rod, anchor plate of size 300mm x 300mm x 6.4 mm, thimble stay clamps, turn buckle (19/20mm x 600mm), strain insulator and specified G.I. stay wire etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as per specification.20.2.1 With 7/4.00 mm dia G.I. stay wire

Supplying and fixing of channel iron 100x50x5 mm (9.56kg/m) cross arm (1.15m long) for 4 wire overhead line complete with clamps, bolts and nuts including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Supplying and erection of MV horn gap lightening arrester.

Supplying and fixing approved make 11 KV glazed porcelain disc type insulator with tension hardware on existing pole/ support/ cross arm channel as per specification complete:

Supply and erection standard ACSR (aluminium conductor steel reinforced) confirming to IS 398-1961 of approved make at existing insulator at height upto 14m from ground level including stringing, binding with insulator, jointing wherever required, jumpering, tearing off connection etc complete etc. as per specification including clearing off obstacle if any: 20.32.4 Raccoon 6/1/4.09mm dia with calculated aluminium area 78.83 sq.mm , weight 319 kg/ km (198 amps)

Dog 6/4.72(AL), 7/1.57(S) mm dia with calculated aluminium area 105 sq.mm , weight 394 kg/ km (248 amps)

Supplying and erection DANGER BOARD made MS sheet duly painted and maked as per IE rules and specification.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)

Supplying and erection of 11 KV gang operated air break switch on existing two pole structure with insulators and all other accessories complete including locking arangement as per specification.

Supply of "H" beam steel pole as per IS specifications in standard length for over head line work: 19.1.2 "H" beam steel pole 152x152x7x12 mm standard weight 37.1 kg /metre

Erection of STEEL TUBULAR or "H" BEAM/ ISMB pole in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation and cement concrete collar of size 0.4 metre dia and 0.50 metre height from ground level including excavation and refilling etc. as per specification of length: 19.10.8 13 metre to 14 metre

Supply and fixing following overhead line accessories. 20.1.1 Stay rod (19/20mm dia 1.8 metre long) with anchor plate 300x300x6.4mm in CC

Stay wire 7/4.0mm dia

Turn buckle (19/20mmx60mm)

MV Strain insulator

Bow tightener

MV Shackle insulator 100x110mm with G.I. bolts and nuts

MV Pin insulator 100x80mm with G.I. spindle and nuts etc.

Bituminous cable compound

DC cross arm made of MS channel 100x50x5 mm @ 9.56 kg/m

Supplying and erection of stay set complete (galvanized) with 19/20mm dia x 1.8 metre long stay rod, anchor plate of size 300mm x 300mm x 6.4 mm, thimble stay clamps, turn buckle (19/20mm x 600mm), strain insulator and specified G.I. stay wire etc. in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as per specification.20.2.1 With 7/4.00 mm dia G.I. stay wire

Supplying and fixing of channel iron 100x50x5 mm (9.56kg/m) cross arm (1.15m long) for 4 wire overhead line complete with clamps, bolts and nuts including drilling of holes for insulator pins, bolts and nuts etc as per specification.

Supplying and erection DANGER BOARD made MS sheet duly painted and maked as per IE rules and specification.

Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, unarmoured, aluminium conductor power cable of 1.1 KV grade on surface/ existing cable tray with 25x3 mm MS flat clamp and steel dash fastener/ G.I. bolts and nuts as per specification, IS: 1554 (1988, Part 1) / IS: 7098 (1988, Part 1). 15.9.2 3.5 x 70 sq. mm.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as per specification.

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal and salt as per specification and IS Code 3043: 1987(R 2016)